Vertcoin - 1 | ASIC - 0 | Lyra2RE | Decentralised | GPU Mineable | Open Source

[mrbodz]

segwit doesnt just allow capacity increases. It fixes transaction malleability. It also allows cross chain swaps. E.G. you could do on-chain exchanges between BTC-VTC or any other segwit enabled coin eventually

[1714011624]

1714011624

[akidokatsui]

hello,


my latest wallet version v0.13.99.0 stuck at block 664599

try downgrade wallet to  v0.10.0.2 error say wallet.dat need latest wallet version

so i can't sent vertcoin to exchange


how to fix that problem ?


please help me

You need to delete the block and chainstate folders and resync with v10.0.2. You may also have to use a back up wallet.dat if the fresh resync does not work by itself.

still error. error say :

 wallet.dat need latest wallet version

how to fix that prblem?. please help me

[Lercker]

hello,


my latest wallet version v0.13.99.0 stuck at block 664599

try downgrade wallet to  v0.10.0.2 error say wallet.dat need latest wallet version

so i can't sent vertcoin to exchange


how to fix that problem ?


please help me

You need to delete the block and chainstate folders and resync with v10.0.2. You may also have to use a back up wallet.dat if the fresh resync does not work by itself.

still error. error say :

 wallet.dat need latest wallet version

how to fix that prblem?. please help me

Was the installation of v13.99 a fresh install? or was it an upgrade? Sounds like your wallet.dat might be corrupted. You might need to join vert slack and get direct help from a dev. Etang6000 has posted the invite multiple times and will hopefully do again if he reads this...

[etang6000]

hello,


my latest wallet version v0.13.99.0 stuck at block 664599

try downgrade wallet to  v0.10.0.2 error say wallet.dat need latest wallet version

so i can't sent vertcoin to exchange


how to fix that problem ?


please help me

You need to delete the block and chainstate folders and resync with v10.0.2. You may also have to use a back up wallet.dat if the fresh resync does not work by itself.

still error. error say :

 wallet.dat need latest wallet version

how to fix that prblem?. please help me

Was the installation of v13.99 a fresh install? or was it an upgrade? Sounds like your wallet.dat might be corrupted. You might need to join vert slack and get direct help from a dev. Etang6000 has posted the invite multiple times and will hopefully do again if he reads this...

https://www.reddit.com/r/vertcoin/comments/5toesj/joining_vertcoin_slack_just_got_easier/?utm_content=title&utm_medium=hot&utm_source=reddit&utm_name=vertcoin

[akidokatsui]

hello,


my latest wallet version v0.13.99.0 stuck at block 664599

try downgrade wallet to  v0.10.0.2 error say wallet.dat need latest wallet version

so i can't sent vertcoin to exchange


how to fix that problem ?


please help me

You need to delete the block and chainstate folders and resync with v10.0.2. You may also have to use a back up wallet.dat if the fresh resync does not work by itself.

still error. error say :

 wallet.dat need latest wallet version

how to fix that prblem?. please help me

Was the installation of v13.99 a fresh install? or was it an upgrade? Sounds like your wallet.dat might be corrupted. You might need to join vert slack and get direct help from a dev. Etang6000 has posted the invite multiple times and will hopefully do again if he reads this...

https://www.reddit.com/r/vertcoin/comments/5toesj/joining_vertcoin_slack_just_got_easier/?utm_content=title&utm_medium=hot&utm_source=reddit&utm_name=vertcoin

yes, v13.99 a fresh install. my wallet.dat not corrupt. run normal on v13.99.

how to fix that problem ?. please help me

[etang6000]

hello,


my latest wallet version v0.13.99.0 stuck at block 664599

try downgrade wallet to  v0.10.0.2 error say wallet.dat need latest wallet version

so i can't sent vertcoin to exchange


how to fix that problem ?


please help me

You need to delete the block and chainstate folders and resync with v10.0.2. You may also have to use a back up wallet.dat if the fresh resync does not work by itself.

still error. error say :

 wallet.dat need latest wallet version

how to fix that prblem?. please help me

Was the installation of v13.99 a fresh install? or was it an upgrade? Sounds like your wallet.dat might be corrupted. You might need to join vert slack and get direct help from a dev. Etang6000 has posted the invite multiple times and will hopefully do again if he reads this...

https://www.reddit.com/r/vertcoin/comments/5toesj/joining_vertcoin_slack_just_got_easier/?utm_content=title&utm_medium=hot&utm_source=reddit&utm_name=vertcoin

yes, v13.99 a fresh install. my wallet.dat not corrupt. run normal on v13.99.

how to fix that problem ?. please help me

Do not use v0.13.99.0 !

use v0.10.0.2     here's the link https://github.com/vertcoin/vertcoin/releases

[jwinterm]

...

yes, v13.99 a fresh install. my wallet.dat not corrupt. run normal on v13.99.

how to fix that problem ?. please help me

If you created the wallet on v13.99 and it's not compatible with the older wallet, then maybe the only thing you can do is go to the console in v13.99 wallet and dumpprivkey for any address with coins, then use the old wallet to import the private keys. If you mined coins on the bad fork using the new wallet though, those coins won't exist anymore...

[akidokatsui]

...

yes, v13.99 a fresh install. my wallet.dat not corrupt. run normal on v13.99.

how to fix that problem ?. please help me

If you created the wallet on v13.99 and it's not compatible with the older wallet, then maybe the only thing you can do is go to the console in v13.99 wallet and dumpprivkey for any address with coins, then use the old wallet to import the private keys. If you mined coins on the bad fork using the new wallet though, those coins won't exist anymore...

try import private key from wallet.dat create use v 0.13.99 to wallet v0.10.0.2 but say invalid private key.

[jwinterm]

...

yes, v13.99 a fresh install. my wallet.dat not corrupt. run normal on v13.99.

how to fix that problem ?. please help me

If you created the wallet on v13.99 and it's not compatible with the older wallet, then maybe the only thing you can do is go to the console in v13.99 wallet and dumpprivkey for any address with coins, then use the old wallet to import the private keys. If you mined coins on the bad fork using the new wallet though, those coins won't exist anymore...

try import private key from wallet.dat create use v 0.13.99 to wallet v0.10.0.2 but say invalid private key.

That seems...unlikely. Are you sure you ran "dumpprivkey [address]" from your console?

How many coins were in the 13.99 wallet if you don't mind me asking? And how did you get them there? Mining on new release?

[akidokatsui]

...

yes, v13.99 a fresh install. my wallet.dat not corrupt. run normal on v13.99.

how to fix that problem ?. please help me

If you created the wallet on v13.99 and it's not compatible with the older wallet, then maybe the only thing you can do is go to the console in v13.99 wallet and dumpprivkey for any address with coins, then use the old wallet to import the private keys. If you mined coins on the bad fork using the new wallet though, those coins won't exist anymore...

try import private key from wallet.dat create use v 0.13.99 to wallet v0.10.0.2 but say invalid private key.

That seems...unlikely. Are you sure you ran "dumpprivkey [address]" from your console?

How many coins were in the 13.99 wallet if you don't mind me asking? And how did you get them there? Mining on new release?

yes, i  ran "dumpprivkey [address]" from my console

we have over 150k VTC. my address: http://explorer.vertcoin.info/address/VbpTa2zZU37v1fEUGd7TZpdCHvwSCKucK3

we get buy from poloniex

So it looks like if i open up 0.13.99 without an existing wallet the HD key option is on by default

If if open 0.13.99 with an existing wallet file in place, HD key is off

So basically if i started with 0.13.99, taking the backwards step won't happen

with the standard method anyhow

so how do you export an HD key to make it compatible with an older version?

[jwinterm]

...

yes, v13.99 a fresh install. my wallet.dat not corrupt. run normal on v13.99.

how to fix that problem ?. please help me

If you created the wallet on v13.99 and it's not compatible with the older wallet, then maybe the only thing you can do is go to the console in v13.99 wallet and dumpprivkey for any address with coins, then use the old wallet to import the private keys. If you mined coins on the bad fork using the new wallet though, those coins won't exist anymore...

try import private key from wallet.dat create use v 0.13.99 to wallet v0.10.0.2 but say invalid private key.

That seems...unlikely. Are you sure you ran "dumpprivkey [address]" from your console?

How many coins were in the 13.99 wallet if you don't mind me asking? And how did you get them there? Mining on new release?

yes, i  ran "dumpprivkey [address]" from my console

we have over 150k VTC. my address: http://explorer.vertcoin.info/address/VbpTa2zZU37v1fEUGd7TZpdCHvwSCKucK3

we get buy from poloniex

So it looks like if i open up 0.13.99 without an existing wallet the HD key option is on by default

If if open 0.13.99 with an existing wallet file in place, HD key is off

So basically if i started with 0.13.99, taking the backwards step won't happen

with the standard method anyhow

so how do you export an HD key to make it compatible with an older version?

Oh I see. That is interesting that private keys generated from the HD seed wouldn't be compatible with an older version of the wallet, but I guess you have tried. Maybe you should try to chat with jamesl22 or ahmed_ on IRC or slack - they might have some better ideas.

[akidokatsui]

...

yes, v13.99 a fresh install. my wallet.dat not corrupt. run normal on v13.99.

how to fix that problem ?. please help me

If you created the wallet on v13.99 and it's not compatible with the older wallet, then maybe the only thing you can do is go to the console in v13.99 wallet and dumpprivkey for any address with coins, then use the old wallet to import the private keys. If you mined coins on the bad fork using the new wallet though, those coins won't exist anymore...

try import private key from wallet.dat create use v 0.13.99 to wallet v0.10.0.2 but say invalid private key.

That seems...unlikely. Are you sure you ran "dumpprivkey [address]" from your console?

How many coins were in the 13.99 wallet if you don't mind me asking? And how did you get them there? Mining on new release?

yes, i  ran "dumpprivkey [address]" from my console

we have over 150k VTC. my address: http://explorer.vertcoin.info/address/VbpTa2zZU37v1fEUGd7TZpdCHvwSCKucK3

we get buy from poloniex

So it looks like if i open up 0.13.99 without an existing wallet the HD key option is on by default

If if open 0.13.99 with an existing wallet file in place, HD key is off

So basically if i started with 0.13.99, taking the backwards step won't happen

with the standard method anyhow

so how do you export an HD key to make it compatible with an older version?

Oh I see. That is interesting that private keys generated from the HD seed wouldn't be compatible with an older version of the wallet, but I guess you have tried. Maybe you should try to chat with jamesl22 or ahmed_ on IRC or slack - they might have some better ideas.

problem fixed. my wallet.dat back normal now. thank you for your support

[usukan]

Cryptsy Cryptocurrency Settlement
Case No.: 9:16-cv-80060

http://www.cryptsysettlement.com/

If you are a CRYPTSY account holder and are unable to access your CRYPTOCURRENCY, you could get money from two different class action settlements, and an ongoing class action lawsuit may affect your rights. PLEASE READ THE NOTICE CAREFULLY.

Important Dates

April 17, 2017 - Deadline to Request Exclusion (must be postmarked by this date)

May 3, 2017 - Deadline to Object (must be postmarked by this date)

May 17, 2017 - Deadline to submit a Claim Form (must be submitted online by or postmarked by this date)

June 2, 2017 at 10:00 A.M. - Fairness Hearing

[www.www]

LTC progresses. New activation period began with the support of 20%.
Any VTC news? Or runner fizzled 

[silencesilence]

LTC progresses. New activation period began with the support of 20%.
Any VTC news? Or runner fizzled 

jamesl22 [9:52 PM]
I'm going to release a new 0.10.* wallet first

[9:52] 
With some updates

[9:53] 
Then a 0.13.* wallet with SegWit

[9:53] 
This is mostly to ensure that old version wallets can still propagate transactions

Joining Vertcoin slack just got easier -> https://slack.vtconline.org/

[hoop]

Joining Vertcoin slack just got easier -> https://slack.vtconline.org/

Is Joining Vertcoin slack needs an invitation?

[etang6000]

Joining Vertcoin slack just got easier -> https://slack.vtconline.org/

Is Joining Vertcoin slack needs an invitation?

No, click on the link and enter an email

 https://slack.vtconline.org/

[sesko]

Wallet update – v0.10.1.0

https://vertcoin.org/wp/wallet-update-v0-10-1-0/

[silencesilence]

Wallet update – v0.10.1.0

https://vertcoin.org/wp/wallet-update-v0-10-1-0/

This is great
step by step to SegWit

[CULTFRANCE16]

So, you do not need Hard Fork? SegWit comes there, Great news.