◈◈Bitcredit ◈◈ Migrating to UniQredit◈◈

[dragos_bdi]

It would be very useful to add a compiled linux version for those that can't do it yourself like me for cheap ram starving vps.

Just like dragos did it so far here http://82.211.1.181/bitcredit/

Thanks to bitcreditscc the 82.211.1.181 respond now to bitcredits.pw.

http://bitcredits.pw/downloads/

Here it's a script made by me to update automatically the binaries (updatebcr.sh).
Who wants to do it manually, "latest.tar.bz2" is the last archive with the most up2date version build by me.

Till I will write a script to do a nightly build from source, I'll try to maintain the binaries manually.

 
For those interested, for different debates (developments, support) the forum on http://bitcredits.pw can be a good start.

Thanks !

[1714791915]

1714791915

[1714791915]

1714791915

[1714791915]

1714791915

[thelonecrouton]

Fiddled a bit more with the UI. Please tell me you like the toolstripe across the bottom as it took me fecking eons to get the bloody thing centred there.  



Moving it down there makes things a bit less cluttered I think, and allows enough space for the logo to be just about legible.

[bitcreditscc]

Fiddled a bit more with the UI. Please tell me you like the toolstripe across the bottom as it took me fecking eons to get the bloody thing centred there. 

da fuq with that balance? $$$$

I LOVE THE NEW LOOK!!!

[thelonecrouton]

I LOVE THE NEW LOOK!!!

Thanks. I made the scollbars a bit fatter, got rid of the background gradient as it was making consistent widget background colour a PITA, it all looks much much nicer. Tooltip decor is still a bit inconsistent in places but I'll get there.

Also redid the splashscreen, which is a highly important and critical feature as you know... 

[starblocks]

Fiddled a bit more with the UI. Please tell me you like the toolstripe across the bottom as it took me fecking eons to get the bloody thing centred there.  



Moving it down there makes things a bit less cluttered I think, and allows enough space for the logo to be just about legible.

Looking good

One thing I noticed is the mouse over comments are a bit hard to see for people trying to figure out what's what as some were quite dark against the background (with the current wallet)

[thelonecrouton]

One thing I noticed is the mouse over comments are a bit hard to see for people trying to figure out what's what as some were quite dark against the background (with the current wallet)

Mostly fixed... QT's palette inheritance for tooltips is a bit odd and I haven't completely sussed it yet.

[Bagdar13]

After mining since launch today I have the message "Banknode Started Successfully"  ...quick question when do i see the reward posted

[bitcreditscc]

After mining since launch today I have the message "Banknode Started Successfully"  ...quick question when do i see the reward posted

Congratulations, within a few minutes you should see your first payments start to come in. Today was a very educational day for me and i can promise that having a BN is going to be a big boon for everyone.

I wish my skills as a coder would catch up with what i learn and devise.

[alganonim]

Hello, I think I have a serious problem and need a help.

I have created new empty wallet with start-many and then executed "getaccountaddress 0" which what I think should give me addresss 0

then have send from bittrex 250000.02 BCR (with fee) to this same address

Address: 6C128H6LgkBDYTf7pSz7SscYpCezcfDVmi
TxId: cb02135638a3ba60f32bb8fa533d395aee7eab509ee3423e8bfee7b314c5276d

7 hours later, still there'd no active address or TxId in block explorer, is it lost, contact bittrex or what to do ?

There's some transaction connected with this but not to my address

https://chainz.cryptoid.info/bcr/block.dws?115582.htm

[tombtc]

1. Does this have to be sent exact 250000 in one transaction like with dash or can be a bit more and in a few transactions?
2. I get this on my vps when i do

Code:

./bitcreditd: error while loading shared libraries: libboost_filesystem.so.1.54.0: cannot open shared object file: No such file or directory

[alganonim]

Does this have to be sent exact 250000 in one transaction like with dash or can be a bit more and in a few transactions?

1. One with fee, bittrex calculated 0.02 for 250k , transfered form your wallet it would be 250000.00000373

2. Install dependencies

http://176.126.241.192:8088/

http://bitcredit.wikia.com/wiki/How_to_Compile_Bitcredit

[richiela]

Hello, I think I have a serious problem and need a help.

I have created new empty wallet with start-many and then executed "getaccountaddress 0" which what I think should give me addresss 0

then have send from bittrex 250000.02 BCR (with fee) to this same address

Address: 6C128H6LgkBDYTf7pSz7SscYpCezcfDVmi
TxId: cb02135638a3ba60f32bb8fa533d395aee7eab509ee3423e8bfee7b314c5276d

7 hours later, still there'd no active address or TxId in block explorer, is it lost, contact bittrex or what to do ?

There's some transaction connected with this but not to my address

https://chainz.cryptoid.info/bcr/block.dws?115582.htm

  "confirmations" : -1,
  "txid" : "cb02135638a3ba60f32bb8fa533d395aee7eab509ee3423e8bfee7b314c5276d",


The transaction got orphaned... cut us a ticket with the info and i'll take care of it...

thanks,
richie@bittrex

[alganonim]

Hello, I think I have a serious problem and need a help.

I have created new empty wallet with start-many and then executed "getaccountaddress 0" which what I think should give me addresss 0

then have send from bittrex 250000.02 BCR (with fee) to this same address

Address: 6C128H6LgkBDYTf7pSz7SscYpCezcfDVmi
TxId: cb02135638a3ba60f32bb8fa533d395aee7eab509ee3423e8bfee7b314c5276d

7 hours later, still there'd no active address or TxId in block explorer, is it lost, contact bittrex or what to do ?

There's some transaction connected with this but not to my address

https://chainz.cryptoid.info/bcr/block.dws?115582.htm

  "confirmations" : -1,
  "txid" : "cb02135638a3ba60f32bb8fa533d395aee7eab509ee3423e8bfee7b314c5276d",


The transaction got orphaned... cut us a ticket with the info and i'll take care of it...

thanks,
richie@bittrex

Thank you , done already.

edit: sending again and after few seconds it's arleady in my wallet, great, but that was very stressful 8 hours 

[tombtc]

Does this have to be sent exact 250000 in one transaction like with dash or can be a bit more and in a few transactions?

1. One with fee, bittrex calculated 0.02 for 250k , transfered form your wallet it would be 250000.00000373

2. Install dependencies

http://176.126.241.192:8088/

http://bitcredit.wikia.com/wiki/How_to_Compile_Bitcredit

Had to do:

Code:

sudo apt-get remove libboost*

sudo apt-get purge libboost*

sudo apt-get install libboost1.54-all-dev

Works now thanks!

Now how do you check if it is synced or not? ./bitcreditd getinfo gives me an error

Code:

Error: There is no RPC client functionality in bitcreditd anymore. Use the bitcredit-cli utility instead.

[alganonim]

Does this have to be sent exact 250000 in one transaction like with dash or can be a bit more and in a few transactions?

1. One with fee, bittrex calculated 0.02 for 250k , transfered form your wallet it would be 250000.00000373

2. Install dependencies

http://176.126.241.192:8088/

http://bitcredit.wikia.com/wiki/How_to_Compile_Bitcredit

Had to do:

Code:

sudo apt-get remove libboost*

sudo apt-get purge libboost*

sudo apt-get install libboost1.54-all-dev

Works now thanks!

Now how do you check if it is synced or not? ./bitcreditd getinfo gives me an error

Code:

Error: There is no RPC client functionality in bitcreditd anymore. Use the bitcredit-cli utility instead.

./bitcreditd  - only starts a daemon, for rest of commands you use ./bitcredit-cli (start, stop, getinfo, banknode list ... )

use "./bitcredit-cli getinfo" and always check for wallet version and blocks, compare with your local wallet block info (debug window/information) or https://chainz.cryptoid.info/bcr/# and you will know.  


Questions for our specialists :

1. So if I have my first BN working, ./bitcreditd already started on my VPS, to start a second BN on the same machine I need to use something like this ?

./bitcreditd -datadir=/path/to/data/dir -conf=<file>

2. It could be the same datadir as in first BN ?

for example ./bitcreditd -conf=BN2.conf  (in the same location as default bitcredit.conf)

4. Starting a new BN, doesn't affect the first one ?

5. I know that VPS port on BN2 must be change to 9998 for example, but what with rpcport on local wallet that will initiate starting a BN2, change rpcport=8776 to 8775 ?

[tombtc]

Does this have to be sent exact 250000 in one transaction like with dash or can be a bit more and in a few transactions?

1. One with fee, bittrex calculated 0.02 for 250k , transfered form your wallet it would be 250000.00000373

2. Install dependencies

http://176.126.241.192:8088/

http://bitcredit.wikia.com/wiki/How_to_Compile_Bitcredit

Had to do:

Code:

sudo apt-get remove libboost*

sudo apt-get purge libboost*

sudo apt-get install libboost1.54-all-dev

Works now thanks!

Now how do you check if it is synced or not? ./bitcreditd getinfo gives me an error

Code:

Error: There is no RPC client functionality in bitcreditd anymore. Use the bitcredit-cli utility instead.

./bitcreditd  - only starts a daemon, for rest of commands you use ./bitcredit-cli (start, stop, getinfo, banknode list ... )

use "./bitcredit-cli getinfo" and always check for wallet version and blocks, compare with your local wallet block info (debug window/information) or https://chainz.cryptoid.info/bcr/# and you will know.  


Questions for our specialists :

1. So if I have my first BN working, ./bitcreditd already started on my VPS, to start a second BN on the same machine I need to use something like this ?

./bitcreditd -datadir=/path/to/data/dir -conf=<file>

2. It could be the same datadir as in first BN ?

for example ./bitcreditd -conf=BN2.conf  (in the same location as default bitcredit.conf)

4. Starting a new BN, doesn't affect the first one ?

5. I know that VPS port on BN2 must be change to 9998 for example, but what with rpcport on local wallet that will initiate starting a BN2, change rpcport=8776 to 8775 ?

Thanks for the help man!!
What a satistaction when I just got
 

Code:

successfully started banknode

[tombtc]

Any ideas why ./bitcredit-cli banknode list on my vps gives me 7 IP's while "banknode list" command frm my local qt wallet gives 14 Ip's?

[alganonim]

Any ideas why ./bitcredit-cli banknode list on my vps gives me 7 IP's while "banknode list" command frm my local qt wallet gives 14 Ip's?

It takes some time, even on local qt.

Glad that I could help a little. 

[tombtc]

How long does it usually take to start receiving the payments?

edit: got one already

[alganonim]

How long does it usually take to start receiving the payments?

Something like 30-60 minutes.


So after I use "bitcreditd -wallet=bn2.dat -conf=bn2.conf"  I get "Error: Cannot obtain a lock on a data directory / root/.bitcredit. Bitcredit Core is probably already running. SecureMsgDisbale: secure messaging is already disabled."

Ok, then I copied everything except wallet.dat to /.bitcredit2 and tried again , the same error, so I tried

"bitcreditd -datadir=/root/.bitcredit2/ -wallet=bn2.dat -conf=bn2.conf" then I get

Error:An error occurred while setting up the RPC address 0.0.0.0 port 8878 for listening: bind: Address already in use  ....    standard port for BN1 was 8877

so I added it to bn2.conf   rpcport=8878  , even with firewall dusabled it's still the same error.