◈◈Bitcredit ◈◈ Migrating to UniQredit◈◈

[dragos_bdi]

How long does it usually take to start receiving the payments?

Something like 30-60 minutes.


So after I use "bitcreditd -wallet=bn2.dat -conf=bn2.conf"  I get "Error: Cannot obtain a lock on a data directory / root/.bitcredit. Bitcredit Core is probably already running. SecureMsgDisbale: secure messaging is already disabled."

Ok, then I copied everything except wallet.dat to /.bitcredit2 and tried again , the same error, so I tried

"bitcreditd -datadir=/root/.bitcredit2/ -wallet=bn2.dat -conf=bn2.conf" then I get

Error:An error occurred while setting up the RPC address 0.0.0.0 port 8878 for listening: bind: Address already in use  ....    standard port for BN1 was 8877

so I added it to bn2.conf   rpcport=8878  , even with firewall dusabled it's still the same error.

use only -datadir. leave the name "wallet.dat" and "bitcredit.conf" in "-datadir". he reads all the info from default file names.

EDIT: use "port=9999".

[1714754552]

1714754552

[1714754552]

1714754552

[1714754552]

1714754552

[alganonim]

Ok will try again, but port 9999 is already in use for bn1.

EDIT: So with "bitcreditd -datadir=/root/.bitcredit2/" same error and when I change port in bitcredit.conf from 9998 to 9999 (the same as in bn1) then I get

same error +
Failed to listen on any port. Use -listen=0 if you want this.

So I will wait for the boss, he previously didn't responded how he did it.  


198.52.160.64:9994-9999 are probably his but what about 198.52.160.59:8878 this is rpcport ?

[dragos_bdi]

Ok will try again, but port 9999 is already in use for bn1.

try 9998, I saw that bitcreditscc use other ports ...

[dragos_bdi]

Currently available Pools:

http://bitcredits.pw/index.php?topic=6.0

[tombtc]

Wow someone has got 6 banknodes Is that you alganonim

[dragos_bdi]

Wow someone has got 6 banknodes Is that you alganonim

Bitcreditscc

[alganonim]

Wow someone has got 6 banknodes Is that you alganonim

I wish, not yet 

[nikos64]

New p2pool: http://crypto.office-on-the.net:8776/static/

AVAST is raising red flags.

Avast is a free toy, not an antivirus.

I checked at https://www.virustotal.com

Microsoft is a joke too... But you know, 95% of the people don't use Linux 
You guess it. I'm using AVAST and I can't get into any of your pools.

[siameze]

Does this have to be sent exact 250000 in one transaction like with dash or can be a bit more and in a few transactions?

1. One with fee, bittrex calculated 0.02 for 250k , transfered form your wallet it would be 250000.00000373

2. Install dependencies

http://176.126.241.192:8088/

http://bitcredit.wikia.com/wiki/How_to_Compile_Bitcredit

This is a very, very nice guide alganonim. I will forward this to a friend of mine that has had install issues.

[sawa]

New p2pool: http://crypto.office-on-the.net:8776/static/

AVAST is raising red flags.

Avast is a free toy, not an antivirus.

I checked at https://www.virustotal.com

Microsoft is a joke too... But you know, 95% of the people don't use Linux  
You guess it. I'm using AVAST and I can't get into any of your pools.

I'd recommend you to change this unreliable antivirus software.
I am internet provider and several times avast prevented thousands of people access to the Internet after updating.
Avast recognized windows system .dll as viruses and removed them.

[thelonecrouton]

By dint of sacrificing several goats to the Elder Gods I have got the tx symbols back, lined up, and fitting in the recent transactions area:



Might shrink 'em a bit.

[alganonim]

@siameze

It's a thelonecrouton's guides say thank you to him,  I got a few more guides for vps (dash, crave) but neither one is complete and perfect, you have to learn a few things in a hard way.

@avast

I avoid avast as much as I can, got at work over 20 licences and recently this shit is blocking our main local program, all exclusions doesn't resolve anything, deep scan module is wiser then us and can't be disabled, for a few workstations the only solution was to uninstall avast. Disabling all network sometimes also occour, avast browser plugin is even worse.

As always great work guys with wallet, new site, forum and links 

[siameze]

@siameze

It's a thelonecrouton's guides say thank you to him,  I got a few more guides for vps (dash, crave) but neither one is complete and perfect, you have to learn a few things in a hard way.

No doubt. Sometimes gremlins appear. I failed at the new build all week until I figured out I need to link to a different version of boost. It was maddening.



Also thanks to thelonecrouton! The qt fixes are appreciated.

[thelonecrouton]

@siameze

It's a thelonecrouton's guides

The compilation how-to wiki was done by dragos I think. 

[bitcreditscc]

Does this have to be sent exact 250000 in one transaction like with dash or can be a bit more and in a few transactions?

1. One with fee, bittrex calculated 0.02 for 250k , transfered form your wallet it would be 250000.00000373

2. Install dependencies

http://176.126.241.192:8088/

http://bitcredit.wikia.com/wiki/How_to_Compile_Bitcredit

Had to do:

Code:

sudo apt-get remove libboost*

sudo apt-get purge libboost*

sudo apt-get install libboost1.54-all-dev

Works now thanks!

Now how do you check if it is synced or not? ./bitcreditd getinfo gives me an error

Code:

Error: There is no RPC client functionality in bitcreditd anymore. Use the bitcredit-cli utility instead.

./bitcreditd  - only starts a daemon, for rest of commands you use ./bitcredit-cli (start, stop, getinfo, banknode list ... )

use "./bitcredit-cli getinfo" and always check for wallet version and blocks, compare with your local wallet block info (debug window/information) or https://chainz.cryptoid.info/bcr/# and you will know.  


Questions for our specialists :

1. So if I have my first BN working, ./bitcreditd already started on my VPS, to start a second BN on the same machine I need to use something like this ?

./bitcreditd -datadir=/path/to/data/dir -conf=<file>

2. It could be the same datadir as in first BN ?

for example ./bitcreditd -conf=BN2.conf  (in the same location as default bitcredit.conf)

4. Starting a new BN, doesn't affect the first one ?

5. I know that VPS port on BN2 must be change to 9998 for example, but what with rpcport on local wallet that will initiate starting a BN2, change rpcport=8776 to 8775 ?

I think you need separate folders.

[siameze]

Does this have to be sent exact 250000 in one transaction like with dash or can be a bit more and in a few transactions?

1. One with fee, bittrex calculated 0.02 for 250k , transfered form your wallet it would be 250000.00000373

2. Install dependencies

http://176.126.241.192:8088/

http://bitcredit.wikia.com/wiki/How_to_Compile_Bitcredit

Had to do:

Code:

sudo apt-get remove libboost*

sudo apt-get purge libboost*

sudo apt-get install libboost1.54-all-dev

Works now thanks!

Now how do you check if it is synced or not? ./bitcreditd getinfo gives me an error

Code:

Error: There is no RPC client functionality in bitcreditd anymore. Use the bitcredit-cli utility instead.

./bitcreditd  - only starts a daemon, for rest of commands you use ./bitcredit-cli (start, stop, getinfo, banknode list ... )

use "./bitcredit-cli getinfo" and always check for wallet version and blocks, compare with your local wallet block info (debug window/information) or https://chainz.cryptoid.info/bcr/# and you will know.  


Questions for our specialists :

1. So if I have my first BN working, ./bitcreditd already started on my VPS, to start a second BN on the same machine I need to use something like this ?

./bitcreditd -datadir=/path/to/data/dir -conf=<file>

2. It could be the same datadir as in first BN ?

for example ./bitcreditd -conf=BN2.conf  (in the same location as default bitcredit.conf)

4. Starting a new BN, doesn't affect the first one ?

5. I know that VPS port on BN2 must be change to 9998 for example, but what with rpcport on local wallet that will initiate starting a BN2, change rpcport=8776 to 8775 ?

I think you need separate folders.

If anyone is interested I was going to test running a node inside a docker container (each node in separate container). Anyone here had any experience with this?

[bitcreditscc]

By dint of sacrificing several goats to the Elder Gods I have got the tx symbols back, lined up, and fitting in the recent transactions area:



Might shrink 'em a bit.

Wow great work!!!!!!!!!  let me introduce you to my new nightmare :- coinspark.org/developers/wallet-implementation-guide

[bitcreditscc]

Does this have to be sent exact 250000 in one transaction like with dash or can be a bit more and in a few transactions?

1. One with fee, bittrex calculated 0.02 for 250k , transfered form your wallet it would be 250000.00000373

2. Install dependencies

http://176.126.241.192:8088/

http://bitcredit.wikia.com/wiki/How_to_Compile_Bitcredit

Had to do:

Code:

sudo apt-get remove libboost*

sudo apt-get purge libboost*

sudo apt-get install libboost1.54-all-dev

Works now thanks!

Now how do you check if it is synced or not? ./bitcreditd getinfo gives me an error

Code:

Error: There is no RPC client functionality in bitcreditd anymore. Use the bitcredit-cli utility instead.

./bitcreditd  - only starts a daemon, for rest of commands you use ./bitcredit-cli (start, stop, getinfo, banknode list ... )

use "./bitcredit-cli getinfo" and always check for wallet version and blocks, compare with your local wallet block info (debug window/information) or https://chainz.cryptoid.info/bcr/# and you will know.  


Questions for our specialists :

1. So if I have my first BN working, ./bitcreditd already started on my VPS, to start a second BN on the same machine I need to use something like this ?

./bitcreditd -datadir=/path/to/data/dir -conf=<file>

2. It could be the same datadir as in first BN ?

for example ./bitcreditd -conf=BN2.conf  (in the same location as default bitcredit.conf)

4. Starting a new BN, doesn't affect the first one ?

5. I know that VPS port on BN2 must be change to 9998 for example, but what with rpcport on local wallet that will initiate starting a BN2, change rpcport=8776 to 8775 ?

I think you need separate folders.

If anyone is interested I was going to test running a node inside a docker container (each node in separate container). Anyone here had any experience with this?

Never tried that, it might be interesting.

Currently struggling with colored coins so i'm no help/

[bitcreditscc]

15 BNs == 3750000 off market. Plus the lost ~ 1200000 that totals almost 5 million off market.

5 + 6 ==11 that means only 4 million is in circulation now.

[antonio8]

15 BNs == 3750000 off market. Plus the lost ~ 1200000 that totals almost 5 million off market.

5 + 6 ==11 that means only 4 million is in circulation now.

What is the lost 1.2 million coins?