Patrike.
hi.
in one pc i mined at the same time at 2 programs - 1060 card in claymors and 1070 in ewbf
in awesome miner i see only miner 1060 and 1070 not find
how i may tune in awesome 2 miner for 1 pc?
tnx.
I assume you have a setup with two Managed Miners, one for Claymore and one for EWBF? Do you see both your GPUs on the System tab when you select any of these miners? Then you can try to map the GPU information to each Managed Miner: http://www.awesomeminer.com/help/gpumapping.aspxyes i have 2 miners, both i see only 1060 card with claymors miner... ewbf not find and 1070 card not see( http://dropmefiles.com/cs20wor in one ip i can see only 1 miner? OK, so the problem is that Awesome Miner cannot get any statistics from the EWBF miner running the 1070 cards? If you connect to the EWBF with an External Miner, you need to make sure that the EWBF miner has API enabled, so you need to start it with the following command line arguments: --api 0.0.0.0:42000 This makes it possible for Awesome Miner to connect to the EWBF miner |
|
|
|
[...]
I'd rather not uninstall the program. Kind of a pain to setup everything again.
No worries. Unstalling will keep your configuration which is stored in c:\Users\[username]\AppData\Roaming\AwesomeMiner. to be very safe you can always back this up. Or use the export feature  Should have backed up.... oh well, at least it is opening now. Hi, I'm sorry to hear that your settings was lost. Awesome Miner do keep two backup files in case the primary file get corrupt. Could you send me the log file one more time after you lost the settings? If it was due to a downgrade, I might be able to find and recover your old settings in the log file, a bit depending on which log level that was used. |
|
|
|
I have a question. I cannot seem to find any options for idle detection. I know this is normally for dedicated rigs, but there is a lack of options outside of NH's own miner and their fees are pretty high.
Awesome Miner doesn't have this feature right now, becuase the software was originally not optimized for small scale mining on a single gaming computer where you want to start and stop the mining depending on computer use. This is a feature that could be supported, so I will make a note of this request and add it in future versions. |
|
|
|
Patrike.
hi.
in one pc i mined at the same time at 2 programs - 1060 card in claymors and 1070 in ewbf
in awesome miner i see only miner 1060 and 1070 not find
how i may tune in awesome 2 miner for 1 pc?
tnx.
I assume you have a setup with two Managed Miners, one for Claymore and one for EWBF? Do you see both your GPUs on the System tab when you select any of these miners? Then you can try to map the GPU information to each Managed Miner: http://www.awesomeminer.com/help/gpumapping.aspx |
|
|
|
That page contains a few coins, but from Awesome Miner's point of view, MPH is not a source for single coin information because WhatToMine is more complete in terms of coins and information. But for someone who is only mining with Mining Pool Hub only, then only those coins matter. And it could be argued that MPH rating for BTC/GH/Day for it's own coin pools will be more accurate than WTM because it can account for it's own transaction fees and because it will be based on it's own actual performance. It might be a variantion of one or a few percent, but even if MPH calculates given their previous block finding luck in mind, that's never an indication of current or future profits anyway. I do understand your point here, but for the moment, WhatToMine will be the main source for coin information. If more people requires this feature, I will of course been considered for future development. |
|
|
|
I just updated to the new version and it will not open. Anyone else having this issue?
I would suggest everyone NOT to update. Tried restarting system with no luck. Tried installing it again with no luck. I hope it something with my machine only. Could you please send me your log file: %localappdata%\AwesomeMiner\AwesomeMiner.log To reinstall, you probably need to uninstall the software from Control Panel, Programs and Features, first. |
|
|
|
Version 3.2.4 (Development preview of 3.3 - Not for production use)I'm not attaching the full change log. This release mainly includes: - Correction to the problem where Signatum coin not getting correct statistics - Managed Profit Miners can be configured with environment settings like Managed Miners, where window mode and processor settings can be defined. Important: The Remote Agent must also be upgraded. Development Previews can be enabled from the Options dialog, General section. Then Menu -> Check for updates. If you need access to the MSI files for manual installation: http://www.awesomeminer.com/download/setupdev/AwesomeMiner.msihttp://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteAgent.msi
|
|
|
|
Maybe you messed this one: I am proposing some enhancements to AM: [...] - Option to start miner sw as window (as is) OR minimized
[...] [/list] It is very annoying when the new miner window steals the focus ... whats even worse: Hitting the space bar and the very wrong moment will actually pause the intrusive miner  So please start miners hidden... TIA!  Starting hidden and starting minimized are different, and in fact it's not easy to get a miner console application starting minimized (it can be forced minimized after starting). The feature to run the miner console application hidden is already supported by the configuration in the Managed Miners. I can add the same settings to the Managed Profit Miners as well. |
|
|
|
Hello and thanks for new version. Signatum don't work for me. I have the new coin but it was always "0.00 CHF". In coins section, I have nothing in blocks, network hash rate, difficulty and Exchange rate. I have add http://whattomine.com/coins/191.json on the new statistic section, but it's the same. The only thing is to change manualy. Thanks. Yes, can't make it work. Thanks for the feedback - I've identified the problem. I will make a new release later today with a correction and a few other updates. |
|
|
|
Also, as you probably noticed in their license information, I'm explicitly forbidden to automatically download Excavator from Awesome Miner. So the user experience will not be as good when I move to v1.2.
Well, not really. click through license limitations are really not enforceable. But in any case, you can get around it by embedding a web browser window inside AM that will display the "releases" page or whatever. You could even have AM parse the returned page and discard all parts of the page except the link (they can't enforce a copyright on or enforce a process on the download mechanism of GitHub). The AM user must manually click the download link which makes them responsible for the download, not you. But at the user click AM can intercept the link activation (since it is an owned browser window) and make sure the download goes to a know place where AM can extract it to the right folder and configure it for the end user. I'm not a lawyer, but I've had over 20 years of experience in IP (both patents and copyrights) and have several device patents (no software patents) to my name. The browser is a part of Windows. There is no fundamental difference, from a license standpoint, if your application launches the browser window as an embedded owned browser window and intercepts and process the users explicit request within the context of the user's desire to add it as a managed program to your program. It's obvious that NiceHash wants their program to really be usable only within their domain, but that's an unfair restriction (and unfair business practice) on a software that is otherwise freely available for separate use. Of course Excavator using GitHub to host their closed-source application is a questionable use of GitHub in the first place. They just don't want to pay for server bandwidth to host their own proprietary program distribution. Then they use the source control part of GitHub to make a sort of documentation site; again, because they don't want to pay for their own server. There may or may not be anything against the terms of service of GitHub, but it seems at least dishonest and an abuse of what GitHub is meant to be to me. Thanks for the insightful feedback on this. I have been talking to the responsible person at Nicehash about this before, and from their point of view, I'm not allowed to do automatic download of Excavator v1.2. And I don't want to make any enemies so I will have to agree to that. As you point out, there are ways of making it easier for the user to make this setup anyway, but right now this has a little lower priority because of the extra work it would require to make something that still gives poor user experience. Right now it's not only the Awesome Miner main application that makes the downloads, but also each Remote Agent. |
|
|
|
Storx is correct here. Awesome Miner is only using WhatToMine for individual coin profit. When mining on Nicehash, zpool or Mining Pool Hub, Awesome Miner uses the API's of these services to figure out the profitability, as these services doesn't mine a fixed coin all the time. From the "outside", it's very difficult to know the profit of mining on these three pools without asking them (via API), so that's what Awesome Miner do.
One small correction, Mining Pool Hub does have coin mining ports in addition to their own auto switching algo mining ports. So Mining Pool Hub should be able to work with fixed coin profit switching. The Multi Pool Miner package has the feature of coin mining on MPH but I haven't tried it. For port range 17000-17099, Awesome Miner considers Mining Pool Hub as a multi-coin pool that you configure as an Online Service. For the other single-coin pools by Mining Pool Hub, they are just single coin and then Awesome Miner will be using the coin sources like WhatToMine. That page contains a few coins, but from Awesome Miner's point of view, MPH is not a source for single coin information because WhatToMine is more complete in terms of coins and information. |
|
|
|
Also a small issue, but using the 'Save hashrate...' shortcut on a miner does not seem to save the hashrate to the Algorithms page when you click 'OK' - I think this may only happen when you are using Managed Profit Switching (probably because of Unspecified coins) , as I remember it working before I started using that feature (using just Managed Miner)
Also one last request for awhile (everything else is... you know... awesome) - can you include profit on the web interface instead of just revenue?
I will look into this. For the web page it's a bit limited in terms of space, especially if you run on a mobile device. For the desktop web it will probably fit. |
|
|
|
Excavator v1.2 is not at all compatible with Excavator v1.1 included in Awesome Miner. They completely redesigned both the API and command line options between v1.1 and v1.2, so they are not compatible at all.
At some point I will add support for Excavator v1.2, once they keep the API more stable. There will be quite an implementation effort to support the new v1.2, and so far I don't think this miner has been so popular. Also, as you probably noticed in their license information, I'm explicitly forbidden to automatically download Excavator from Awesome Miner. So the user experience will not be as good when I move to v1.2.
Agree. I am more confused about the 'show/no-show' of custom software in profit profiles... similar issue to CPU mining with profit switching in AM dev 3.2.2)
Q: How do I set up CPU mining with profit switching in AM?
All predefined mining software (incl. CPU miner in latest v3.2.3) and all Managed Software with Full Compatibility will be listed as available for the profit switcher in the Profit Profiles. Excavator v1.2 cannot be used at the moment, because it's not yet supported by Awesome Miner |
|
|
|
I really begin to like all the features of AM - great stuff! A couple of things... Suggestion UI change1. I suggest you add 'Main' -> 'Miners' -> 'Summary' -> 'View details...' function to the right-click context menu of the miner itself. 2. In 'View details' -> 'Profit switching' add right-click option 'Mine this...' (will switch mining to the selected algo) Finding when trying to include Excavator v1.2.11a as custom minerThe miner is hosted here: https://github.com/nicehash/excavator (note the special copyright) 1. Create 'User defined mining software' -> 'Compatibility mode=API only' / 'Compatible Software=Excavator (BETA)' / 'API Port=3456', tick some algos (ethereum, pascal) 2. Try to include it as Mining software in the 'Profit switshing profile properties'. It is not here  3. Change 'User defined mining software' -> 'Compatibility mode= Command line and API'4. Go to the 'Profit swiching profile properties'. Now it is available . Configure custom path to binaries 5. Deselect all other miners 6. Try to mine with it - no success. Result: =========================== www.nicehash.com =========================
Excavator v1.2.11a GPU Miner for NiceHash.
Copyright (C) 2017 NiceHash. All rights reserved.
Developed by djeZo, zawawa and dropky with help and contributions from
pallas, Vorksholk, bitbandi, ocminer, Genoil
=========================== www.nicehash.com =========================
Build time: 2017-07-28 11:55:16
Build number: 247
Provided startup commandline:
"C:\Program Files\CryptoMining\Miners\excavator_v1.2.11a_Win64\excavator.exe" -a -s europe.ethash-hub.miningpoolhub.com:17020 -u UselessGuru.Awesome:x -ca -p 4028
[23:39:43][0x00000d48][info] Log started
[23:39:44][0x00000d48][error] opencl | Failed to get ADL function pointers.
[23:39:44][0x00000d48][error] opencl | Failed to initialize the AMD Display Library (ADL).
[23:39:44][0x00000d48][info] core | Found CUDA device: GeForce GTX 1080 Ti
[23:39:44][0x00000d48][info] api | Listening on 127.0.0.1:3456
[23:39:44][0x00000d48][error] core | Failed to open command file: -p
[23:39:44][0x00000d48][info] core | Initialized!7. Change 'User defined mining software' -> 'Compatibility mode= API only'8. Try to mine with it. It connects to the miner but nothing happens.  now here comes the tricky part... 9. Try to add some custom command line parameters in 'Profit switching profile properties'. Miner is not visible anymore, even though the 'Profit profiles' miner counter stays @ '1' 10. Delete the 'User defined mining software' from step one 11. Go back to 'Profit profiles'. Miner counter stays @ '1' 12. Restore XML Backup  Excavator v1.2 is not at all compatible with Excavator v1.1 included in Awesome Miner. They completely redesigned both the API and command line options between v1.1 and v1.2, so they are not compatible at all. At some point I will add support for Excavator v1.2, once they keep the API more stable. There will be quite an implementation effort to support the new v1.2, and so far I don't think this miner has been so popular. Also, as you probably noticed in their license information, I'm explicitly forbidden to automatically download Excavator from Awesome Miner. So the user experience will not be as good when I move to v1.2. |
|
|
|
Version 3.2.3 (Development preview of 3.3 - Not for production use)This update is smaller compared to the previous ones, but also includes a number of minor improvements and corrections not listed in detail below. - More flexible algorithm configuration. New algorithms can be defined by user and configured for each mining software. - More flexible Online Service and profit switching configuration - Managed Software can be added and used by both Managed Miners and by the Managed Profit Switcher - Profit switching improvements, including configuration to disable individual algorithms per pool and separate dual mining hashrates - Web interface includes secondary hashrate if available, coin information in smart phone mode and corrections to notification display in multi-user environments - New HTTP API's: Perform operations on a single notification. Includes Group Id information for miners. Get list of Managed Templates and apply templates to a miner.- Custom e-mail address can be set for a notification action, to override the global e-mail address to send notifications to - The coins listed with exchange rate in the statusbar can be customized - Moved e-mail server configuration to a separate section in the Options dialog - New algorithms and coins added- Add user defined WhatToMine coins not listed in the main API- Antminer R1-LTC hashrate correction - Display Claymore miner invalid shares as HW errors - Claymore Ethereum Miner 9.8 - Ccminer 2.1 replaces older Ccminer SP-mod - Corrections to SMTP library to support Office 365 accounts - Correction of Block Explorer request for zcash for the Balance feature - General improvements and corrections Important: The Remote Agent must also be upgraded. Development Previews can be enabled from the Options dialog, General section. Then Menu -> Check for updates. If you need access to the MSI files for manual installation: http://www.awesomeminer.com/download/setupdev/AwesomeMiner.msihttp://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteAgent.msiNew guide on the web site about Managed Software: http://www.awesomeminer.com/help/managedsoftware.aspx
|
|
|
|
Is it possible for me to access Awesome Miner (read and/or write) from another C# application? I was building a few tools in visual studio and was hoping to exchange some data to/from Awesome Miner but am at a loss on how to do it. I realized that the integrated scripting is locked beyond another version but even with that it probably will not be able to do what I am wanting, so I would love to get it integrated into my projects somehow..
The way of getting information for an external application is to use the REST API: http://www.awesomeminer.com/help/api.aspx |
|
|
|
It's worth mentioning that in the dev build, ccminer alexis has the groestl algorithm enabled by default but it does not support groestl - ccminer 2.1 does
Also there is no SkunkHash minier included. For best hash rates on a 1080ti I recommend ccminerskunk3 (see link below). Furthermore in 'Options' -> Managed Software' -> 'CcMiner 2.1' (or similar) -> 'Edit...' there is no 'Default command line argument'. This will lead to: Is it possible to add skunk algo in the software to support SIGT coin?
The latest dev version 3.2.2 supports skunkhash/SIGT out of the box. The miner sw can be found here: https://github.com/nemosminer/ccminer-skunk-jha/releases/tag/ccminerskunk3In 'Mining software configuration' -> 'Command line parameters to mining software' you need to add '-a skunk --intensity=[n]' (n being a number from 1-31) I know this is a bit complicated to setup the command line in this scenario right now, but my plan is to let you define the mapping that Skunkhash algorithm should be launch with "skunk" command line argument as part of the user defined Managed Software. Similar concept already exists for the predefined Managed Software. Due to some other priorities, it will take a couple of more days before I will be able to make that implementation change. |
|
|
|
It's worth mentioning that in the dev build, ccminer alexis has the groestl algorithm enabled by default but it does not support groestl - ccminer 2.1 does
Thanks for finding that, I will remove it. |
|
|
|
Hello everyone It's possible to have automatically the properties of Signatum (SIGT) coin ? It exist on https://whattomine.com/coins/191-sigt-skunkhash but we need to enter manualy and the price and difficulty of the market is still moving. Thanks. Yes, I've just implemented that. In the next development release you will be able to add the JSON urls for any of the WhatToMine coins, in the Options dialog Statistics section. In addition to that, I've added Signatum by default for WhatToMine. I was planning to wait until WhatToMine API changes to include Signatum and more in the standard API responses, but I do see the need of this feature right now. It was suggested by a few other users last week as well. |
|
|
|
Using awesome minor to monitor/manage multiple Claymore v9.7 rigs. Noticed that the normal Claymore monitor tool Android app stopped working--apparently Awesome miner disables or somehow changes the default Claymore 3333 port so these Claymore-specific managers/monitors (outside of Awesome Miner) no longer work. As soon as I add -mport 3333 into command line for EthMiner64/Claymore, Awesome Miner stop working/seeing the systems and the normal claymore utilities work again.
Any way to still allow normal Claymore monitor tools to use 3333 (or another port) while Awesome Minor still working as well? I assume Awesome Miner is doing something to the IP ports when it executes the Claymore miner executable....
Awesome Miner is controling the ports used by the mining software, in order to support the scenario where you run multiple instances of them on a single computer. If you click the View Details button, you will be able to see which port Awesome Miner assigned to a specific miner. Then you should be able to enter this port in you other monitoring software. Right now it's not possible to instruct Awesome Miner to use a specific port. |
|
|
|
|
Show Posts
