Awesome Miner 3.0 - Development preview release (v2.9)Awesome Miner version 2.9.X is a development preview of version 3.0. Version 3.0 is expected to be finalized and released in May 2017, but you can try many of the features already today. • Profitability Switching ○ Easy to use profitability switching feature that supports switching between all popular mining software and algorithms. Just enter your Bitcoin address and get started. ○ Multiple profit switching profiles to manage profitability switching across a wide range of miner configurations ○ Supports NiceHash, Zpool and any custom pool where the coin being mined is known • GPU Mining ○ Large scale GPU overclocking and configuration settings for remote systems without dependency on mining software having to run ○ Display of GPU and CPU monitoring (temperature, clock, load and more) from remote systems without mining software having to run ○ Mining software versions for automatic download can be updated without upgrading to a new version of Awesome Miner ○ Scan for Awesome Miner Remote Agent installations on the network and configure all of them for standard mining or profit switching ○ EWBF Zcash miner supported for nVidia GPU ○ X11Gost algorithm supported • ASIC Mining ○ Show ping information for disconnected External Miners ○ Set default pools for Antminer ○ Antminer L3+ supported • Configuration ○ More display currencies supported. In addition to USD, an additional 11 currencies are now included. ○ Usability improvements in the configuration dialogs and wizard • Rules ○ Rules can be applied to a miner group in addition to multiple miners ○ New rule to trigger based on pool URL • Many general improvements Instructions how to use the new profit switching feature: http://www.awesomeminer.com/help/profitswitching.aspxInformation on upgrading: • Awesome Profit Switching was previously defined as a rule. Awesome Profit Switching is now enabled per External Miner. The general settings for Awesome Profit Switching are located in the Options dialog, Profit Switching section. • Algorithm hashrate settings was previously defined as a factor with relative numbers between algorithms. This has been replaced by a concept where hashrate is specified. In addition, multiple Profit Switching Profiles can be defined to support different kinds of devices. • Downgrade is not possible. After upgrading to Awesome Miner 2.9 or 3.0, it's not possible to downgrade to 2.4 without all settings being lost. Do not install version 2.4 after running version 2.9 or 3.0. • If you need direct access to the MSI-files for the development preview, use the following links: ○ http://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi ○ http://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msiHow to install?To get access to development versions, go to the Options dialog and enable "Check for development versions". Then you can go to the Menu and select "Check for updates". Please try out the new features and give feedback. There will be a few more features added before the final 3.0 release. (Updated with 2.9.4 features)
|
|
|
|
Hello
I tried to swap from nicehash miner to Awesom miner but i think i dont get it?
It always says
POOL: -epool stratum+tcp://us.clevermining.com:3333 -u 184J94iB1kanCFjyNs2Pm45Tgr83UiZ1Ey -p 123, PSW: 123, WORKER: test, ESM: 0, ALLPOOLS: 1
Hi, Have you defined a Pool in Awesome Miner, where you specified the Pool URL, username and password according to above? When you create a Managed Miner, the idea is to specify the pool you created and generally no command line parameters should be manually added to the Managed Miner. Also isn't us.clevermining.com:3333 a Scrypt pool? The Claymore Ethereum mining software is intended to mine Ethereum, not Scrypt. Just to make sure I understand your request - is it Ethereum you want to mine? There is also a guide on the web site how to setup Ethereum mining: http://www.awesomeminer.com/guide/ethereum.aspx |
|
|
|
good afternoon
I ask help
Already the whole head broke how to do ((
I have a farm on gtx1060
Take
Ccminer-Alex-v1-x32-sib -a lbry -i 24 -o stratum + tcp: //lbc.coinmine.pl: 8787 -u tur ********. Gtx1060_1 -p x
I can not how to set up a local program that would have earned
What and how tell me step by step
Hi, You should use the concept of Managed Miner: 1) Install Awesome Miner Remote Agent on all computers where you want to run ccminer 2) Install Awesome Miner on your main computer 3) Add your pool in Awesome Miner 4) Define all Remote Agents as Managed Hosts in Awesome Miner 5) Add a Managed Miner for each Managed Host. 6 a) Either you configure every Managed Miner with the settings you want (like command line, pool) and so on OR... 6 b) Define a single Managed Template where you define these settings and then apply to all your Managed Miners (apply option available in toolbar: Main -> Template...). 7) Start the Managed Miners The above is the general concept, please get back to me with any follow up questions when you started looking into the above. |
|
|
|
I would like to see Awesome Miner support the Ebit E9 miner. I recently picked 5 of these up and would like to be able to access them through Awesome Miner.
Awesome Miner supports all miners that's based on standard software like cgminer. As toptek asked above, did you try to add them in Awesome Miner as External Miners? Yes. I have them hosted remotely, along with some other bitmain gear. The bitmain gear all showed up in awesome miner after I added it. But not the E9's. IT just reads "Disconnected". Though I can access it fine through IE. I tried both CGminer and BFGminer settings, as I don't know what software powers it. All I can find is a system software version number of "soft_v1.0.6.2" Can you select the E9 miner in the main window of Awesome Miner, and generate an API report from the toolbar: Tools->API Report. Please send me that report and I will take a look. In the web interface for the E9 miner, do you see an option to enable the cgminer API for external applications to connect? |
|
|
|
but are you meaning who the newest 741 is working too???
741 it's the latest canaan.io product!!
OK. I know that Avalon 721 worked out of the box, so it should work just fine with the new one as well. If not, just get back to me and I will add support for it. |
|
|
|
For dev. i'm interested to buy new avalon 741.
Awesome miner support it??
Avalon 7 miners are supported. I've received reports from users that these miners works fine with Awesome Miner. |
|
|
|
I would like to see Awesome Miner support the Ebit E9 miner. I recently picked 5 of these up and would like to be able to access them through Awesome Miner.
Awesome Miner supports all miners that's based on standard software like cgminer. As toptek asked above, did you try to add them in Awesome Miner as External Miners? |
|
|
|
|
Awesome Miner version 2.4.2:
- Improvements to the rule action for SSH, with an option to configure wait time between sending commands to multiple hosts
- Corrections to rule actions with many SSH connections
|
|
|
|
Awesome Miner verison 2.4.1 has been released:
- Added rule trigger for Ping timeout
- Display miner API response time on summary tab
- Claymore's Zcash Miner 12.4 and Claymore's Ethereum Miner 8.1
- Corrections to Managed Template implementation and connection stability
would it possible to get optiminer zec put into the list it has a monitoring port that can be set at 3333 just like claymore would be nice if this could be done!!! keep up the good work! love this program Have you verified if the API is identical? Can you try to add an External Miner that is pointing to this port, and specify the type as Claymore's Zcash Miner? the api is different. this is optiminer {
"iteration_rate" : {
"GPU0" : {
"3600s" : 135.39444444444445,
"5s" : 136,
"60s" : 135.75
},
"GPU1" : {
"3600s" : 138.97222222222223,
"5s" : 138,
"60s" : 138.91666666666666
},
"GPU2" : {
"3600s" : 140.15416666666667,
"5s" : 140,
"60s" : 139.91666666666666
},
"GPU3" : {
"3600s" : 139.47083333333333,
"5s" : 140,
"60s" : 139.5
},
"GPU4" : {
"3600s" : 139.31666666666666,
"5s" : 138,
"60s" : 139.33333333333334
},
"Total" : {
"3600s" : 693.30972222222226,
"5s" : 695,
"60s" : 693.25
}
},
"os" : "linux",
"share" : {
"accepted" : 11591,
"rejected" : 29
},
"solution_rate" : {
"GPU0" : {
"3600s" : 254.52416666666667,
"5s" : 258.39999999999998,
"60s" : 256.81666666666666
},
"GPU1" : {
"3600s" : 260.54722222222222,
"5s" : 265.19999999999999,
"60s" : 263.78333333333336
},
"GPU2" : {
"3600s" : 263.30333333333334,
"5s" : 278.80000000000001,
"60s" : 264.5
},
"GPU3" : {
"3600s" : 261.95833333333331,
"5s" : 274.60000000000002,
"60s" : 265.36666666666667
},
"GPU4" : {
"3600s" : 260.98305555555555,
"5s" : 260,
"60s" : 260.31666666666666
},
"Total" : {
"3600s" : 1301.3116666666667,
"5s" : 1344.2,
"60s" : 1310.1666666666667
}
},
"stratum" : {
"connected" : true,
"connection_failures" : 0,
"host" : "equihash.usa.nicehash.com",
"port" : 3357,
"target" : "0007878787800000000000000000000000000000000000000000000000000000"
},
"uptime" : 78002,
"version" : "1.7.0"
}this is claymore {"result": ["8.1 - ETH", "2353", "128510;7550;3", "26062;26119;25445;25478;25404", "0;0;0", "off;off;off;off;off", "66;40;66;40;69;47;69;47;68;55", "daggerhashimoto.usa.nicehash.com:3353", "1707;0;0;0"]}im tried what you asked and have no luck its no big deal if it isnt possible Thanks for providing the information. The only similarity with the Claymore API was that port 3333 was used. Otherwise it's a different API format that currently isn't supported by Awesome Miner. If it turns out that optiminer is popular, this might get supported in the future. |
|
|
|
Awesome Miner verison 2.4.1 has been released:
- Added rule trigger for Ping timeout
- Display miner API response time on summary tab
- Claymore's Zcash Miner 12.4 and Claymore's Ethereum Miner 8.1
- Corrections to Managed Template implementation and connection stability
would it possible to get optiminer zec put into the list it has a monitoring port that can be set at 3333 just like claymore would be nice if this could be done!!! keep up the good work! love this program Have you verified if the API is identical? Can you try to add an External Miner that is pointing to this port, and specify the type as Claymore's Zcash Miner? |
|
|
|
Thanks for the reply.
I know the ip address, however the program doesn't seem to find them.
It shows them as offline
Do you know if the API is enabled on the devices, to allow external applications like Awesome Miner to connect? It looks like there are some steps required according to this thread: https://bitcointalk.org/index.php?topic=810891.msg9083903#msg9083903 |
|
|
|
Hello,
is there a guide or could anyone help me to add spoondolies miners to awesome miner?
Thanks
Hi, If it's only a one or very few of them and you already know their IP addresses, you can use the Add Miner Wizard according to this guide to add them: http://www.awesomeminer.com/help/externalwizard.aspxIf there are many, I recommend the same Wizard, but instead selecting "External Miner - Network Scan", where Awesome Miner will try to find all the miners on the network and add them. |
|
|
|
|
Awesome Miner verison 2.4.1 has been released:
- Added rule trigger for Ping timeout
- Display miner API response time on summary tab
- Claymore's Zcash Miner 12.4 and Claymore's Ethereum Miner 8.1
- Corrections to Managed Template implementation and connection stability
|
|
|
|
patrike did you get my logs just making sure ... I'm still having some issue using 2.3 on a remote PC while using 2.4 on the main PC or even using 2.4 on the main rig with 2.4 remote but was fine using 2.3.1 on all rigs ...I would go back to 2.3.1 on all Rigs but i only saved the remote version for 2.3.1 ...
Please upgrade to version 2.4.1 and let's continue the discussion about the log files by mail. |
|
|
|
if i setup to watch on external miners working on Claymore Dual miner, how i can setup to see day and month profit on Dashboard ?
in miner settings i chose Dual miner
What kind of pool/coin is it? Pools is coinotron for ETH + coinmine.pl for DCR You need to define a coin (specifying Ethereum) for the pool in Awesome Miner. If you select a miner, and then look at the Pools tab, you should be able to define a Coin for the pool. If the pool isn't defined in Awesome Miner, you may have to import it first. |
|
|
|
if i setup to watch on external miners working on Claymore Dual miner, how i can setup to see day and month profit on Dashboard ?
in miner settings i chose Dual miner
What kind of pool/coin is it? |
|
|
|
I havent tried the API access for S9. I gave it a try on one miner to test it and now the miner is showing Disconnected in the program. The miner is working good on the pool. Updated to 2.4
I tried different combinaisons of rules, it always says OK in the list but I can't get the miner reconnected to the program.
W:192.168.2.160
W:192.168.2.160,W:127.0.0.1
W:127.0.0.1/32
w:192.168.2.160
etc
What I'm doing wrong?
The second configuration looks best, as long as 192.168.2.160 is the IP of your Windows computer. Is that the case? Have you tried the setting in Awesome Miner to allow access to any computer, just to see if that option is working better? Thanks for the reply. I tought it was the miner IP and not the computer IP. It works now.  Does it works with R4 and T9 ? Yes, Awesome Miner works fine with both Antminer R4 and T9. |
|
|
|
what email the log is to big to post in a PM to many character's and i can't figure out how to send attachments on the forums or if it is even Poss .. even went to Awesome miners site looking for a support email , I 'm sure I missed it if there is one ....
Please send the log files to info[at]awesomeminer.com Thanks! |
|
|
|
I might be doing some thing wrong unless 2.4 broke something using it remotely it updated remotely to 2.4 with no issue but it won't run on any Rigs remotely all it says is starting in blue letters and sets there, if I look at the remote rig with Remote Desktop Connection nothing is hashing, so i tested it more, i deleted all the Awesome miner folder's on the all the remote rigs then uninstalled/reinstalled it on each remote rig manually then reinstalled AM on the main Rig/PC at 2.4 with all new settings and pools it still won't work remotely with 2.4, so i have a copy of 2.3 saved and that works on the remote rig/pc ...with 2.4 on the main Rig/pc.
Could you please send me the log file (preferrably both from Awesome Miner and for the Remote Agent) by mail, and I will have a look. |
|
|
|
I havent tried the API access for S9. I gave it a try on one miner to test it and now the miner is showing Disconnected in the program. The miner is working good on the pool. Updated to 2.4
I tried different combinaisons of rules, it always says OK in the list but I can't get the miner reconnected to the program.
W:192.168.2.160
W:192.168.2.160,W:127.0.0.1
W:127.0.0.1/32
w:192.168.2.160
etc
What I'm doing wrong?
The second configuration looks best, as long as 192.168.2.160 is the IP of your Windows computer. Is that the case? Have you tried the setting in Awesome Miner to allow access to any computer, just to see if that option is working better? |
|
|
|
|
Show Posts
