|
Snygg tjänst och intressant gamification koncept.
|
|
|
|
The next release will show hashrate of both coins in the miner list when using Claymore's Dual Ethereum miner.  If anyone can think of a better name than "Secondary:", please let me know. |
|
|
|
Its odd one of the 3 pools supported is Zpool and it still does not have Blake2s. My dashboard is not correct because of this.
Need Blake2S support
Can't get advanced API with my L3+
Half the coins are not loading
Blake2s can be added in next release. I already noticed your other reply above that the L3+ issues was resolved. Was there any other issues on the dashboard than Blake2s missing? Skien is not showing a price so there is not profit posted. There are no Skein coins on whattomine or coinwarz, so the only source of information is zpool. Zpool Skein statistics and profit switcher support is implemented, but not yet released. |
|
|
|
For those using the Profit Switching feature in Awesome Miner, correct me if I'm wrong, but should we only use pools that payout via PPS (versus PPLNS) when doing profit-switching?
From what I gather, PPLNS rewards you in the longer-term (how long I don't know.. is it days, weeks?), and that if you are mining on a PPLNS pool and you stop mining before a block is found you will gain much less payout. It seems for shorter bursts of mining on a pool PPS is better.
Can anyone provide some guidance on this please? It seems most pools gave a PPLNS system only. Dwarfpool has a PPS payout . For those of your using profit switching what you are using and how often do you have it configured to switch (I think we can adjust that time period so then it might make sense to increase the time it checks for more profitable coins.. but what is an appropriate time in the case of PPLNS?)
Awesome Miner doesn't take PPLNS / PPS into consideration for the switching feature. The default switching time is 30 minutes, simply because changing too often can give lower profitability. This setting can of course be changed, but I don't have an answer on what is the most optimal value to play well with the PPLNS. Maybe someone else here in the thread have more experience in this area? |
|
|
|
Hello, i dont want to pollute your thread with noob question  Finally i found My request to accept sgminer.exe on my firewall didnt work ---> Noob <--- i m very excited to used your log and make hours of seach to have the betest parameters ^^ PS/ do you have a link explain all paramaters i can do and the incidence of them or maybe a link of conf made by others miners PS/ do you have the command to stop miner if GPU is under 73° or up fan speed thanks Hi, I don't have all these parameters for each mining software documented. I think you have to take a look at the readme-files for each mining software to figure out the details. I know this can be a bit complex, but unfortunately there are so many different mining software out there, and they are being developed all the time. You can use the Rules (Options dialog, Rules section) to define that if GPU temperature is above a defined level, the miner should be stopped. More about rules: http://www.awesomeminer.com/help/rules.aspxThanks mate Where i can config priority of pool (0 1 2 3 ..) ? AM can create config and bat file for solo mining ? or i must create manually sry for noob question You can create a Pool Group (Options dialog, Pools, change to tab: Pool Groups) where you add some pools and define priorities. I don't know how to make a setup for solo mining - you need to find that information somewhere else. |
|
|
|
Well I just purchased the standard edition for my 4 miners mining Zcash, and..... NO ZCASH profile like your website showed. It just shows a yellow circle with EQH in it and "Unspec. Equihash. NO Zcash? Really? Why do you show it on your website? It will not give me the Per Day or Per Month calculations as "unspecified".....
Hi, Are you using Managed Miners, where you define the Pool in Awesome Miner? If the pool is a Zcash pool, you should use the Pool Properties in Awesome Miner to set the Coin to Zcash. If Awesome Miner knows it's for example Zcash, it will show the profit information based on this. If you mine Equihash on either Nicehash or Zpool, it will be "Unspecified Equihash". There is no way to know if it's Zcash in these scenarios. However, Awesome Miner do know the profitability of the Equihash algorithm at both Nicehash and Zpool. Then it makes sense to show the profit information even if the exact coin is known. Also let me know which mining software you are using. For EWBF it wasn't until the very latest version 0.3.4 that it supported to report pool and worker information correctly. |
|
|
|
Thank you. I got it. I was putting in the Privileged IP of the miner, not which computers I wanted to give Write access. I did not read the clear description of what I was suppose to input. Thanks for the feedback, I will try to make the description better. |
|
|
|
Hey patrike
I haven't posted in while because no issue but I have one.
I'll try explain as best i can ...
I have a 5 cards 4 are AMD cards and one is a NV GTX 1060 card and I'm mining Zec, i have to use CM 12.5 for the AMD cards and for the GTX 1060 i have to use EWBF's Zcash cuda miner.
The Problem is If I use the Map System Monitoring it shows the GTX 1060 as a AMD card on device 0 which the AMD card is on device 0, is there a way to make AWESOME miner Show the GTX 1060 card as a GTX 1060 ..i have to load it by it self because CM 12.5 Zec miner doesn't support NV cards ...and EWBF shows it as Device 0 when it's device 4 and sense it does awesome lists it as Device 0 which makes it think the gtx card is a AMD card ... but if i look at the list under the Maped system it shows the NV card as device 4 and as a GTX 1060 ... i think i explained right ...
Hi, Map to System Monitoring should in your case show all 5 cards. Then you need to use the up/down buttons to define the order of them. On your Claymore ZEC miner for AMD, you should first of all move down the nVidia card to the last position - then it will not be used in the GPU tab with your 4 active cards. On your EWBF ZEC miner for nVidia, you should move the nVidia card to the top |
|
|
|
Yes you can! Pushover allows you to generate unique email addresses in situations like this where direct integration is not supported. I have it working on my setup, its great.
I am doing same thing but you get a little more customization with native support. Pushover is not supported. What will be supported later on is SMS messages. |
|
|
|
Its odd one of the 3 pools supported is Zpool and it still does not have Blake2s. My dashboard is not correct because of this.
Need Blake2S support
Can't get advanced API with my L3+
Half the coins are not loading
Blake2s can be added in next release. I already noticed your other reply above that the L3+ issues was resolved. Was there any other issues on the dashboard than Blake2s missing? |
|
|
|
Hello, i dont want to pollute your thread with noob question Finally i found My request to accept sgminer.exe on my firewall didnt work ---> Noob <--- i m very excited to used your log and make hours of seach to have the betest parameters ^^ PS/ do you have a link explain all paramaters i can do and the incidence of them or maybe a link of conf made by others miners PS/ do you have the command to stop miner if GPU is under 73° or up fan speed thanks Hi, I don't have all these parameters for each mining software documented. I think you have to take a look at the readme-files for each mining software to figure out the details. I know this can be a bit complex, but unfortunately there are so many different mining software out there, and they are being developed all the time. You can use the Rules (Options dialog, Rules section) to define that if GPU temperature is above a defined level, the miner should be stopped. More about rules: http://www.awesomeminer.com/help/rules.aspx |
|
|
|
SOMEBODY PLEASE write the correct script/code for miner reset when a GPU hangs, 'thread exit code 46 - or whichever".
It happens to me during the night and I lose hours of mining because of that,
I tried all suggestions from this topic, but nothing worked.
And send me your btc address, I'll give out a reward to successful solution.
It's popular to use Awesome Miner to detect and do something about these kind of issues, for example automatic restart or reboot. You can define rules based on hashrate, if mining process isn't working and so on. Awesome Miner is totally free for up to two miners, so please give it a try. |
|
|
|
hi
I ve a good internet conection
I have select local miner -i have sgminer + GPU..............i m right ? or its an external ?
thanks for help
Hi, Can you please be more specific about what you want to do, and I will be able to guide you better. Awesome Miner works with Sgminer and GPU mining in general. For this you use the Managed Miner concept where you let Awesome Miner be in full control of the mining operation: http://www.awesomeminer.com/help/managedwizard.aspxhttp://www.awesomeminer.com/help/managedminer.aspx |
|
|
|
Hi, I'm not getting any of the coins to update their exchange rate, in the log I found numerous error messages like this: System.Net.WebException: The request was aborted: Could not create SSL/TLS secure channel. Is anyone else having this issue? I can open these websites just fine in the web browser. Like coinbase or bitstamp, not sure why the program can't. Can you manually access the URL's that Awesome Miner trying to connect to? If you try to open the following in your web browser - does it give valid information back? https://www.bitstamp.net/api/ticker/https://api.coinbase.com/v2/prices/spothttp://www.whattomine.com/coins.jsonIf that is working from your web browser, but not from Awesome Miner, it sounds like you have some kind of security software, web proxy or firewall that is preventing Awesome Miner from making these connections. |
|
|
|
I have noticed AM seems to convey information through the net so if your net connection goes down, all the rigs disconnect (although this might be a form of DRM). While it makes sense you wouldn't be mining offline (except for some really weird coins), you still need to manage your rigs in event of a internet disconnect, such as shutting down miners that don't stop mining when there is nothing to work on.
If your connection is sporadic enough it could be causing the rigs to show up offline. If this is DRM you could just make all the options available except starting the miner.
It's only when you enter your registration code the first time you are required to have an Internet connection. After that, the Internet connection is only used to get coin/profit statistics and information about new versions. There is no need for having an Internet connection for the monitoring to work - but as you point out, the Internet connection is of course important for the the actual mining software to connect to the pool. In your scenario, did you verify that it was only the Internet connection itself that went down, and no other network issues either on or between Awesome Miner and the Remote Agent application? From an Awesome Miner point of view, this is just a simple TCP/IP connection, so as long as you can establish TCP/IP connections between the computers, it shouldn't be a problem. Did you verify the connectivity with ping only, or did you verify if other applications on the computer running Awesome Miner where able to make connections to a remote computer where the Remote Agent is running? |
|
|
|
Anyone else having issues right now?
Shows 2 of my rigs Disconnected in Awesome Miner, yet they are hashing away just fine.
Can ping my rig that shows connected, can't ping the rigs that show disconnected.
Maybe reboot router/hub?
Well that screwed everything, had to go back and reset every damn rig in Awesome Miner. Lol. Guess I need to set static local IP's on each rig. I'm still not sure if I fully understand the scenario here. Was the problem related to that you had miners that had dynamic IP, and the IP changed all of a sudden? |
|
|
|
Anyone else having issues right now?
Shows 2 of my rigs Disconnected in Awesome Miner, yet they are hashing away just fine.
Can ping my rig that shows connected, can't ping the rigs that show disconnected.
Maybe reboot router/hub?
Can you give some more details. ASIC or GPU mining? Which mining software? Did it just stop working all of a sudden? Can you please select a miner and click the toolbar button: Tools -> API Report. This can give an indication about any problems. |
|
|
|
Hello,
have you thought about your remote agents to report via a post to the server instead of a pull?
I have a windows node that does not have a public IP address but my main Server does.
It would be nice if the agent software would have a field where I can specify the server IP address and it pulls the config every x minutes and reports back stats every x minutes ...
Daniel
I understand the scenario you describe, but right now there are no such plans. Can you find another solution by having some kind of VPN between the systems? |
|
|
|
Can you add the ability to chose the coins prices and order shown on the bottom of the main app please?
Sure - that's on the roadmap |
|
|
|
|
Show Posts
