@fredeq, on your Coins page, for each coin you have some default data. How did you come across this data to input? I ask because I am trying to determine how to pull all coins to a program to find most profitable without using my own data and then be able to parse your data based on my known equipment and hash rates.
All active algorithms should match values for a single 280x card. As long as they are GPU mineable ofc Ok, so is it possible if I dont change that data that I could get innacurate results if I use nVidia vs AMD. If so, how can I change all the results from 1 command to inject say using a gtx 1070? Sorry for the questions, im just starting to learn coding with a friend. Your help is greatly appreciated! You need to pass your own hashrate & power & probably cost to each `/coins/coin-id.json` page separately - there is no way to just reuse values from `/coins` page. So in essence I could take ?utf8=%E2%9C%93&hr=1750.0&p=650.0&fee=3.0&cost=0.06&hcost=0.0&commit=Calculate and add it to every equihash coin and request data Correct. You can also drop utf8 and commit keys. You could also query `/coins` once for just equihash to check how those coins relate to each other (no fee or cost params though). Take note that for `/coins` params to be valid, you must always send positive `eth_hr`: " https://whattomine.com/coins.json?factor[eth_hr]=1.0&eq=true&factor[eq_hr]=111.0&factor[eq_p]=888.0"
|
|
|
@fredeq, on your Coins page, for each coin you have some default data. How did you come across this data to input? I ask because I am trying to determine how to pull all coins to a program to find most profitable without using my own data and then be able to parse your data based on my known equipment and hash rates.
All active algorithms should match values for a single 280x card. As long as they are GPU mineable ofc Ok, so is it possible if I dont change that data that I could get innacurate results if I use nVidia vs AMD. If so, how can I change all the results from 1 command to inject say using a gtx 1070? Sorry for the questions, im just starting to learn coding with a friend. Your help is greatly appreciated! You need to pass your own hashrate & power & probably cost to each `/coins/coin-id.json` page separately - there is no way to just reuse values from `/coins` page.
|
|
|
@fredeq, on your Coins page, for each coin you have some default data. How did you come across this data to input? I ask because I am trying to determine how to pull all coins to a program to find most profitable without using my own data and then be able to parse your data based on my known equipment and hash rates.
All active algorithms should match values for a single 280x card. As long as they are GPU mineable ofc
|
|
|
Does anyone have a rock solid Eco Bios for Rx 480 that works on reference cards with 4 or 8GB? Looking to safely and lazily flash bios on a bunch of different rx 480 cards and don't want to mess with optimizing the crap out of it, just lower power consumption at stock mem/core.
Check boysies low-power bios from https://forum.ethereum.org/categories/mining
|
|
|
Bug detected: When i calculated any cards but 280x speed and switches back to calculationg 280x speed - the 280x equihash speed becomes equal to rx480 speed (290s/s). Control+f5 only fix it back to 250s/s. Tested in latest Chrome/Firefox browsers.
New 280x speed for equihash is supposed to be 290 All good, save the new speed.
|
|
|
XMR miner update would be great indeed. Lets not kill Pascal yet with dual mining, please
|
|
|
Was kmd sold for 1 btc per kmd on bittrex? Has anyone sold it at 1 btc rate?It was showing 24 hours high and now 99% fall in price at 12000 Satoshi.
I have checked the orders history on launch and there was a trade, but very small. In total not even 0.1BTC got traded, before it started to level on 0.00014
|
|
|
Can anyone please walk me through the steps to setup the GPU miner with SuprNova?
Suprnova -> help -> getting started. Same goes for any pool DNTM I keep getting the error when I try to run it. "The program can't start because VCRUNTIME140.dll is missing from your computer. Try reinstalling the program to fix this problem" Had the same thing, just install vcredist 2015 update from microsoft. https://www.microsoft.com/en-US/download/details.aspx?id=48145
|
|
|
@fredeq, have you thought about adding a box for people to put fee's in? Fee's for pool's and fee's for dev's?
Never considered it to be honest. Main list should be used as a rough comparison between different coins. More detailed calculation is then made at single pages where you can alter difficulties, prices, fees.
|
|
|
In my end power cost field is grayed out on main page. I'd like to input 0.1 $ and calculate. However it works on specific coin page.
On main page there is a global `cost` field that has the price of "$/kWh". Need to input proper value there.
|
|
|
Pascal PASC relisted in the GPU section with new formula, checked profits for the last 24h and they match.
|
|
|
Delisted PASC for now though as I dont like the results, will check this tomorrow once 24h average normalizes. You can check algo for every coin at both the main list and the single calc to make sure Edit: Actually Blakecoin is in a different algo than DCR, but DCR, SIA, XVC are all part of blake with variations. Nicehash endpoint for Pascal is still active if anyone wants to compare.
|
|
|
Again, with my newb knowledge of mining, do you mean ethash and cryptonight? I do not see ETH/DCR on the front page
Its Ethash and Blake(14r), both of those algorithms should be "checked", meaning their buttons need to be blue, not grey. For example:
|
|
|
@fredeq
Is it possible for a user to change what coins show on the front page. Alot of the coins on the front I dont mine so I have to check single coins. Can you make the ability for me to go in the coin section and check just what I want to show? I can see how this would make the front page grow so keeping a static limit would still be good but currently I only have 2 algo's checked on the front and have to check a few other single coins.
All of this is possible, but without real user accounts it will mean more and more cookies. I like the idea though, it would solve the problem of not enough spots to list algos. I am curious what other algos do you browse? I can only think of pascal tbh. Will add it when nicehash releases support for it in a miner btw. Pascal is the main one over the course of the last few weeks, but i check decred and etherium. Since Im still new to mining i dont know if I can use the others on the main page currently as examples, I guess I would just like the ability to select what coins matter and watch them I dont get it then, both DCR and ETH are present on the main page.
|
|
|
@fredeq
Is it possible for a user to change what coins show on the front page. Alot of the coins on the front I dont mine so I have to check single coins. Can you make the ability for me to go in the coin section and check just what I want to show? I can see how this would make the front page grow so keeping a static limit would still be good but currently I only have 2 algo's checked on the front and have to check a few other single coins.
All of this is possible, but without real user accounts it will mean more and more cookies. I like the idea though, it would solve the problem of not enough spots to list algos. I am curious what other algos do you browse? I can only think of pascal tbh. Will add it when nicehash releases support for it in a miner btw.
|
|
|
This is for optimized settings and I measured around 115W. You don't need to modify memory timing or clocks for ZEC mining. You can use the factory bios and lower the GPU clock and voltage (also memory voltage).
Yes I am aware its not needed, just too lazy to keep reflashing the bios Honestly I thought that 240 is achiveable only with stock (or around) clocks. What are your core and mem to run 240@115W?
|
|
|
Anyone using the MSI Armer 4GB 470s and would like to share their results? That would be greatly appreciated.
I literally just posted about that model look back a page or something lol I looked back and we were talking about its rate and power consumption for ETH but didn't mention the hashrate for ZEC. Sorry for any confusion. for ZEC you will get 230-240sol/s with CZM v11.1, -i 6 This is for stock at around 140W right? I prefer hashing with ETH bios and lowered clocks that gives 220@110W
|
|
|
|