|
Hi,
all,
All the boards ordered before 30-Aug are shiped/packed . this will end tommorow
The next orders passed PnP now @ trough hole assembly and testing, will start shipping this week.
Nanofuries boards are here and go on PnP
S-hash boards trough hole/testing, first orders to be shipped tommorow
|
|
|
|
Still waiting for some response with nanofurys and hex boards.
HEX boaards are shiped every day Nano furies are in production |
|
|
|
|
this is air
You have an option for road DPD
|
|
|
|
http://technobit.eu/index.php?controller=attachment&id_attachment=101. Default IP address of mr-3020 is: 192.168.0.99/24 LAN only. Wireless support is completely removed. The reason is LACK of RAM + some usb issues reported in the forum
2. There is no root password configured – that is the first thing to be done
3. Make sure that your computer has L2 connection to router with IP address from same subnet – 192.168.0.0/24
4. Configure your network under Network Interfaces. There are two options (Static IP /Mask GW and DNS or DHCP client). PPPoE is not included in the build. We suggest to use static IP address. Change your timezone settings. Do not enable NTP client. Reboot the mr-3020. Wait one minute. Make sure that mr-3020 shows current time. Do not proceed forward if the time is not correct. Otherwise cgminer will never start!!!
5. Configure your pools, workers and stuff under Cgminer Configuration page
6. Press Save & Apply . Wait at least 5-10 seconds for cgminer to start/restart
7. All done – Take a look Cgminer API log. You might find some good stuff inside
Some notes for advanced users:
1. cgminer is executed in detached screen session. You can always ssh to mr-3020 and attach the screen with screen –r. Detach it with CTL+a+d. There is nicely formatted cgminer ncurses output flowing. Be careful with screen detaching – if you mess it up it will kill your screen + cgminer and you will have to restart it manually. Every time when you detach a session something similar shall happen
root@HEX16A:~# screen -r
[detached]
2. All unnecessary services are disabled by default. This applies to firewall and all corresponding kernel modules also. If you know what you wana do you will have to uncomment desired kernel modules located in /etc/modules.d/. They are commented out to save RAM.
3. There is ovpn support package installed by default. If you wanna use it please uncomment tun module located in /etc/modules.d/30-tun
4. API stats notes:
a. No Matching Work is not a hw error. It occurs when cgminer detects new block or during startup mostly. It has been contented as a reference only.
b. Reset Count – should be low. Let me say 3-4 resets per day. When reset occurs only 2-3 work results are lost if they are lost at all. When higher values are observed check your cooling + overvoltage+overclocking
c. USB Hardware Errors – they are added to HW errors stats. In general these are usb readings with bad checksums
d. [Chip1-16 Nonces] how many nonces a chip has found. Useful in case of dead chip and so on. Note variation (+-)between chips nonces is absolutely normal. Watch for obvious differences and zeros.
The cgminer + current build + HEX16A mining board is super stable. There is no need of cron restarts and such stuff. Cgminer hotplug is working fine on i386. Unfortunately it does not work with mr-3020 + openwrt. The hotplug support is disabled by default: --hotplug 0.
Enjoy!
|
|
|
|
Marto please update.....
Best way to do it place a new order and a comment to be shipped wit first one choose only packing |
|
|
|
Orders on technobit.eu Technobit HEX boards family simple setup guide http://www.megafileupload.com/en/file/506573/TECHNOBIT-HEX16--Setup-pdf.htmlThis thread is to announce that We are finalizing our design of 16 chip Bitfury based mining board 40 - 64 Gh/s 90 + W power supply 16 bit PIC controller USB interface Massive heat sink air cooled Here are some pictures of the board and prototype        |
|
|
|
|
I think it's pointless to make a pro/cons posts for Avalon.
So We are in , already approved to participate in this contest
Let's hope this time Avalon will manage to recover .
|
|
|
|
|
Update 7-Oct-2013
In Saturday the trough hole assembly of the first batch PCB's ( paid orders before 30-Aug-13) was finished.
@ the moment the boards are assembled to heatsinks, fans , uploded with firmware and tested for 24 hours.
The very first shipments of thei batch to be sent out tomorrow 8-Oct-2013 and last one shiped out until Friday.
The second batch of PCB's enter in PnP today most probably it will be together with 3-rd batch of PCB's , that are here already.
NanoFury USB Bitfury based miner the first 200 boards to be on the PnP machine until Friday, so first shipments in a week.
S-hash - First units to be shiped out Friday
|
|
|
|
|
Update 7-Oct-2013
In Saturday the trough hole assembly of the first batch PCB's ( paid orders before 30-Aug-13) was finished.
@ the moment the boards are assembled to heatsinks, fans , uploded with firmware and tested for 24 hours.
The very first shipments of thei batch to be sent out tomorrow 8-Oct-2013 and last one shiped out until Friday.
The second batch of PCB's enter in PnP today most probably it will be together with 3-rd batch of PCB's , that are here already.
NanoFury USB Bitfury based miner the first 200 boards to be on the PnP machine until Friday, so first shipments in a week.
S-hash - First units to be shiped out Friday
|
|
|
|
Hi, All 2 EUR option is : Only packing for custom shippin by your request
No delivery just packing- choose for custom shipping or bigger orders
The best price With this option you can organize your transport this is just packing and handling. Other options are with DPD |
|
|
|
|
We are working on new board design HEX16B.
More details when we are ready
|
|
|
|
|
We are working on new design HEX16B board.
More details as soon We are ready.
|
|
|
|
Thank you John Now please everybody from GB2 have time until tuesday 18:00 GMT to send me e-mail @ refund@technobit.eu if want a refund The chips are here but I'll try to make it happen if not you can always get the chips Best Regards: Martin Martin, You are confusing me. Here( https://bitcointalk.org/index.php?topic=217316.msg3165672#msg3165672) you stated that the ordered boards would be populated on Wednesday, now you are offering me the chance for a refund ?! If I can get a refund for my chips (400 chips, 34 BTC). I would like to do that and use these funds and the funds of my HEX16 boards to get Technobit S-hash 16 chip Bitfury based bitcoin miner boards from you. Please advise. Hi, Ben, Gb2 is dlivered and it was planed no refund. But I have some reqests for hex16 with chips. So I'm just asking in order to know how many participants want a refund. Then I'll propose an option Best Regards |
|
|
|
Thank you John Now please everybody from GB2 have time until tuesday 18:00 GMT to send me e-mail @ refund@technobit.eu if want a refund The chips are here but I'll try to make it happen if not you can always get the chips Best Regards: Martin Martin, You are confusing me. Here( https://bitcointalk.org/index.php?topic=217316.msg3165672#msg3165672) you stated that the ordered boards would be populated on Wednesday, now you are offering me the chance for a refund ?! If I can get a refund for my chips (400 chips, 34 BTC). I would like to do that and use these funds and the funds of my HEX16 boards to get Technobit S-hash 16 chip Bitfury based bitcoin miner boards from you. Please advise. Hi, Ben, Gb2 is dlivered and it was planed no refund. But I have some reqests for hex16 with chips. So I'm just asking in order to know how many participants want a refund. Then I'll propose an option Best Regards |
|
|
|
Thank you John Now please everybody from GB2 have time until tuesday 18:00 GMT to send me e-mail @ refund@technobit.eu if want a refund The chips are here but I'll try to make it happen if not you can always get the chips Best Regards: Martin |
|
|
|
when I talked to Steve on the phone he told me that in 2 days he will solve out bouth batches refund.... is has been like 4 days and no money in our wallets.
How hard is to refund btc pe people wallets... hey.. BTC is allmost instant!... WTF
Do have in mind that escrow funds are under control of John K and he is not around for the last few days. same here with my GB1 |
|
|
|
First/second week of october
Is it also for the NF Boards, or only for S-Hash. If not for the NF Boards, could you give an estimate if i order right now ? Hopefully yes |
|
|
|
|
Show Posts
