PPOC
|
|
January 15, 2016, 05:33:24 AM |
|
Anyone have experience using the S7 in an upright position where it's sitting on a wire shelf with the exhaust fan pointing to the ceiling and the intake fan at the bottom? I'm hearing that this would increase the risk of the heat sink falling and burning out the boards but when I look at the pictures of the internal, regardless of what position there will always be some heat sink that will be in a vertical position. Any other reason why I should avoid this particular configuration? Intake air wont be block as it's wire shelves below have plenty of gaps for air. My goal is to point all the exhaust fans to the ceiling Vent for better efficiency.
I have 3 running in this configuration and using fans in drop ceiling to pull all the hot air above the drop ceiling. Works well, I just zip tied the corners of the miner fans to the wire rack to make sure they don't tip over.
|
BTC: 1Bo6YsPeHCrVRygHLJg9BwHeaLSQpppcJi "Lost coins only make everyone else’s coins worth slightly more. Think of it as a donation to everyone."
|
|
|
nhando
|
|
January 15, 2016, 05:39:20 AM |
|
Anyone have experience using the S7 in an upright position where it's sitting on a wire shelf with the exhaust fan pointing to the ceiling and the intake fan at the bottom? I'm hearing that this would increase the risk of the heat sink falling and burning out the boards but when I look at the pictures of the internal, regardless of what position there will always be some heat sink that will be in a vertical position. Any other reason why I should avoid this particular configuration? Intake air wont be block as it's wire shelves below have plenty of gaps for air. My goal is to point all the exhaust fans to the ceiling Vent for better efficiency.
I have 3 running in this configuration and using fans in drop ceiling to pull all the hot air above the drop ceiling. Works well, I just zip tied the corners of the miner fans to the wire rack to make sure they don't tip over. Can I see a picture of this? I was thinking of using the S7 built in groove and connect 6 on 1 side of the rack and 6 on the other side. The lower Rack will have the PSU running the power up to them. from the left and right side.
|
Just "Mining" my own business.
|
|
|
adaseb
Legendary
Offline
Activity: 3794
Merit: 1723
|
|
January 15, 2016, 06:37:49 AM |
|
Probably the first time the S7 is below $1K
Price: 2.4 BTC ( 990.67 USD )
|
|
|
|
HagssFIN
Legendary
Offline
Activity: 2436
Merit: 1706
Electrical engineer. Mining since 2014.
|
|
January 15, 2016, 07:22:09 AM |
|
Probably the first time the S7 is below $1K
Price: 2.4 BTC ( 990.67 USD )
Nope, got mine for 974 USD per pcs in December (B9)
|
|
|
|
MasterMG
Newbie
Offline
Activity: 12
Merit: 0
|
|
January 15, 2016, 07:52:02 AM |
|
Probably the first time the S7 is below $1K
Price: 2.4 BTC ( 990.67 USD )
Nope, got mine for 974 USD per pcs in December (B9) Yeah but what did shipping cost you? Do you live in NA?
|
|
|
|
adaseb
Legendary
Offline
Activity: 3794
Merit: 1723
|
|
January 15, 2016, 08:16:00 AM |
|
Well its definately now cheaper then before.
Price: 2.4 BTC ( 960 USD )
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
January 15, 2016, 08:19:55 AM |
|
Well its definately now cheaper then before.
Price: 2.4 BTC ( 960 USD )
Will be interesting to see what happens they had it on fixed BTC as it seemed to be rising and was better then fixed USD. I really would not be surprised if we see a switch back to fixed USD if it drops much more. Or I could be wrong and they sell at lower price hoping for more sales.
|
|
|
|
MasterMG
Newbie
Offline
Activity: 12
Merit: 0
|
|
January 15, 2016, 08:41:09 AM |
|
Well its definately now cheaper then before.
Price: 2.4 BTC ( 960 USD )
Will be interesting to see what happens they had it on fixed BTC as it seemed to be rising and was better then fixed USD. I really would not be surprised if we see a switch back to fixed USD if it drops much more. Or I could be wrong and they sell at lower price hoping for more sales. No really. I am asking. Has anyone got these shipped to the USA From Bitmain China ? How long did it take. What does it cost? I hear their support doesn't exist at all. So. Hopefully they run flawlessly or else. Doomed. Comments ?
|
|
|
|
adaseb
Legendary
Offline
Activity: 3794
Merit: 1723
|
|
January 15, 2016, 09:52:29 AM |
|
Well its definately now cheaper then before.
Price: 2.4 BTC ( 960 USD )
Will be interesting to see what happens they had it on fixed BTC as it seemed to be rising and was better then fixed USD. I really would not be surprised if we see a switch back to fixed USD if it drops much more. Or I could be wrong and they sell at lower price hoping for more sales. No really. I am asking. Has anyone got these shipped to the USA From Bitmain China ? How long did it take. What does it cost? I hear their support doesn't exist at all. So. Hopefully they run flawlessly or else. Doomed. Comments ? They do honor warranty but it takes a while before they ship you a hash board back.
|
|
|
|
aurel57
Legendary
Offline
Activity: 1176
Merit: 1000
|
|
January 15, 2016, 10:22:12 AM |
|
Well it looks like I received my Batch 1 compensation about 1 hour ago from Bitmain. Thank you
|
|
|
|
scyth33
Member
Offline
Activity: 99
Merit: 10
|
|
January 15, 2016, 11:54:13 AM |
|
bitmain listed their 3 pin s7 control board on their web.
|
|
|
|
tutorialevideo
Legendary
Offline
Activity: 1161
Merit: 1001
Don`t invest more than you can afford to lose
|
|
January 15, 2016, 12:34:59 PM |
|
bitmain listed their 3 pin s7 control board on their web.
Yes... this is ok.. because wee can buy directly replacement parts.
|
|
|
|
AriesIV10
Legendary
Offline
Activity: 1260
Merit: 1006
Mine for a Bit
|
|
January 15, 2016, 12:49:09 PM |
|
Well it looks like I received my Batch 1 compensation about 1 hour ago from Bitmain. Thank you
Wooohooo! I got mine toooooo!
|
|
|
|
clgrissom3
Legendary
Offline
Activity: 1722
Merit: 1032
Carl, aka Sonny :)
|
|
January 15, 2016, 01:17:39 PM |
|
Well it looks like I received my Batch 1 compensation about 1 hour ago from Bitmain. Thank you
Wooohooo! I got mine toooooo! Same here...Bitmain came through on their promise.
|
|
|
|
adaseb
Legendary
Offline
Activity: 3794
Merit: 1723
|
|
January 15, 2016, 01:46:02 PM |
|
Speed: 4.73TH/S Weight: 4.5 kg Price: 2.4 BTC ( 925.32 USD )
Looks like its basically costing exactly half of what it did when it was initially introduced in September. Wasn't the list price like $1800 USD ?
|
|
|
|
nhando
|
|
January 15, 2016, 02:36:55 PM |
|
Still dropping due to BTC price. Saw as low as $912.
|
Just "Mining" my own business.
|
|
|
Prelude
Legendary
Offline
Activity: 1596
Merit: 1000
|
|
January 15, 2016, 03:07:54 PM |
|
Well it looks like I received my Batch 1 compensation about 1 hour ago from Bitmain. Thank you
Wooohooo! I got mine toooooo! Same here...Bitmain came through on their promise. Wow, good on bitmain. Looks like they've improved since the S4 PSU fiasco.
|
|
|
|
edonkey
Legendary
Offline
Activity: 1150
Merit: 1004
|
|
January 15, 2016, 03:16:58 PM |
|
Well it looks like I received my Batch 1 compensation about 1 hour ago from Bitmain. Thank you
Wooohooo! I got mine toooooo! Same here...Bitmain came through on their promise. Wow, good on bitmain. Looks like they've improved since the S4 PSU fiasco. I got mine too. They made good on their promise, even if the amount of the compensation is underwhelming. I bet they had to write new code to deliver the compensation. That's probably partly why it took so long. Hard to prioritize coding resources for the goal of losing money. Of course the justification would be improved PR with the community. The lesson for Bitmain is to make good on their published deadlines rather than dealing with costly compensation efforts. If they had just shipped batch 1 before the holiday, none of this would have happened.
|
Was I helpful? BTC: 3G1Ubof5u8K9iJkM8We2f3amYZgGVdvpHr
|
|
|
thedreamer
Legendary
Offline
Activity: 1694
Merit: 1002
Go Big or Go Home.....
|
|
January 15, 2016, 03:24:56 PM |
|
Well it looks like I received my Batch 1 compensation about 1 hour ago from Bitmain. Thank you
Wooohooo! I got mine toooooo! Same here...Bitmain came through on their promise. What did u guys get? Me and a few ppl haven't gotten anything.
|
Go Big or Go Home.
|
|
|
aurel57
Legendary
Offline
Activity: 1176
Merit: 1000
|
|
January 15, 2016, 03:42:08 PM |
|
Well it looks like I received my Batch 1 compensation about 1 hour ago from Bitmain. Thank you
Wooohooo! I got mine toooooo! Same here...Bitmain came through on their promise. What did u guys get? Me and a few ppl haven't gotten anything. JAN 15 Received bitcoin from bitcoin address +0.11136684 BTC +$45.47 USD
|
|
|
|
|