notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2016, 02:06:42 AM |
|
Does those 2 boards report much higher temperature as a result compared to the 3rd hash board? Curious as I want to be able to spot these issues in the future if it happens remotely.
I think he got lucky. It would be very easy not to notice it, which is the scary part. And the heats sinks are made of metal so if they hit the wrong spot on the board it can be a very bad result. With 2 having issues Droid was there anything in common you noticed? Or just plan bad luck.
|
|
|
|
-droid-
Legendary
Offline
Activity: 1050
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2016, 02:09:20 AM |
|
Does those 2 boards report much higher temperature as a result compared to the 3rd hash board? Curious as I want to be able to spot these issues in the future if it happens remotely.
I think he got lucky. It would be very easy not to notice it, which is the scary part. And the heats sinks are made of metal so if they hit the wrong spot on the board it can be a very bad result. With 2 having issues Droid was there anything in common you noticed? Or just plan bad luck. I hadn't even tried to run them, I noticed as I was moving them the clanking.. I think they may have fallen off after placing them on their new shelf.. Maybe the litte thump from setting them down was enough to just pop off
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2016, 02:11:48 AM |
|
Does those 2 boards report much higher temperature as a result compared to the 3rd hash board? Curious as I want to be able to spot these issues in the future if it happens remotely.
I think he got lucky. It would be very easy not to notice it, which is the scary part. And the heats sinks are made of metal so if they hit the wrong spot on the board it can be a very bad result. With 2 having issues Droid was there anything in common you noticed? Or just plan bad luck. I hadn't even tried to run them, I noticed as I was moving them the clanking.. I think they may have fallen off after placing them on their new shelf.. Maybe the litte thump from setting them down was enough to just pop off Interesting I'm glad you found it before any damage. That is kinda scary if caused from just moving shelf's. I was not guessing something as little as that was cause. Thanks for sharing.
|
|
|
|
-droid-
Legendary
Offline
Activity: 1050
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2016, 02:22:37 AM |
|
Does those 2 boards report much higher temperature as a result compared to the 3rd hash board? Curious as I want to be able to spot these issues in the future if it happens remotely.
I think he got lucky. It would be very easy not to notice it, which is the scary part. And the heats sinks are made of metal so if they hit the wrong spot on the board it can be a very bad result. With 2 having issues Droid was there anything in common you noticed? Or just plan bad luck. I hadn't even tried to run them, I noticed as I was moving them the clanking.. I think they may have fallen off after placing them on their new shelf.. Maybe the litte thump from setting them down was enough to just pop off Interesting I'm glad you found it before any damage. That is kinda scary if caused from just moving shelf's. I was not guessing something as little as that was cause. Thanks for sharing. Yeah I ordered a couple rPi heatsinks after I saw the sink on the end tumbling around, but then realized a second one was loose also. Just sent an email to Sherry to see what she wants me to do Also on another note Has anyone had issues sliding two together and the two getting stuck? I've got a B7 and B8 slid together with the aluminum rails and for the life of me I can't slide them apart now. Seems maybe the metal swelled or there might have been a little shard of aluminum on the track and wedged itself in there causing it to jam up. I'm probably going to have to keep them permanently together now lol
|
|
|
|
OgNasty
Donator
Legendary
Offline
Activity: 4830
Merit: 4535
Leading Crypto Sports Betting & Casino Platform
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2016, 02:53:05 AM |
|
Dang I hope they get it fixed up this time, that does sound like a pain. Out of curosity when you say using EVGA PSU's are you using EVGA 1600's?
Just was curious on which EVGA PSU it was.
I use 2 EVGA 1300s for each S7. I've got a bunch laying around.
|
..Stake.com.. | | | ▄████████████████████████████████████▄ ██ ▄▄▄▄▄▄▄▄▄▄ ▄▄▄▄▄▄▄▄▄▄ ██ ▄████▄ ██ ▀▀▀▀▀▀▀▀▀▀ ██████████ ▀▀▀▀▀▀▀▀▀▀ ██ ██████ ██ ██████████ ██ ██ ██████████ ██ ▀██▀ ██ ██ ██ ██████ ██ ██ ██ ██ ██ ██ ██████ ██ █████ ███ ██████ ██ ████▄ ██ ██ █████ ███ ████ ████ █████ ███ ████████ ██ ████ ████ ██████████ ████ ████ ████▀ ██ ██████████ ▄▄▄▄▄▄▄▄▄▄ ██████████ ██ ██ ▀▀▀▀▀▀▀▀▀▀ ██ ▀█████████▀ ▄████████████▄ ▀█████████▀ ▄▄▄▄▄▄▄▄▄▄▄▄███ ██ ██ ███▄▄▄▄▄▄▄▄▄▄▄▄ ██████████████████████████████████████████ | | | | | | ▄▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▄ █ ▄▀▄ █▀▀█▀▄▄ █ █▀█ █ ▐ ▐▌ █ ▄██▄ █ ▌ █ █ ▄██████▄ █ ▌ ▐▌ █ ██████████ █ ▐ █ █ ▐██████████▌ █ ▐ ▐▌ █ ▀▀██████▀▀ █ ▌ █ █ ▄▄▄██▄▄▄ █ ▌▐▌ █ █▐ █ █ █▐▐▌ █ █▐█ ▀▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▀█ | | | | | | ▄▄█████████▄▄ ▄██▀▀▀▀█████▀▀▀▀██▄ ▄█▀ ▐█▌ ▀█▄ ██ ▐█▌ ██ ████▄ ▄█████▄ ▄████ ████████▄███████████▄████████ ███▀ █████████████ ▀███ ██ ███████████ ██ ▀█▄ █████████ ▄█▀ ▀█▄ ▄██▀▀▀▀▀▀▀██▄ ▄▄▄█▀ ▀███████ ███████▀ ▀█████▄ ▄█████▀ ▀▀▀███▄▄▄███▀▀▀ | | | ..PLAY NOW.. |
|
|
|
djroadking
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 92
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2016, 04:02:17 AM |
|
I'll finally get my S7 tomorrow and will be able to update you guys on if I have a customs charge from UPS or not. Hopefully the miner doesn't have any issues but seeing as plenty of you are having problems with dead boards or heatsinks falling off... I guess I should be expecting something.
|
|
|
|
Elphamyto
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 117
Merit: 16
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2016, 06:16:11 AM |
|
Can someone with Bitmain RMA experience or familiarity tell me the best way to get in touch with Bitmain. I need to RMA a defective board from Batch 9 and I've had a support ticket open for a few days now w/o response. I realize this isn't a support thread, but I see that several people here have been through the process of returning boards. There is an email for xiaorui.liu@bitmain.com on their workOrderGuide web page, but I don't know if that's for initiating a return. Thanks
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2016, 06:36:30 AM |
|
Can someone with Bitmain RMA experience or familiarity tell me the best way to get in touch with Bitmain. I need to RMA a defective board from Batch 9 and I've had a support ticket open for a few days now w/o response. I realize this isn't a support thread, but I see that several people here have been through the process of returning boards. There is an email for xiaorui.liu@bitmain.com on their workOrderGuide web page, but I don't know if that's for initiating a return. Thanks RMA requests are actually info@bitmaintech.com on email's. So I would send a email that way. I will warn they have got harder on warranty. Don' t take apart and try to fix or they consider it voiding warranty unless you had permission.
|
|
|
|
mavericklm
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2016, 06:51:44 AM |
|
OgNasty, I'm sorry to hear that, maybe it helps a tinny bit ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) The rma process is a mess, quality control.... Let's hope we will have broader market with bitfury and BW coming in!
|
|
|
|
djroadking
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 92
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2016, 08:19:22 PM |
|
Just got my S7 from UPS. Had to pay a $5 dollar service charge but that's nothing.
|
|
|
|
Entropize
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2016, 08:40:34 PM |
|
The batch 9 s7 only has 3 hookups on the controller for boards, I can see where on the board the other 6 would go but I'm not taking a soldering iron to the thing. No more controlling more than one s7 with 1 controller board.
|
Got friends and family bugging you to explain Bitcoin? Point them to https://bitcoinfaq.info for some answers. I've built the site to have simple answers to complete newcomers and info on what is involved in getting started with mining. I'm openly taking questions and updating the site with answers and walk-throughs.
|
|
|
hawkfish007
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2016, 09:45:32 PM |
|
The batch 9 s7 only has 3 hookups on the controller for boards, I can see where on the board the other 6 would go but I'm not taking a soldering iron to the thing. No more controlling more than one s7 with 1 controller board.
Someone reported to receive B9 with 6 fan ports and 9 ports for boards.
|
|
|
|
alh
Legendary
Offline
Activity: 1845
Merit: 1052
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2016, 10:41:05 PM |
|
The batch 9 s7 only has 3 hookups on the controller for boards, I can see where on the board the other 6 would go but I'm not taking a soldering iron to the thing. No more controlling more than one s7 with 1 controller board.
Someone reported to receive B9 with 6 fan ports and 9 ports for boards. Nothing says that they MUST be uniform across the batch. As long as the controller has the required ports to run what they ship, Bitmain has fulfilled their obligation. Maybe somebody got lucky and got an earlier batch controller, or possibly a new batch for a possible S7+. Good that folks report what they get though. Buyers just should NOT depend on it being something more than is required.
|
|
|
|
djroadking
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 92
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2016, 10:45:03 PM |
|
Have my S7 running ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Due to the amount of noise it makes I underclocked it's frequency to 400. Getting 3TH at that rate. Whenever I find a better place to keep it running I'll up the frequency a bit. There's no way that I'll be sleeping with it in my room.
|
|
|
|
nhando
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2016, 11:14:36 PM |
|
Have my S7 running ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Due to the amount of noise it makes I underclocked it's frequency to 400. Getting 3TH at that rate. Whenever I find a better place to keep it running I'll up the frequency a bit. There's no way that I'll be sleeping with it in my room. Why not run it in the garage at full blast and get free heat while you're at it? You're losing money at 3TH. If you're living in a cold weather area, lower the fan to 30% and see if the temp is within ok range. IT would be more livable. You can also buy custom 3D printed DUCT where you duct the Intake to take in cold intake air from outside and push out the hot air to the outside as well. If you do that, you can lower your fan speed which is the only thing that is making those noise. http://www.ebay.com/itm/4-pack-bitcoin-antminer-s1-s2-s3-s4-s5-s7-zeus-lightning-fan-air-duct-4-pack-/331763938079?hash=item4d3eabf31f:g:edgAAOSwpRRWn~Hp
|
Just "Mining" my own business.
|
|
|
rockyforever
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 28, 2016, 12:57:11 AM |
|
Have my S7 running ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Due to the amount of noise it makes I underclocked it's frequency to 400. Getting 3TH at that rate. Whenever I find a better place to keep it running I'll up the frequency a bit. There's no way that I'll be sleeping with it in my room. Why not run it in the garage at full blast and get free heat while you're at it? You're losing money at 3TH. If you're living in a cold weather area, lower the fan to 30% and see if the temp is within ok range. IT would be more livable. You can also buy custom 3D printed DUCT where you duct the Intake to take in cold intake air from outside and push out the hot air to the outside as well. If you do that, you can lower your fan speed which is the only thing that is making those noise. http://www.ebay.com/itm/4-pack-bitcoin-antminer-s1-s2-s3-s4-s5-s7-zeus-lightning-fan-air-duct-4-pack-/331763938079?hash=item4d3eabf31f:g:edgAAOSwpRRWn~HpI would be careful with that seller on ebay, has only sold one item ever. Only has sold one item in last 12 months and it was stated in feedback that communication was good but shipping was slow after payment.
|
|
|
|
nhando
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 28, 2016, 01:12:53 AM |
|
I'm not concern. I just ordered 10 from him. I will be doing a review on it and he also made me 2 custom FAN mount with Bitcoin symbol. He sent me the picture of the design and included it for free as I will be helping promote the product if it's good. I think it's the perfect solution for my Plenum design or anyone with a small config where you just vent the heat outside or do a full circule from outside and inside air.
|
Just "Mining" my own business.
|
|
|
sidehack
Legendary
Offline
Activity: 3360
Merit: 1859
Curmudgeonly hardware guy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 28, 2016, 02:24:41 AM |
|
Just got a brand new S7 arrived from Bitmain bought by a hosting customer. Just out of the box and I see one of the power jacks on the middle board already has a bit of heat browning to it. Not terribly impressed by that.
|
|
|
|
Biodom
Legendary
Offline
Activity: 3850
Merit: 4227
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 28, 2016, 02:32:26 AM Last edit: January 28, 2016, 05:10:02 AM by Biodom |
|
Just got a brand new S7 arrived from Bitmain bought by a hosting customer. Just out of the box and I see one of the power jacks on the middle board already has a bit of heat browning to it. Not terribly impressed by that.
It was well-tested, I suppose... ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) That said, one of mine also had the same (and also on the middle board) when I first got it...but it is OK so far. The first (or second?) S1 that I ever had was so brown in the connector area (it was obviously used before the sell) that I wasn't sure if it was OK to use, but it turned out to be the best performer, which was successfully resold later on and used by another person with no probs as well. The "beast" also had a cracked fan...memories.
|
|
|
|
|
|