[ANN] Neutron Crypto Coin Project (NTRN) Version 4.1.2 available now.

[frostminer]

Ok guys we are working really hard to try to fix things with yobit but they really have our hands tied.

They seem to refuse to talk to us:





Tickets are over a month old, no reply, but they tell users who inquire the same generic message that isn't even true.


We have 3 Devs available to help them if they would simply talk to us.

However as I have said before they are running the same Daemon that both Cryptopia and Novaexchange are with no issues.


Please do not trade NTRN at yobit until we can get their attention and resolve this.


We are firing at them on twitter,, in our slack,, here,,

I will now document all of my correspondence with them and go public with it

This is normal.
They wont respond for a few months, at best.

Go look in other threads having problems with them (90%+ of all coins listed there)

EVEN PAYING 0,5 BTC WONT MAKE THEM ANSWER WITHIN ONE MONTH.


I cant understand why ppl use yoshit.

[1715083977]

1715083977

[1715083977]

1715083977

[polylogic]

Please read the release notes,

https://github.com/neutroncoin/neutron/releases/tag/v1.1.2

So is this a release or a test? Because it says windows build isn't available, but I see a win32 build?

audiotopix, the first page of the ann doesnt include v 1.1.2
i almost missed it, no announcement or notification, did i miss the Twitter alert?
ist very late here, im tempted to test out the new Version..
i should still have parts of the blockchain, maybe sync will be quick

[Rimus]

Is it possible to simultaneously run masternode with staking wallet?

I run the masternode without

Code:

staking=0

option in neutron.conf. It runs, got paid in MN reward but then it found a POS block and my 25,000 NTRN masternode output splits into two 12,500 outputs.

Is it possible to lock 25,000 NTRN to run a masternode allowing other coins in wallet for POS minting?

[polylogic]

ok so i am currently testing the windows wallet for running a masternode, after first payout from network the node got kicked of the masternode list. i think i had to restart the mn.
status tab still not working. still wrong payout values. little problems, but mn must run stable please

ill test the linux version next

[Parsa1]

Anyone can help please,

I can start mn from the wallet but not from the console. The clock doesnt move so I guess my mn is not active. Last week once i got 13 NUTN rewards, that was it. Wallet also lock itself. I have made the following conf files as masternode.conf and neutron.conf and added them to the directory.

staking=0
rpcallowip=127.0.0.1
rpcuser= i put my user name
rpcpassword=and my code
server=1
listen=1
port=9999
masternode=1
masternodeaddr=I put my public ip:9999
masternodeprivkey=xxxxx my mn private key

When I unlock my wallet, shall I choose staking or anominization ? i do not know what I am missing. Any suggestions ? Thanks forehand.
I have win wallet.

[collapse]

Anyone can help please,

I can start mn from the wallet but not from the console. The clock doesnt move so I guess my mn is not active. Last week once i got 13 NUTN rewards, that was it. Wallet also lock itself. I have made the following conf files as masternode.conf and neutron.conf and added them to the directory.

staking=0
rpcallowip=127.0.0.1
rpcuser= i put my user name
rpcpassword=and my code
server=1
listen=1
port=9999
masternode=1
masternodeaddr=I put my public ip:9999
masternodeprivkey=xxxxx my mn private key

When I unlock my wallet, shall I choose staking or anominization ? i do not know what I am missing. Any suggestions ? Thanks forehand.
I have win wallet.

Unlock the wallet:

Code:

neutrond walletpassphrase yourpassphrase 120

and start the masternode as soon as possible:

Code:

neutrond masternode start

masternode.conf is ignored.  The code needs improvements,..., a total remake (clone PIVX code with Neutron parameters seems a good idea).
Instantx and other  (Dash) things are disabled/decorative in Neutron. Multi-masternode, masternode.conf file is one.

[Parsa1]

Anyone can help please,

I can start mn from the wallet but not from the console. The clock doesnt move so I guess my mn is not active. Last week once i got 13 NUTN rewards, that was it. Wallet also lock itself. I have made the following conf files as masternode.conf and neutron.conf and added them to the directory.

staking=0
rpcallowip=127.0.0.1
rpcuser= i put my user name
rpcpassword=and my code
server=1
listen=1
port=9999
masternode=1
masternodeaddr=I put my public ip:9999
masternodeprivkey=xxxxx my mn private key

When I unlock my wallet, shall I choose staking or anominization ? i do not know what I am missing. Any suggestions ? Thanks forehand.
I have win wallet.

Unlock the wallet:

Code:

neutrond walletpassphrase yourpassphrase 120

and start the masternode as soon as possible:

Code:

neutrond masternode start

masternode.conf is ignored.  The code needs improvements,..., a total remake (clone PIVX code with Neutron parameters seems a good idea).
Instantx and other  (Dash) things are disabled/decorative in Neutron. Multi-masternode, masternode.conf file is one.

Thank you, But when I try these codes in console I receive this error:    Method not found (code -32601)

Amsterdam coin has used clone wallet of PIVX and that wallet is one of the best and reliable. I do not know why Devs here still working on this usless wallet. it always says "not responding" and hangs alot. I asked a VPS host to run my Neutron MN but he said he doesnt accept neutron as this wallet is a big issue and he must give daily support to owners.
So I do not know how to start my MN. I am working on it in one week now.

[collapse]

Thank you, But when I try these codes in console I receive this error:    Method not found (code -32601)

Something wrong with your wallet, or not encrypted as you said.

What version of wallet do you have?.  New one, should work fine. Logging/CPU eating in masternodes echo ("Accepted Inputs for MN" and "Stake Modifier") problems solved in new version (not commented debug info).

https://github.com/audiotopix/Neutron

Code:

neutrond help

Returns "walletpassphrase" and "masternode" methods?

[Parsa1]

Thank you, But when I try these codes in console I receive this error:    Method not found (code -32601)

Something wrong with your wallet, or not encrypted as you said.

What version of wallet do you have?.  New one, should work fine. Logging/CPU eating in masternodes echo ("Accepted Inputs for MN" and "Stake Modifier") problems solved in new version (not commented debug info).

https://github.com/audiotopix/Neutron

Code:

neutrond help

Returns "walletpassphrase" and "masternode" methods?

Thanks Collapse,

I tried the code you mentioned:


00:55:54  neutrond help
00:55:54  Method not found (code -32601)

I installed the new wallet version yesterday from Github.
The wallet is incrypted.
It says it is started when I start it under my nuclious. But it is not started cause it shows active 00m:00s all the time.

[collapse]

00:55:54  neutrond help
00:55:54  Method not found (code -32601)

   Are you running neutron-qt wallet or neutrond daemon?

If you are running the qt wallet you can try daemon=1 and server=1 in neutron.conf. And restart the wallet.

If you are running neutrond I have no idea... but something is broken. This should not happen.


Or wait a moment,...,for me console is OS command line, ...., but seems that you are writing on qt wallet console.
In this case you do not need "neutrond", the daemon command,..., because you are already in RPC console.

Code:

walletpassphrase replacethiswithyourpassword 120

Code:

masternode start

[polylogic]

so i left the hot windows wallet masternode running for a couple of hours.
i didnt get any payments this time but the masternode still vanished from the list.
when i try "masternode debug" in cold wallet console no problems were found.

my hot wallet only shows 8 nodes in mn list
i guess this happenend because i set max connections 10 in config.
i removed this and it now shows 169+ (still counting) masternodes with 17 connections.
this seems right. i have the same problem with timer not moving.
lets see how long this stays online than ill get back to linux.
windows masternode still not stable enough.

-help -- about neutron ... need version number change.
-unresponsivenes has been fixed or only hidden? if you try to sort masternode list it wont lock up, but needs some time to sort also i see now with 200+ mn it is still unresponsive from time to time..

anyway, good job on the update, keep it up

[greenhope]

Is it possible to simultaneously run masternode with staking wallet?

I run the masternode without

Code:

staking=0

option in neutron.conf. It runs, got paid in MN reward but then it found a POS block and my 25,000 NTRN masternode output splits into two 12,500 outputs.

Is it possible to lock 25,000 NTRN to run a masternode allowing other coins in wallet for POS minting?

I think it's not possible that running a Mn and staking in a wallet.

[greenhope]

Anyone can help please,

I can start mn from the wallet but not from the console. The clock doesnt move so I guess my mn is not active. Last week once i got 13 NUTN rewards, that was it. Wallet also lock itself. I have made the following conf files as masternode.conf and neutron.conf and added them to the directory.

staking=0
rpcallowip=127.0.0.1
rpcuser= i put my user name
rpcpassword=and my code
server=1
listen=1
port=9999
masternode=1
masternodeaddr=I put my public ip:9999
masternodeprivkey=xxxxx my mn private key

When I unlock my wallet, shall I choose staking or anominization ? i do not know what I am missing. Any suggestions ? Thanks forehand.
I have win wallet.

Guess you're running on a windows system.
Since you have neutron.conf and masternode.conf with same contents,
1.Restart wallet and unlock if you have encrypted your wallet. Btw, I just uncheck the staking box and leave the other unchecked, but not sure it makes a difference.
2.Go to Nucleus tab and start your masternode.
3.Go to Debug Console. Put masternode start. It should return masternode started successfully.
4.Some reason, the wallet gets locked again after the input on console. Unlock the wallet with both boxes unchecked.
5.Check if your masternode is visible on Nucleus Network.
6.You should see active time is recorded after 10 to 15 minutes later, then your MN is working.
7.Redo this process whenever you restart your system.
Well, this it how I made mine work, so it is YMMV.

[Parsa1]

Anyone can help please,

I can start mn from the wallet but not from the console. The clock doesnt move so I guess my mn is not active. Last week once i got 13 NUTN rewards, that was it. Wallet also lock itself. I have made the following conf files as masternode.conf and neutron.conf and added them to the directory.

staking=0
rpcallowip=127.0.0.1
rpcuser= i put my user name
rpcpassword=and my code
server=1
listen=1
port=9999
masternode=1
masternodeaddr=I put my public ip:9999
masternodeprivkey=xxxxx my mn private key

When I unlock my wallet, shall I choose staking or anominization ? i do not know what I am missing. Any suggestions ? Thanks forehand.
I have win wallet.

Guess you're running on a windows system.
Since you have neutron.conf and masternode.conf with same contents,
1.Restart wallet and unlock if you have encrypted your wallet. Btw, I just uncheck the staking box and leave the other unchecked, but not sure it makes a difference.
2.Go to Nucleus tab and start your masternode.
3.Go to Debug Console. Put masternode start. It should return masternode started successfully.
4.Some reason, the wallet gets locked again after the input on console. Unlock the wallet with both boxes unchecked.
5.Check if your masternode is visible on Nucleus Network.
6.You should see active time is recorded after 10 to 15 minutes later, then your MN is working.
7.Redo this process whenever you restart your system.
Well, this it how I made mine work, so it is YMMV.

Thank you Greenhope,
masternode starts from the tab but it doesnt start from the console when I put "masternode start".
It says: not capable masternode: Could not connect to 92.211.134.34:9999
The masternode is visible on Nucleus network but with no active time.
I also unchecked the staking box etc.
someting is missing and i dont know what !!!
i wonder if anyone else has the same issue ?

[greenhope]

Thank you Greenhope,
masternode starts from the tab but it doesnt start from the console when I put "masternode start".
It says: not capable masternode: Could not connect to 92.211.134.34:9999
The masternode is visible on Nucleus network but with no active time.
I also unchecked the staking box etc.
someting is missing and i dont know what !!!
i wonder if anyone else has the same issue ?

Sounds like the port is not open.
Are you sure the port is open?
Did you check with sites like canyouseeme.org?
I was not able to open some ports after forwarding.
It's strange but I've experienced getting reward when the port was actually closed.
Also that masternode run didn't last long, off the list in a couple of hours.

[pshemek]

are you sure it is the only wallet you have open that uses this port. i mean dash uses that port so maybe others do too.

[Rimus]

Is it possible to simultaneously run masternode with staking wallet?

I run the masternode without

Code:

staking=0

option in neutron.conf. It runs, got paid in MN reward but then it found a POS block and my 25,000 NTRN masternode output splits into two 12,500 outputs.

Is it possible to lock 25,000 NTRN to run a masternode allowing other coins in wallet for POS minting?

I think it's not possible that running a Mn and staking in a wallet.

Danm it... it works for other PoS+MN coins but not for Neutron.

Well, thank you for clarifying this point!

[nshrd]

can i setup masternode by cold wallet method here?

[nshrd]

Also my wallet freezing on 3 different machines. How can i fix this problem? Its  dissapoint me argh

[heipp123]

https://github.com/michaelnewton/NTRN/blob/master/NTRN-Masternode-on-VPS-with-cold-wallet-setup.md

https://github.com/neutroncoin/neutron/releases/tag/v1.1.2

can i setup masternode by cold wallet method here?