[MOJO] MOJOv3 has been taken over by new devs

[bob75coin]

did you wrote a support ticket .. maybe they have trouble with the chain or with the new version.

@ebk1000 did livecoin already have the new version ?

regards

Hello

Your transaction has been declined by Mojo network, but not by us. We got the next error for your transaction:
Error: The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here.

P.S. Please check that you use wallet from new network. If that's the case, please contact Mojo developers with this explanation and ask them to clarify your issue.


P.P.S I have downloaded 2.1.0 wallet....

Now I downloaded 2.2

Can someone send me a 0.1 or less for test...I don't understand why I can't withdraw my mojo from livecoin...

here is the address

M9F1maUhNQkyeFetBo12zEvyvZj8rp9NCt

I will send it back immediately,

Thanks

[1714251397]

1714251397

[1714251397]

1714251397

[BBoBB]

@bob75coin done

@dev, i installed a VM with windows... moved my wallet to it and its staking like a working horse.. thanks for all the efforts that got us this far...

Cheers

[Emerger]

Is the source code at https://github.com/MojocoinV2/mojocoin up to date with the new version?

[Limx Dev]

Is the source code at https://github.com/MojocoinV2/mojocoin up to date with the new version?

Yes source is up to date for this error.

[bob75coin]

@bob75coin done

@dev, i installed a VM with windows... moved my wallet to it and its staking like a working horse.. thanks for all the efforts that got us this far...

Cheers

Thank you.
I will send back this night. (now I am not at home).

[FogHorn_LegHorn]

@bob75coin done

@dev, i installed a VM with windows... moved my wallet to it and its staking like a working horse.. thanks for all the efforts that got us this far...

Cheers

Your wallet is staking good? Mine isn't staking at all. I am on version 2.2 and my coins are weeks old. hmmmm.


Is anyone else staking?

[Jack Liver]

same problem wallet is open but not staking

[Limx Dev]

same problem wallet is open but not staking

You must only wait...mojo has only 4 blocks for POS per hour.

[FogHorn_LegHorn]

same problem wallet is open but not staking

You must only wait...mojo has only 4 blocks for POS per hour.

That doesn't make sense. 4 per hour isn't enough to secure the chain. If this is true then OP is incorrect. Block time is 60 seconds which means there should be 60 stakes per hour not 4. I realize that POW is still going on but 4 is not right.

[hagie]

Hi,

just a short info before I'm leaving on vacation for the next 10 days. I updated 3 Masternodes with the latest code. All Masternodes are running cold (without funds) started through the controller wallet.

At the moment it looks like it's working - I have turned staking off at the controller wallet because it still destroys my single 200.000 transaction.

Hope that works - good to see a German developer on board ...

Regards

[FogHorn_LegHorn]

@bob75coin done

@dev, i installed a VM with windows... moved my wallet to it and its staking like a working horse.. thanks for all the efforts that got us this far...

Cheers

Your wallet is staking good? Mine isn't staking at all. I am on version 2.2 and my coins are weeks old. hmmmm.


Is anyone else staking?

I eat my words. Mine is staking awesome now. Thank you.

edit: I have gotten way more than 4 stakes in an hour too.

[metamorphin]

Hi,

...good to see a German developer on board ...

Regards

Only a short crossmarketing
We in Europecoin are very proud to work with him. He is absolutely reliable and we always would be happy to fill him with tons of jobs! Promote him, market him, and let us know, if you find ppl searching for a help in coindevelopments.

Greetz
Steve

[Emerger]

Hi,

I have turned staking off at the controller wallet because it still destroys my single 200.000 transaction.

Regards

I am trying with the setting reservebalance=200000 with the new version 2.2. but suspect it may not prevent it from staking the masternode collateral, which will then disqualify the masternode. I am hoping that someone would be able to make a code change so that the masternode address never stakes - is that possible?

[Emerger]

I have turned staking off at the controller wallet because it still destroys my single 200.000 transaction.

I am trying with the setting reservebalance=200000 with the new version 2.2. but suspect it may not prevent it from staking the masternode collateral, which will then disqualify the masternode. I am hoping that someone would be able to make a code change so that the masternode address never stakes - is that possible?

EDIT: Never-mind my question for now. Seems this is already in the code (in wallet.cpp near the comment "do not use Hot MN funds")..  I'll re-setup my master-node again and see if the collateral stakes.

[GoldenEye]

Staking seems to be working now, in principle.
However, it appears that the staking amount is not right.

5,000 MOJO, coin age 3 weeks - earnings: 1.11 MOJO
https://chainz.cryptoid.info/mojo/address.dws?MAkVtpysByXLEQSYoRuFuaitgGN93XAcxD.htm

319,000 MOJO, coin age nearly 3 weeks - earnings: 1.19 MOJO
https://chainz.cryptoid.info/mojo/address.dws?MA8o6ZSKaAHwrAVqqwQXkXhKZzJeWQpC8Q.htm

It seems that staking only works well for small amounts of MOJO (up to 5,000).

Is it possible that the "overflow bug" still exists, which was reported / supposed here weeks ago?

[drays]

Manual swap from MOJO V1 to V2 is now open, sorry about the delay.
If you have old MOJO V1 coins that you did not manage to swap for V2 coins, then PM me with the amount. I know you may have sent a PM before but I get so many so that they may be lost sometimes. If you PM me with the amount you wanna swap and I'll give you a V1 address to send to.

I guess that if you haven't swapped you're still running the V1 client (unless you are running both). So keep running the V1 client until you have sent me your V1 coins. Then download the V2 and PM me your V2 address and I'll get you your coins ASAP back to you.

Any questions about this?

The Presstab block explorer is still on the V1 chain so you can see your transactions there. It suggests that the total supply of V1 is 100,134,831 MOJO and we have exchanged 93,348,328 MOJO so there may still be around 6,786,503 MOJOV1 floating around somewhere.

I will keep this open for 2-3 weeks and I know there are still V1 nodes running. so PM me and I'll deal as soon as I can.

Now I see this in OP..

Coin swap has been complete from V1MOJO to V2MOJO

So what up with this? EBK1000, I have sent you a PM regarding the swap just before you temporarily disappeared from the forum. No answer received. Then I have PM-ed you once more lately, still nothing... I had an impression this is a solid project, and I was one of the initial investors. Was that impression wrong?

I was a believer in you, and expressed my confidence in even when most folks were thinking you've gone for good. Because of this same reason, I was not checking the forum every day, having some confidence you'll answer when you come back, and hoping to get email notification in form of an answer. Should we really check forums every day to catch those swaps? So what? Are my MOJO's lost forever...? There was too much trust from my side..?  

[FogHorn_LegHorn]

Manual swap from MOJO V1 to V2 is now open, sorry about the delay.
If you have old MOJO V1 coins that you did not manage to swap for V2 coins, then PM me with the amount. I know you may have sent a PM before but I get so many so that they may be lost sometimes. If you PM me with the amount you wanna swap and I'll give you a V1 address to send to.

I guess that if you haven't swapped you're still running the V1 client (unless you are running both). So keep running the V1 client until you have sent me your V1 coins. Then download the V2 and PM me your V2 address and I'll get you your coins ASAP back to you.

Any questions about this?

The Presstab block explorer is still on the V1 chain so you can see your transactions there. It suggests that the total supply of V1 is 100,134,831 MOJO and we have exchanged 93,348,328 MOJO so there may still be around 6,786,503 MOJOV1 floating around somewhere.

I will keep this open for 2-3 weeks and I know there are still V1 nodes running. so PM me and I'll deal as soon as I can.

Now I see this in OP..

Coin swap has been complete from V1MOJO to V2MOJO

So what up with this? EBK1000, I have sent you a PM regarding the swap just before you temporarily disappeared from the forum. No answer received. Then I have PM-ed you once more lately, still nothing... I had an impression this is a solid project, and I was one of the initial investors. Was that impression wrong?

I was a believer in you, and expressed my confidence in even when most folks were thinking you've gone for good. Because of this same reason, I was not checking the forum every day, having some confidence you'll answer when you come back, and hoping to get email notification in form of an answer. Should we really check forums every day to catch those swaps? So what? Are my MOJO's lost forever...? There was too much trust from my side..?  

Relax man, he prolly has like 200 pm's per day. I highly doubt he didn't respond on purpose, just overlooked. He is quite busy getting things back in order. So what is your exact question? You still need to swap out your V1 Mojo for V2 Mojo? If so then no problem, he has stated NUMEROUS times that he will do it. Just because he doesn't do it in the exact second you want him too, doesn't mean shit. Patience man. All is well. You will be taken care of. Nothing is lost. RELAX!

[CryptoHobo]

Staking seems to be working now, in principle.
However, it appears that the staking amount is not right.

5,000 MOJO, coin age 3 weeks - earnings: 1.11 MOJO
https://chainz.cryptoid.info/mojo/address.dws?MAkVtpysByXLEQSYoRuFuaitgGN93XAcxD.htm

319,000 MOJO, coin age nearly 3 weeks - earnings: 1.19 MOJO
https://chainz.cryptoid.info/mojo/address.dws?MA8o6ZSKaAHwrAVqqwQXkXhKZzJeWQpC8Q.htm

It seems that staking only works well for small amounts of MOJO (up to 5,000).

Is it possible that the "overflow bug" still exists, which was reported / supposed here weeks ago?

yep still buggy as fuck, I'm currently awaiting an announcement to switch to v3 

[Limx Dev]

Staking seems to be working now, in principle.
However, it appears that the staking amount is not right.

5,000 MOJO, coin age 3 weeks - earnings: 1.11 MOJO
https://chainz.cryptoid.info/mojo/address.dws?MAkVtpysByXLEQSYoRuFuaitgGN93XAcxD.htm

319,000 MOJO, coin age nearly 3 weeks - earnings: 1.19 MOJO
https://chainz.cryptoid.info/mojo/address.dws?MA8o6ZSKaAHwrAVqqwQXkXhKZzJeWQpC8Q.htm

It seems that staking only works well for small amounts of MOJO (up to 5,000).

Is it possible that the "overflow bug" still exists, which was reported / supposed here weeks ago?

The POS Reward is currently complete wrong. Mojo V2 pays ~1,5% (should be:15%) but your 1,19 Mojo for 319K is a mystery.
At 1.5% takes about 200 Mojo come as a result (319K 3 weeks). Your earnings for the 5000 Mojo are correct (1,5%). (Amount /2 =0,75%)
Can you send me your debug.log?

[GoldenEye]

Staking seems to be working now, in principle.
However, it appears that the staking amount is not right.

5,000 MOJO, coin age 3 weeks - earnings: 1.11 MOJO
https://chainz.cryptoid.info/mojo/address.dws?MAkVtpysByXLEQSYoRuFuaitgGN93XAcxD.htm

319,000 MOJO, coin age nearly 3 weeks - earnings: 1.19 MOJO
https://chainz.cryptoid.info/mojo/address.dws?MA8o6ZSKaAHwrAVqqwQXkXhKZzJeWQpC8Q.htm

It seems that staking only works well for small amounts of MOJO (up to 5,000).

Is it possible that the "overflow bug" still exists, which was reported / supposed here weeks ago?

The POS Reward is currently complete wrong. Mojo V2 pays ~1,5% (should be:15%) but your 1,19 Mojo for 319K is a mystery.
At 1.5% takes about 200 Mojo come as a result (319K 3 weeks). Your earnings for the 5000 Mojo are correct (1,5%). (Amount /2 =0,75%)
Can you send me your debug.log?

I assume, there is still the uint64 overflow bug:
https://bitcointalk.org/index.php?topic=1366963.msg14459322;topicseen#msg14459322

which should be fixed with MojoV2
https://bitcointalk.org/index.php?topic=1366963.msg14732650#msg14732650

By the way, the last POS reward for the 5k account was ok:
https://chainz.cryptoid.info/mojo/address.dws?MAkVtpysByXLEQSYoRuFuaitgGN93XAcxD.htm
1.24 MOJO per 29 hours => 375 MOJO per year => 7.5% => OK

I've found staking is working  for accounts with max. 5k MOJO and coinage about 1 day.
Seems to be an overflow...