ethminer-0.9.41-genoil-1.1

[rednoW]

Dear Genoil.

Why this very usefull option doesn't work on your fork?
ethminer --list-devices

Try using:  ethminer -G --list-devices and see if that helps.

Ohh, silly me )) Thank you very much!

[sp_]

Download the latest 1.0.6 release. It crashes with the parameter -E old if there are no Dag files in the folder. (first run) on a new computer)

[Genoil]

Download the latest 1.0.6 release. It crashes with the parameter -E old if there are no Dag files in the folder. (first run) on a new computer)

Hmm strange. Tried to reproduce on both default and custom directory (both empty) and it just starts generating DAG files..

[Ayers]

the op is not reporting it, what the new release add to this miner? taling about the 10.6

[sp_]

Download the latest 1.0.6 release. It crashes with the parameter -E old if there are no Dag files in the folder. (first run) on a new computer)

Hmm strange. Tried to reproduce on both default and custom directory (both empty) and it just starts generating DAG files..

I get the same crash when I have 2 instances of the miner, one card on opencl and one card on cuda. and they share the dag file. To fix it I have to use 2 seperate folders for the dag files.

[Genoil]

Download the latest 1.0.6 release. It crashes with the parameter -E old if there are no Dag files in the folder. (first run) on a new computer)

Hmm strange. Tried to reproduce on both default and custom directory (both empty) and it just starts generating DAG files..

I get the same crash when I have 2 instances of the miner, one card on opencl and one card on cuda. and they share the dag file. To fix it I have to use 2 seperate folders for the dag files.

try downloading the bin again. i think i pushed the wrong exe ..or not  

i know what it is now. trying to open non-existant directory. thanks for reporting. will fix today.

the separate folders for DAG are still needed for two instances.

[Dolmater]

How do I use the -FF option?

I used the -S eu1.ethpool.org:3333  and -FF http://127.0.0.1:8080, it does not work.

[Genoil]

How do I use the -FF option?

I used the -S eu1.ethpool.org:3333  and -FF http://127.0.0.1:8080, it does not work.

failover is only for getwork protocol, not stratum. So you can combine -F with -FF, but not -S with -FF.

The feature was built for a donator who wanted to use two stratum proxies, so if the proxy crashes, you can still continue on the other.

I'll add -SF (stratum failover) in a future release.

[user356546]

I just upgraded to 1.0.6 and for the life of me I cannot get nanopool or suprnova to show my worker hashing. Using Win 7, R9 280x, and the following config:

ethminer --farm-recheck 300 -G -F http://eth-us.suprnova.cc:3000/user.worker1/50 --cl-global-work 16384 --cl-local-work 128

My GPU usage shows as 100% but in the output, after it shows "workloop 1" it always shows 0 H/s for the first .5 /s but then begins to ramp up. It never did this before. Any ideas what is going on?

[Genoil]

I just upgraded to 1.0.6 and for the life of me I cannot get nanopool or suprnova to show my worker hashing. Using Win 7, R9 280x, and the following config:

ethminer --farm-recheck 300 -G -F http://eth-us.suprnova.cc:3000/user.worker1/50 --cl-global-work 16384 --cl-local-work 128

My GPU usage shows as 100% but in the output, after it shows "workloop 1" it always shows 0 H/s for the first .5 /s but then begins to ramp up. It never did this before. Any ideas what is going on?

From which version did you upgrade?

[user356546]

From which version did you upgrade?

0.9.23

[tracercho]

Guys, did someone tried to compile the miner with static linking to the libraries? I'm working on windows with VS 2013 and only with changing the Code Generation to 'Multi-threaded' I receive a lot of errors. I guess i have to recompile all of the dependant libraries but is there an easy way to do this?

Code:

3>jsonrpccpp-common.lib(exception.obj) : error LNK2038: mismatch detected for 'RuntimeLibrary': value 'MD_DynamicRelease' doesn't match value 'MT_StaticRelease' in main.obj
3>jsonrpccpp-common.lib(errors.obj) : error LNK2038: mismatch detected for 'RuntimeLibrary': value 'MD_DynamicRelease' doesn't match value 'MT_StaticRelease' in main.obj
3>jsonrpccpp-client.lib(httpclient.obj) : error LNK2038: mismatch detected for 'RuntimeLibrary': value 'MD_DynamicRelease' doesn't match value 'MT_StaticRelease' in main.obj
3>jsonrpccpp-client.lib(client.obj) : error LNK2038: mismatch detected for 'RuntimeLibrary': value 'MD_DynamicRelease' doesn't match value 'MT_StaticRelease' in main.obj
3>jsonrpccpp-client.lib(batchcall.obj) : error LNK2038: mismatch detected for 'RuntimeLibrary': value 'MD_DynamicRelease' doesn't match value 'MT_StaticRelease' in main.obj
3>jsonrpccpp-client.lib(batchresponse.obj) : error LNK2038: mismatch detected for 'RuntimeLibrary': value 'MD_DynamicRelease' doesn't match value 'MT_StaticRelease' in main.obj
3>jsonrpccpp-client.lib(rpcprotocolclient.obj) : error LNK2038: mismatch detected for 'RuntimeLibrary': value 'MD_DynamicRelease' doesn't match value 'MT_StaticRelease' in main.obj
3>ethash-cuda.lib(ethash-cuda_generated_ethash_cuda_miner_kernel.cu.obj) : error LNK2038: mismatch detected for 'RuntimeLibrary': value 'MD_DynamicRelease' doesn't match value 'MT_StaticRelease' in main.obj
3>cryptopp.lib(cryptlib.obj) : error LNK2038: mismatch detected for 'RuntimeLibrary': value 'MD_DynamicRelease' doesn't match value 'MT_StaticRelease' in main.obj
3>cryptopp.lib(sha3.obj) : error LNK2038: mismatch detected for 'RuntimeLibrary': value 'MD_DynamicRelease' doesn't match value 'MT_StaticRelease' in main.obj
3>cryptopp.lib(misc.obj) : error LNK2038: mismatch detected for 'RuntimeLibrary': value 'MD_DynamicRelease' doesn't match value 'MT_StaticRelease' in main.obj
3>cryptopp.lib(queue.obj) : error LNK2038: mismatch detected for 'RuntimeLibrary': value 'MD_DynamicRelease' doesn't match value 'MT_StaticRelease' in main.obj
3>cryptopp.lib(algparam.obj) : error LNK2038: mismatch detected for 'RuntimeLibrary': value 'MD_DynamicRelease' doesn't match value 'MT_StaticRelease' in main.obj
3>cryptopp.lib(filters.obj) : error LNK2038: mismatch detected for 'RuntimeLibrary': value 'MD_DynamicRelease' doesn't match value 'MT_StaticRelease' in main.obj
3>cryptopp.lib(fips140.obj) : error LNK2038: mismatch detected for 'RuntimeLibrary': value 'MD_DynamicRelease' doesn't match value 'MT_StaticRelease' in main.obj
3>cryptopp.lib(mqueue.obj) : error LNK2038: mismatch detected for 'RuntimeLibrary': value 'MD_DynamicRelease' doesn't match value 'MT_StaticRelease' in main.obj
3>libboost_random-vc120-mt-1_55.lib(random_device.obj) : error LNK2038: mismatch detected for 'RuntimeLibrary': value 'MD_DynamicRelease' doesn't match value 'MT_StaticRelease' in main.obj
3>jsoncpp.lib(json_value.obj) : error LNK2038: mismatch detected for 'RuntimeLibrary': value 'MD_DynamicRelease' doesn't match value 'MT_StaticRelease' in main.obj
3>jsoncpp.lib(json_reader.obj) : error LNK2038: mismatch detected for 'RuntimeLibrary': value 'MD_DynamicRelease' doesn't match value 'MT_StaticRelease' in main.obj
3>jsoncpp.lib(json_writer.obj) : error LNK2038: mismatch detected for 'RuntimeLibrary': value 'MD_DynamicRelease' doesn't match value 'MT_StaticRelease' in main.obj
3>libboost_thread-vc120-mt-1_55.lib(thread.obj) : error LNK2038: mismatch detected for 'RuntimeLibrary': value 'MD_DynamicRelease' doesn't match value 'MT_StaticRelease' in main.obj
3>libboost_thread-vc120-mt-1_55.lib(tss_pe.obj) : error LNK2038: mismatch detected for 'RuntimeLibrary': value 'MD_DynamicRelease' doesn't match value 'MT_StaticRelease' in main.obj
3>libboost_system-vc120-mt-1_55.lib(error_code.obj) : error LNK2038: mismatch detected for 'RuntimeLibrary': value 'MD_DynamicRelease' doesn't match value 'MT_StaticRelease' in main.obj
3>LINK : fatal error LNK1104: cannot open file 'libboost_random-vc120-mt-s-1_55.lib'

[Genoil]

From which version did you upgrade?

0.9.23

I'll do some testing against the pools you are mentioning. Meanwhile, I suggest you just stick to 0.9.23 if it gives you better results

I noticed the longer startup times as well. Not sure where that's coming from, yet.

[user356546]

From which version did you upgrade?

0.9.23

I'll do some testing against the pools you are mentioning. Meanwhile, I suggest you just stick to 0.9.23 if it gives you better results

I noticed the longer startup times as well. Not sure where that's coming from, yet.

Thanks for the help; let me know if you need any more information.

[user356546]

0.9.23

I'll do some testing against the pools you are mentioning. Meanwhile, I suggest you just stick to 0.9.23 if it gives you better results

I noticed the longer startup times as well. Not sure where that's coming from, yet.

Thanks for the help; let me know if you need any more information.

Sorry, I just noticed that it was 0.9.40. Checked the running version on a different PC and thought they were the same. The .40 release is the one with the 280x that is giving me the trouble.

[malekbaba]

how do i use the new version ? I am on win 7 64bit. Please give me the download link for windows and tell me how to run the miner , please

[user356546]

how do i use the new version ? I am on win 7 64bit. Please give me the download link for windows and tell me how to run the miner , please

https://github.com/Genoil/cpp-ethereum/tree/master/releases and click on the version that you want; once there click "Raw" an it will download. Unzip and go; if you have not used Ethminer before I would suggest this getting started guide https://eth.suprnova.cc/index.php?page=gettingstarted. From there you can take a look at the forums for additional guides on how to tweak the mining.

[Ultrabat]

How do I use the -FF option?

I used the -S eu1.ethpool.org:3333  and -FF http://127.0.0.1:8080, it does not work.

failover is only for getwork protocol, not stratum. So you can combine -F with -FF, but not -S with -FF.

The feature was built for a donator who wanted to use two stratum proxies, so if the proxy crashes, you can still continue on the other.

I'll add -SF (stratum failover) in a future release.

Do you mean I have two stratum proxy in my local network, I can point to those two proxy, but not the pools remotely?

Can we have three instead of two proxy?

[Ayers]

how do i use the new version ? I am on win 7 64bit. Please give me the download link for windows and tell me how to run the miner , please

https://github.com/Genoil/cpp-ethereum/tree/master/releases and click on the version that you want; once there click "Raw" an it will download. Unzip and go; if you have not used Ethminer before I would suggest this getting started guide https://eth.suprnova.cc/index.php?page=gettingstarted. From there you can take a look at the forums for additional guides on how to tweak the mining.

how to download this https://github.com/Genoil/cpp-ethereum/commit/057c7376fa4b0c380d5aab68d847389e5b4d323a, your download only lead me to the previous version

[malekbaba]

new miner really does not improve the hashing. I am not programmer so, as a point of view of a miner, previous versions are not slower or faster.