ethminer-0.9.41-genoil-1.1

[SS2006]

Re: unstable stratum; try 1.0.7 beta in 107 branch release folder.
Re: mine on card 2 --cuda-devices 1, or mine 24/7 using --cuda-gridsize 2048

wierd, cuda devices 1, is still using both cards, so that didnt work
also using the --cuda-gridsize 2048 in the file after 'ethminer -g', made the .bat no longer open. so that also didnt work

[scryptr]

Re: unstable stratum; try 1.0.7 beta in 107 branch release folder.
Re: mine on card 2 --cuda-devices 1, or mine 24/7 using --cuda-gridsize 2048

wierd, cuda devices 1, is still using both cards, so that didnt work
also using the --cuda-gridsize 2048 in the file after 'ethminer -g', made the .bat no longer open. so that also didnt work

ARE YOU MINING WITH CUDA GPUS? --

Try running with "ethminer -U", as "-G" indicates openCL cards, or AMD graphics.       --scryptr

[Genoil]

Re: unstable stratum; try 1.0.7 beta in 107 branch release folder.
Re: mine on card 2 --cuda-devices 1, or mine 24/7 using --cuda-gridsize 2048

wierd, cuda devices 1, is still using both cards, so that didnt work
also using the --cuda-gridsize 2048 in the file after 'ethminer -g', made the .bat no longer open. so that also didnt work

Oh sorry should be ethminer.exe -U --cuda-grid-size 2048 or ethminer.exe -U --cuda-devices 1

The fist one will mine on both your cards with lower intensity so you can still browse, use office, etc. The second on mines with higher intensity on card 1. card 0 is your desktop card. You can play with the value of grid size until you are satisfied with desktop vs mining speed.

[Dowper]

Hello, when I use this command: "-R E:\Crypto\DagETH", the CPU load is 50%. When I remove it, it's 0,5%. The problem is that my drive C is almost full and I want to change the DAG folder in drive E, but this 50% CPU load is a big problem.

[davembg]

Hello, when I use this command: "-R E:\Crypto\DagETH", the CPU load is 50%. When I remove it, it's 0,5%. The problem is that my drive C is almost full and I want to change the DAG folder in drive E, but this 50% CPU load is a big problem.

What CPU are you using?

[PcChip]

FYI on my 980 Ti on Windows with two 144hz monitors, I have to run -U --cl-global-work 512  , anything higher and scrolling isn't smooth on webpages.  I get ~19 MH/s with this setting.

[SS2006]

Re: unstable stratum; try 1.0.7 beta in 107 branch release folder.
Re: mine on card 2 --cuda-devices 1, or mine 24/7 using --cuda-gridsize 2048

wierd, cuda devices 1, is still using both cards, so that didnt work
also using the --cuda-gridsize 2048 in the file after 'ethminer -g', made the .bat no longer open. so that also didnt work

ARE YOU MINING WITH CUDA GPUS? --

Try running with "ethminer -U", as "-G" indicates openCL cards, or AMD graphics.       --scryptr

Thanks a bunch, so I'm using Two GTX 980s on Windows 10, with the 347.52 driver
when I use -U, i get "cuda driver version is insufficient for cuda runtime version"
I've tried installing CUDA 6.5 and VS2013, but same issue. I'm assuming since I'm using the 347.52 driver, I need the ethminer compiled using a cuda version that was used at the 347.52 driver time, which I'm thinking is Cuda 6.5. How to compile the ethminer with 6.5 is beyond me, but I'll search forums to see if some kind soul has already done this. The current version I'm using (1.0.7 beta) is from cryptomining blog which i presume was compiled with the latest cuda version

[scryptr]

Re: unstable stratum; try 1.0.7 beta in 107 branch release folder.
Re: mine on card 2 --cuda-devices 1, or mine 24/7 using --cuda-gridsize 2048

wierd, cuda devices 1, is still using both cards, so that didnt work
also using the --cuda-gridsize 2048 in the file after 'ethminer -g', made the .bat no longer open. so that also didnt work

ARE YOU MINING WITH CUDA GPUS? --

Try running with "ethminer -U", as "-G" indicates openCL cards, or AMD graphics.       --scryptr

Thanks a bunch, so I'm using Two GTX 980s on Windows 10, with the 347.52 driver
when I use -U, i get "cuda driver version is insufficient for cuda runtime version"

A LOT OF AMD USERS POSTING--

Sorry, no offense meant.  My suggestion is upgrading to driver 352 or better.  However, there is a whole ball of wax with Win 10 that I have avoided by sticking to Win 7 x64.

One thing, I had a hang-up with my last nVidia driver update (361.xx).  I just re-installed and upgraded to v364.72, and a lot of problems with mining software just disappeared.

I am definitely not a final authority.  A good driver install may be what you need.  I don't know what version you need, the Win 10 VooDoo i simply avoided.  CUDA ToolKit v7.5 comes with driver 352.xx.

Good luck mining...       --scryptr

[SS2006]

ya, problem is anything other than that driver (347.52), and hash rates plummet on windows 10. id love to upgrade it to latest driver so I can game properly
Any potention solution you see Genoil for Windows 10 mining ever?, or should I just run a windows 7 boot

[Genoil]

Hello, when I use this command: "-R E:\Crypto\DagETH", the CPU load is 50%. When I remove it, it's 0,5%. The problem is that my drive C is almost full and I want to change the DAG folder in drive E, but this 50% CPU load is a big problem.

The cause for this may be that your new DAG location does not have the next DAG ready, so your CPU is working to build it. Try moving the two largest DAG files into the new location and check again.

ya, problem is anything other than that driver (347.52), and hash rates plummet on windows 10. id love to upgrade it to latest driver so I can game properly
Any potention solution you see Genoil for Windows 10 mining ever?, or should I just run a windows 7 boot

No unless MS/NVidia change their driver architecture. I'll upload an older CUDA 6.5 build today.

[SS2006]

Hello, when I use this command: "-R E:\Crypto\DagETH", the CPU load is 50%. When I remove it, it's 0,5%. The problem is that my drive C is almost full and I want to change the DAG folder in drive E, but this 50% CPU load is a big problem.

The cause for this may be that your new DAG location does not have the next DAG ready, so your CPU is working to build it. Try moving the two largest DAG files into the new location and check again.

ya, problem is anything other than that driver (347.52), and hash rates plummet on windows 10. id love to upgrade it to latest driver so I can game properly
Any potention solution you see Genoil for Windows 10 mining ever?, or should I just run a windows 7 boot

No unless MS/NVidia change their driver architecture. I'll upload an older CUDA 6.5 build today.

That's awesome. Thanks a lot boss

[calculatorduck]

I have a GTX 760 and interestingly enough the build with CUDA 6.5 and the 347 driver have not helped me at all on Win10. It seems to work for the 9xx series cards, but not the 7xx. Not sure why.

[fenomenhaa]

What's the hashrate of 970's with latest realase? We should run with cuda or open cl?

[Dowper]

Hello, when I use this command: "-R E:\Crypto\DagETH", the CPU load is 50%. When I remove it, it's 0,5%. The problem is that my drive C is almost full and I want to change the DAG folder in drive E, but this 50% CPU load is a big problem.

What CPU are you using?

AMD Phenom II X2 560 @ 3.6GHz.

[scryptr]

What's the hashrate of 970's with latest realase? We should run with cuda or open cl?

19-20 MH/s--

Depending on clock rates, etc, a GTX 970 will meet or beat an AMD 280/380 card and use less energy.       --scryptr

[Vaccinus]

What's the hashrate of 970's with latest realase? We should run with cuda or open cl?

19-20 MH/s--

Depending on clock rates, etc, a GTX 970 will meet or beat an AMD 280/380 card and use less energy.       --scryptr

i've reached 66 mega with 500w for 3x 970, pretty good, better than amd

[crazyearner]

Nice to see this now supports custom DAG file location was bugging me as filling main drive up with storage now can use my main 1TB drive for this. Loving the updates keep em coming. Maybe some more updates maybe to have a bit of a layout or status that it has on cgminer like total submitted shares total hash rejected and no millions of data flying by maybe 2 or 3 line and have option to send to background

[Fademigo]

What's the hashrate of 970's with latest realase? We should run with cuda or open cl?

19-20 MH/s--

Depending on clock rates, etc, a GTX 970 will meet or beat an AMD 280/380 card and use less energy.       --scryptr

That is right. But your are comparing a new GPU with 3 year old GPU. 970 is much more expensive.

[spiete]

I have SAPPHIRE NITRO Radeon R9 380X 4G D5.

I use ethminer-0.9.41-genoil-1.0.4b3

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
C:\Mine\ethminer107\ethminer.exe --farm-recheck 2000 -G -F http://127.0.0.1:8080/dw1 --cl-local-work 256 --cl-global-work 16384

And i have 20.9 m/s.

What settings can i change to improve that result?

[Genoil]

20.9 is pretty ok for a Tonga GPU