ethminer-0.9.41-genoil-1.1

[QuintLeo]

Curiously, when mining on ethermine, is there a warm up period before you start making what you should for your submitted shares? Like you have to be on the pool for two hours before you earn your optimal income rate.

 Yes. Ethermine is PPLNS, and I think 2 hours is their window.

[moaddip]

1.0.8, + 4x 970 CPU loaded on 80%, and a miner does not work, very slowly.

1-2-3x    970   works fine.

cpu amd 2 cores, nvidia driver last.

 

what is missing?

how much RAM you got there and which OS? btw i'm probably not the most experienced here with just 1 970. there are others here who've got big nvidia rigs

8gb + 5 swap

cpu load 83% constantly, waiting for hour

[Ayers]

Ok let's say I did NOT just get access to a Win7-x64 box with NO GTX1080 and CUDA 8.0RC NOT installed and I didn't succesfully build my 1.0.8 ethminer fork on it.

I didn't clock 19.6MH in default benchmark mode at ~140W and it sure as hell didn't clock a whopping 650KH/s in actual mining mode against the current DAG.

This card trashes TLB like GM107  

But...there is hope. I can't disclose what I just heard from my source because the word 'might' in his statement leaves me too uncertain. But if it's true everything simply changes.

Everything simply changes for Maxwell cards too like the 750ti? :-)  And when would this "might" possibly happen?  :-D  I am just glad your NOT doing research with NO GTX1080... Just wouldn't be prudent! LOL

Apparently Pascal supports large TLB page sizes. I don't know if Maxwell does. It's not something Nvidia can simply enable in CUDA 8. In Linux perhaps, Windows needs a new WDDM release.

can this be fixed to have good hashrate on new pascal gpu?

[adamvp]

Code:

ethminer.exe -C -S eth-eu.dwarfpool.com:80/0Myxa2541adressss/worker

doesn't work

no it doesn't. my fork doesn't support dwarf stratum. a. their stratum is not stratum and b. their faq says my stratum is buggy while their implementation is simply out of spec.

i will support it if i get paid to do it 

where can I find lists of compatibile pools?
Nanopool doesn't work too..

[Pustul]

Genoil, do you think the new 1080 and 1070 will hash as fast on a win10 rig as a linux or win7 one? It will be nice to get my computer back 

[Genoil]

Genoil, do you think the new 1080 and 1070 will hash as fast on a win10 rig as a linux or win7 one? It will be nice to get my computer back 

You mean as slow?

[davembg]

Code:

ethminer.exe -C -S eth-eu.dwarfpool.com:80/0Myxa2541adressss/worker

doesn't work

no it doesn't. my fork doesn't support dwarf stratum. a. their stratum is not stratum and b. their faq says my stratum is buggy while their implementation is simply out of spec.

i will support it if i get paid to do it 

I hear you, Genoil. NO pools have standard "stratum" support, and the vardiff is also flakey.

[Genoil]

Code:

ethminer.exe -C -S eth-eu.dwarfpool.com:80/0Myxa2541adressss/worker

doesn't work

no it doesn't. my fork doesn't support dwarf stratum. a. their stratum is not stratum and b. their faq says my stratum is buggy while their implementation is simply out of spec.

i will support it if i get paid to do it  

I hear you, Genoil. NO pools have standard "stratum" support, and the vardiff is also flakey.

Coinotron, ethpool/ethermine, miningpoolhub are pretty good. Coinmine.pl as well although there's a little hack in my code to support it.

[malekbaba]

which driver is best for 7950 ? Which pool is most profitable for genoil's version of miner? please help me

[adamvp]

Sorry if such question was answered, but how should failover stratum look like?

ethminer.exe -G -S pool1 ... and what next?...

[smaxz]

my ethminer used to show my hashrate, then it would show = double my rate /s

now after an upgrade its showing = half my rate / 0.5s

have you removed some dual channel mining abilities?

[Ayers]

which driver is best for 7950 ? Which pool is most profitable for genoil's version of miner? please help me

dwarf is the most profitable for me almost the same earning of the calculator, very good estimate and profit

[adamvp]

which driver is best for 7950 ? Which pool is most profitable for genoil's version of miner? please help me

dwarf is the most profitable for me almost the same earning of the calculator, very good estimate and profit

about what calculator do you speak?
I have (without proxy because proxy hangs on my rig) significally less earnings (with 72mhs I get only 0,67 instead of 0,81 like according to calculator from etherscan)

[Vaccinus]

which driver is best for 7950 ? Which pool is most profitable for genoil's version of miner? please help me

dwarf is the most profitable for me almost the same earning of the calculator, very good estimate and profit

about what calculator do you speak?
I have (without proxy because proxy hangs on my rig) significally less earnings (with 72mhs I get only 0,67 instead of 0,81 like according to calculator from etherscan)

i think he is talking about any calculator, i'm mining with 66mh and getting 0.7 per day or slightly more, with the stratum

[MrOneTwo]

Hi,
I have a problem with the compilation version 1.0.8 on Ubuntu 14.04. After copying the command
git clone https://github.com/Genoil/cpp-ethereum what you need to do next in order to properly compile the program?
Thanks in advance for your help

[BitMinerN8]

Hi,
I have a problem with the compilation version 1.0.8 on Ubuntu 14.04. After copying the command
git clone https://github.com/Genoil/cpp-ethereum what you need to do next in order to properly compile the program?
Thanks in advance for your help

If you click on that link above in your post and scroll all the way to the bottom, there is a heading Building on Ubuntu. Is that what you are looking for? I've used those steps on 14.04 for both AMD/nVidia and they work great.

[ComaWombat]

I managed to build 1.0.8 on Ubuntu 16.04 but I had to make a directory called "CL" in the main directory and copy "cl.hpp" file from my old 1.0.7 build folder in there. Looks like that folder and file are missing from github.

[Genoil]

I managed to build 1.0.8 on Ubuntu 16.04 but I had to make a directory called "CL" in the main directory and copy "cl.hpp" file from my old 1.0.7 build folder in there. Looks like that folder and file are missing from github.

I removed it from the repo because on Windows it's loaded from external dependencies. Shouldn't it be part of the OpenCL ICD?

[adamvp]

which driver is best for 7950 ? Which pool is most profitable for genoil's version of miner? please help me

dwarf is the most profitable for me almost the same earning of the calculator, very good estimate and profit

about what calculator do you speak?
I have (without proxy because proxy hangs on my rig) significally less earnings (with 72mhs I get only 0,67 instead of 0,81 like according to calculator from etherscan)

i think he is talking about any calculator, i'm mining with 66mh and getting 0.7 per day or slightly more, with the stratum

With external proxy?   Now  I am trying in  coinmine  by using - S flag but it is going to same earnings rate  as in  dwarfpool  by get work...   And please  answer me how to make failover stratum pool  in command cause my attempts was failed..

[PontiacGTX]

anyone using an AMD card, has GPU core clocks spikes if the card has boost? is there a way to tell the miner to use a certain frequency?