Amph
Legendary
Offline
Activity: 3248
Merit: 1070
|
|
June 21, 2016, 11:35:31 AM |
|
I'm getting close to stamping my Hawaii code with a release version - I've completely rewritten the entire ethash kernel neatly and cleanly, on top of eliminating ALL LDS usage and gaining a wave in flight.
Then, I guess, porting to Tonga/Fiji... Stupid new memory addressing.
Anyways, showing high 8 percent to low 9 percent increase on 290X.
Hi, do you plan to share it? I plan to sell it, yeah. Might make an announcement or something - not sure how to do it. If someone's willing to pay, I can hurry up with Fiji, too. how about the hashrate on neoscrypt and lyrav2 on amd with your best miner version? what would be the price exactly? but i know already that it will be expensive...maybe a small donation from many people would help I haven't worked on those in a while - since I sold it to NiceHash - but I have a feeling at least NeoScrypt can get quite a bit better... Using some of GCN's lesser known abilities would probably do it, but it's a real pain for EVERY different chip. mmh ok...are you including a sib perf increase and an optimized spreadcoin for amd also? I think I can dig up copies of SIB and... I might have SPR somewhere. just asking, because my priority is not having a limited miner, i want to be able to mine everything if one algo sink into the ground sort of an ultimate miner is always good to have
|
|
|
|
Amph
Legendary
Offline
Activity: 3248
Merit: 1070
|
|
June 21, 2016, 11:39:11 AM |
|
i'm with 970 right now but...i'm waiting for the new amd to come out before deciding...
i guess i might go with the new amd, if support for nvidia drop out, unless you will focus on nvidia also, sp is retiring he say....
btw about sib, is optimized right, what is the hashrate on a 390 for example?
|
|
|
|
Amph
Legendary
Offline
Activity: 3248
Merit: 1070
|
|
June 21, 2016, 12:17:34 PM |
|
I'm getting close to stamping my Hawaii code with a release version - I've completely rewritten the entire ethash kernel neatly and cleanly, on top of eliminating ALL LDS usage and gaining a wave in flight.
Then, I guess, porting to Tonga/Fiji... Stupid new memory addressing.
Anyways, showing high 8 percent to low 9 percent increase on 290X.
Hi, do you plan to share it? I plan to sell it, yeah. Might make an announcement or something - not sure how to do it. If someone's willing to pay, I can hurry up with Fiji, too. how about the hashrate on neoscrypt and lyrav2 on amd with your best miner version? what would be the price exactly? but i know already that it will be expensive...maybe a small donation from many people would help I haven't worked on those in a while - since I sold it to NiceHash - but I have a feeling at least NeoScrypt can get quite a bit better... Using some of GCN's lesser known abilities would probably do it, but it's a real pain for EVERY different chip. mmh ok...are you including a sib perf increase and an optimized spreadcoin for amd also? I think I can dig up copies of SIB and... I might have SPR somewhere. just asking, because my priority is not having a limited miner, i want to be able to mine everything if one algo sink into the ground sort of an ultimate miner is always good to have About SPR, though, I've got a record from when I did it (NSFW): https://ottrbutt.com/miner/spreadwolf-12172015.pnggood hashrate on that 290, better than a 970 with the sp private, is this miner only private?
|
|
|
|
jiggytom
Legendary
Offline
Activity: 1068
Merit: 1020
|
|
June 21, 2016, 01:06:17 PM |
|
I'm getting close to stamping my Hawaii code with a release version - I've completely rewritten the entire ethash kernel neatly and cleanly, on top of eliminating ALL LDS usage and gaining a wave in flight.
Then, I guess, porting to Tonga/Fiji... Stupid new memory addressing.
Anyways, showing high 8 percent to low 9 percent increase on 290X.
Hi, do you plan to share it? I plan to sell it, yeah. Might make an announcement or something - not sure how to do it. If someone's willing to pay, I can hurry up with Fiji, too. how about the hashrate on neoscrypt and lyrav2 on amd with your best miner version? what would be the price exactly? but i know already that it will be expensive...maybe a small donation from many people would help I haven't worked on those in a while - since I sold it to NiceHash - but I have a feeling at least NeoScrypt can get quite a bit better... Using some of GCN's lesser known abilities would probably do it, but it's a real pain for EVERY different chip. mmh ok...are you including a sib perf increase and an optimized spreadcoin for amd also? I think I can dig up copies of SIB and... I might have SPR somewhere. just asking, because my priority is not having a limited miner, i want to be able to mine everything if one algo sink into the ground sort of an ultimate miner is always good to have About SPR, though, I've got a record from when I did it (NSFW): https://ottrbutt.com/miner/spreadwolf-12172015.pnggood hashrate on that 290, better than a 970 with the sp private, is this miner only private? Yup. Would that miner you have work on Pascal too? Have 1070s and a 1080
|
BTC: 174MGp3R5prNbuen31Kx5G5XuyuAXu9jye LBC: bWYN8NXGKWsgEAd6tQnJ5YRo2Z4r6PjxBH
|
|
|
Amph
Legendary
Offline
Activity: 3248
Merit: 1070
|
|
June 21, 2016, 02:37:38 PM |
|
i was wondering it's possible to integrate the ethereum miner in a ultimate miner with all the other algo together? or something is preventing this?
|
|
|
|
kantxcape
Newbie
Offline
Activity: 3
Merit: 0
|
|
June 21, 2016, 04:02:50 PM |
|
Wolf when can you beta test your miner? I have two 290 that im using to mine ATM.
|
|
|
|
bensam1231
Legendary
Offline
Activity: 1764
Merit: 1024
|
|
June 21, 2016, 06:01:57 PM |
|
Holy shit, wolf is selling to normal plebs?!?! *gasp* What has the world come to?
|
I buy private Nvidia miners. Send information and/or inquiries to my PM box.
|
|
|
crazyearner
Legendary
Offline
Activity: 1820
Merit: 1001
|
|
June 21, 2016, 06:58:01 PM |
|
string bug is now fixed in 1.1.6
Perfect was having this bug on my 280x cards mining and would not work. Newer cards tho where fine tho but some old ones where broke not working on pool. Do you have any updates to get hash speeds like in your older versions with dag generation in as seems newer you go on your versions more hash lost. Are you sure the old versions hash at the same speed today? Because GCN 1.0 cards like your 280X get slower with increasing DAG size, so if I release something every week, it seems slower with each version, while in fact it is your GPU, not my software Have compared this on current DAg file sizer with older miner and newer and speeds are much different. Done same configs on 1.0.8 and compared to 1.1.6 verison and speed are out regardless of dag files.
|
|
|
|
Amph
Legendary
Offline
Activity: 3248
Merit: 1070
|
|
June 21, 2016, 07:47:40 PM |
|
it seems that without -L single 0 it does not work for me, it keep crashing on first gpu, there are other command that were added, maybe i'm not aware of?... i didn't follow all the recent release might help....
|
|
|
|
jdc4429
Newbie
Offline
Activity: 13
Merit: 0
|
|
June 21, 2016, 08:00:47 PM |
|
Using these instructions to build: sudo apt-get update sudo apt-get -y install software-properties-common add-apt-repository -y ppa:ethereum/ethereum sudo apt-get update sudo apt-get install git cmake libcryptopp-dev libleveldb-dev libjsoncpp-dev libjson-rpc-cpp-dev libboost-all-dev libgmp-dev libreadline-dev libcurl4-gnutls-dev ocl-icd-libopencl1 opencl-headers mesa-common-dev libmicrohttpd-dev build-essential -y git clone https://github.com/Genoil/cpp-ethereum/cd cpp-ethereum/ mkdir build cd build cmake -DBUNDLE=miner .. make -j8 Following that guide will install the master branch aka 1.0.8, as you didn't tell how you obtained the 110 branch, i'm assuming you are either installing the 1.0.8 version or obtaining the latest version some other way than git clone. Also that shows that you enter the directory cpp-ethereum/ but later you point to a cpp-ethereum-110/ directory. Are you perhaps somehow copying files from a directory to another, where some files are from different versions maybe? Maybe just try a clean install of 1.1.6 from source? I know the Github guide can be confusing if you're trying to install the latest version and aren't that familiar with Linux and/or Git. If you want to install the latest version (1.1.6 atm), you can follow this guide, worked fine for me (and some others), first of all, you should to remove your old version completely and to get a clean install or just use a different directory. Install the latest version:
AMD:
sudo apt-get update sudo apt-get -y install software-properties-common sudo add-apt-repository -y ppa:ethereum/ethereum sudo apt-get update sudo apt-get install git cmake libcryptopp-dev libleveldb-dev libjsoncpp-dev libjson-rpc-cpp-dev libboost-all-dev libgmp-dev libreadline-dev libcurl4-gnutls-dev ocl-icd-libopencl1 opencl-headers mesa-common-dev libmicrohttpd-dev build-essential -y git clone -b 110 https://github.com/Genoil/cpp-ethereum.git cd cpp-ethereum/ mkdir build cd build cmake -DBUNDLE=miner .. make -j8 cd ethminer ./ethminer -v
Nvidia:
wget http://developer.download.nvidia.com/compute/cuda/repos/ubuntu1404/x86_64/cuda-repo-ubuntu1404_7.5-18_amd64.deb sudo dpkg -i cuda-repo-ubuntu1404_7.5-18_amd64.deb sudo apt-get -y install software-properties-common sudo add-apt-repository -y ppa:ethereum/ethereum sudo apt-get update sudo apt-get install git cmake libcryptopp-dev libleveldb-dev libjsoncpp-dev libjson-rpc-cpp-dev libboost-all-dev libgmp-dev libreadline-dev libcurl4-gnutls-dev ocl-icd-libopencl1 opencl-headers mesa-common-dev libmicrohttpd-dev build-essential cuda -y git clone -b 110 https://github.com/Genoil/cpp-ethereum.git cd cpp-ethereum/ mkdir build cd build cmake -DBUNDLE=cudaminer .. make -j8 cd ethminer ./ethminer -v Edit: Disclaimer: This is just a small guide i made up, i take no guarantee that it will work, it has been tested on Ubuntu 14.04 and Linux Mint 17.3 where it has worked. Thank you. I will try your instructions. I downloaded the 110 source and just extracted from zip. I will see if your instructions make any difference. Thanks again for your response.
|
|
|
|
carlo_0000
Legendary
Offline
Activity: 1281
Merit: 1003
|
|
June 21, 2016, 08:52:08 PM |
|
i have one (sometime an other one) miner that stop mining after a day or 2 (never mine more that 2 days without stop) nothing wrong with internet connection or pool, other miner working fine m 20:30:26|main Mining on PoWhash #816986d5 : 86.51MH/s [A4724+87:R1+0:F9] m 20:30:28|main Mining on PoWhash #816986d5 : 87.16MH/s [A4724+87:R1+0:F9] i 20:30:30|stratum Received new job #5801 i 20:30:30|openclminer0 set work; seed: #8f602dc7, target: #00000002aa1abc50 i 20:30:30|openclminer1 set work; seed: #8f602dc7, target: #00000002aa1abc50 i 20:30:30|openclminer2 set work; seed: #8f602dc7, target: #00000002aa1abc50 i 20:30:30|openclminer3 set work; seed: #8f602dc7, target: #00000002aa1abc50 i 20:30:31|openclminer4 set work; seed: #8f602dc7, target: #00000002aa1abc50 i 20:30:31|openclminer5 set work; seed: #8f602dc7, target: #00000002aa1abc50 m 20:30:31|main Mining on PoWhash #11f8f0a1 : 6.55MH/s [A4724+87:R1+0:F9] m 20:30:33|main Mining on PoWhash #11f8f0a1 : 84.54MH/s [A4724+87:R1+0:F9] m 20:30:35|main Mining on PoWhash #11f8f0a1 : 86.51MH/s [A4724+87:R1+0:F9] i 20:30:35|stratum No new work received in 180 seconds. i 20:30:35|stratum Reconnecting in 3 seconds... i 20:30:36|stratum Received new job #5802 i 20:30:36|stratum No new work received in 180 seconds. m 20:30:39|main Mining on PoWhash #42a5001a : 0.00MH/s [A4724+87:R1+0:F9] i 20:30:36|stratum No new work received in 180 seconds. i 20:30:38|stratum Connecting to stratum server europe1.ethereum.miningpoolhub.com:20535 i 20:30:39|openclminer5 set work; seed: #8f602dc7, target: #00000002aa1abc50 i 20:30:36|stratum No new work received in 180 seconds. i 20:30:36|openclminer1 set work; seed: #8f602dc7, target: #00000002aa1abc50 i 20:30:37|openclminer2 set work; seed: #8f602dc7, target: #00000002aa1abc50 i 20:31:17|stratum Reconnecting in 3 seconds... i 20:30:36|openclminer0 set work; seed: #8f602dc7, target: #00000002aa1abc50 i 20:30:36|stratum No new work received in 180 seconds. i 20:30:39|stratum Connected to stratum server europe1.ethereum.miningpoolhub.com : 20535 i 20:30:37|openclminer3 set work; seed: #8f602dc7, target: #00000002aa1abc50 m 20:37:15|main Mining on PoWhash #42a5001a : 6.37MH/s [A4724+87:R1+0:F9] i 20:39:19|stratum Received new job #5828 i 20:30:39|stratum Received new job #5809 i 20:30:36|stratum No new work received in 180 seconds. i 20:30:36|stratum No new work received in 180 seconds. i 20:41:08|openclminer1 set work; seed: #8f602dc7, target: #0000000225c17d04 i 20:30:38|openclminer4 set work; seed: #8f602dc7, target: #00000002aa1abc50 i 20:32:52|stratum Reconnecting in 3 seconds... i 20:41:09|openclminer2 set work; seed: #8f602dc7, target: #0000000225c17d04 i 20:44:40|stratum Connecting to stratum server europe1.ethereum.miningpoolhub.com:20535 i 20:44:10|openclminer4 set work; seed: #8f602dc7, target: #0000000225c17d04 i 20:35:16|stratum Reconnecting in 3 seconds... i 20:41:10|openclminer3 set work; seed: #8f602dc7, target: #0000000225c17d04 i 20:38:27|stratum Reconnecting in 3 seconds... i 20:41:07|openclminer0 set work; seed: #8f602dc7, target: #0000000225c17d04 i 20:47:16|stratum Connected to stratum server europe1.ethereum.miningpoolhub.com : 20535 i 20:44:40|stratum Connected to stratum server europe1.ethereum.miningpoolhub.com : 20535 i 20:42:08|stratum Reconnecting in 3 seconds... i 20:42:41|stratum Reconnecting in 3 seconds... i 20:37:13|stratum Connecting to stratum server europe1.ethereum.miningpoolhub.com:20535 i 20:47:16|stratum Connecting to stratum server europe1.ethereum.miningpoolhub.com:20535 i 20:51:08|stratum Connected to stratum server europe1.ethereum.miningpoolhub.com : 20535 i 20:51:08|stratum Connecting to stratum server europe1.ethereum.miningpoolhub.com:20535 i 20:49:53|openclminer4 Solution found; Submitting to europe1.ethereum.miningpoolhub.com ... i 20:30:36|stratum No new work received in 180 seconds. i 20:48:16|stratum Connecting to stratum server europe1.ethereum.miningpoolhub.com:20535 i 20:54:56|openclminer4 Nonce: 0x7af13ddf221d93f7 i 20:55:24|stratum Reconnecting in 3 seconds... i 20:48:16|stratum Connected to stratum server europe1.ethereum.miningpoolhub.com : 20535 i 20:56:57|stratum Connecting to stratum server europe1.ethereum.miningpoolhub.com:20535 i 20:49:31|stratum Received new job #5829 i 20:56:59|stratum Connected to stratum server europe1.ethereum.miningpoolhub.com : 20535 X 20:53:29|stratum Parse response failed: * Line 1, Column 249 Missing ',' or ']' in array declaration
i 20:50:41|stratum Connected to stratum server europe1.ethereum.miningpoolhub.com : 20535 i 20:59:56|stratum Received new job #5881 i 20:39:25|openclminer5 Solution found; Submitting to europe1.ethereum.miningpoolhub.com ... i 20:37:13|stratum Connected to stratum server europe1.ethereum.miningpoolhub.com : 20535 X 20:56:31|openclminer4 Submitting stale solution. i 21:01:51|openclminer1 Solution found; Submitting to europe1.ethereum.miningpoolhub.com ... i 21:01:21|openclminer5 Nonce: 0x049220ff2f00eea6 i 21:01:55|stratum B-) Submitted and accepted. X 20:50:13|stratum Parse response failed: * Line 1, Column 237 Missing ',' or ']' in array declaration
m 21:03:21|main Mining on PoWhash #5754 so i close the miner and start again and it s runing till next stop there is not firewall on computer, so cannot be that, only windows security essential and is disable and sometime same stuff happen on the other miner, and i think computer is some slow when it happen, i use ultravnc it take some time to close the cmd window
|
|
|
|
jdc4429
Newbie
Offline
Activity: 13
Merit: 0
|
|
June 21, 2016, 08:56:38 PM |
|
Using these instructions to build: sudo apt-get update sudo apt-get -y install software-properties-common add-apt-repository -y ppa:ethereum/ethereum sudo apt-get update sudo apt-get install git cmake libcryptopp-dev libleveldb-dev libjsoncpp-dev libjson-rpc-cpp-dev libboost-all-dev libgmp-dev libreadline-dev libcurl4-gnutls-dev ocl-icd-libopencl1 opencl-headers mesa-common-dev libmicrohttpd-dev build-essential -y git clone https://github.com/Genoil/cpp-ethereum/cd cpp-ethereum/ mkdir build cd build cmake -DBUNDLE=miner .. make -j8 Following that guide will install the master branch aka 1.0.8, as you didn't tell how you obtained the 110 branch, i'm assuming you are either installing the 1.0.8 version or obtaining the latest version some other way than git clone. Also that shows that you enter the directory cpp-ethereum/ but later you point to a cpp-ethereum-110/ directory. Are you perhaps somehow copying files from a directory to another, where some files are from different versions maybe? Maybe just try a clean install of 1.1.6 from source? I know the Github guide can be confusing if you're trying to install the latest version and aren't that familiar with Linux and/or Git. If you want to install the latest version (1.1.6 atm), you can follow this guide, worked fine for me (and some others), first of all, you should to remove your old version completely and to get a clean install or just use a different directory. Install the latest version:
AMD:
sudo apt-get update sudo apt-get -y install software-properties-common sudo add-apt-repository -y ppa:ethereum/ethereum sudo apt-get update sudo apt-get install git cmake libcryptopp-dev libleveldb-dev libjsoncpp-dev libjson-rpc-cpp-dev libboost-all-dev libgmp-dev libreadline-dev libcurl4-gnutls-dev ocl-icd-libopencl1 opencl-headers mesa-common-dev libmicrohttpd-dev build-essential -y git clone -b 110 https://github.com/Genoil/cpp-ethereum.git cd cpp-ethereum/ mkdir build cd build cmake -DBUNDLE=miner .. make -j8 cd ethminer ./ethminer -v
Nvidia:
wget http://developer.download.nvidia.com/compute/cuda/repos/ubuntu1404/x86_64/cuda-repo-ubuntu1404_7.5-18_amd64.deb sudo dpkg -i cuda-repo-ubuntu1404_7.5-18_amd64.deb sudo apt-get -y install software-properties-common sudo add-apt-repository -y ppa:ethereum/ethereum sudo apt-get update sudo apt-get install git cmake libcryptopp-dev libleveldb-dev libjsoncpp-dev libjson-rpc-cpp-dev libboost-all-dev libgmp-dev libreadline-dev libcurl4-gnutls-dev ocl-icd-libopencl1 opencl-headers mesa-common-dev libmicrohttpd-dev build-essential cuda -y git clone -b 110 https://github.com/Genoil/cpp-ethereum.git cd cpp-ethereum/ mkdir build cd build cmake -DBUNDLE=cudaminer .. make -j8 cd ethminer ./ethminer -v Edit: Disclaimer: This is just a small guide i made up, i take no guarantee that it will work, it has been tested on Ubuntu 14.04 and Linux Mint 17.3 where it has worked. Thank you. I will try your instructions. I downloaded the 110 source and just extracted from zip. I will see if your instructions make any difference. Thanks again for your response. Got it working. I did get a symbol error when attempting to run the ethminer file the first time I compiled it. Searched on Google about similar issues and found that uninstalling and reinstalling libcryptopp-dev solved the symbol error. Now running 1.1.6. Thanks again Smokyish
|
|
|
|
bensam1231
Legendary
Offline
Activity: 1764
Merit: 1024
|
|
June 21, 2016, 09:09:16 PM |
|
Holy shit, wolf is selling to normal plebs?!?! *gasp* What has the world come to?
Always have, just not the top end algos, usually. SIB/SPR I'm fine with. Ah... just the stuff no one really cares about. Like a single 750ti tanks SPR -_- Genoil what's the compatibility status of your miner with the 1XXX series? I tried to get it running with W8.1 x64 and --cuda-grid-size 2048 --cuda-block-size 128 and it just errors out with 'unspecified error'.
|
I buy private Nvidia miners. Send information and/or inquiries to my PM box.
|
|
|
sp_
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
June 21, 2016, 09:15:32 PM |
|
A smart b...
|
|
|
|
sp_
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
June 21, 2016, 09:17:41 PM |
|
A smart b...
Intelligent miners.. Stupid ppl. Dirty motherfuckers.. The waste is sold by you...
|
|
|
|
BFVMG
Newbie
Offline
Activity: 3
Merit: 0
|
|
June 22, 2016, 02:52:25 AM |
|
Using these instructions to build: sudo apt-get update sudo apt-get -y install software-properties-common add-apt-repository -y ppa:ethereum/ethereum sudo apt-get update sudo apt-get install git cmake libcryptopp-dev libleveldb-dev libjsoncpp-dev libjson-rpc-cpp-dev libboost-all-dev libgmp-dev libreadline-dev libcurl4-gnutls-dev ocl-icd-libopencl1 opencl-headers mesa-common-dev libmicrohttpd-dev build-essential -y git clone https://github.com/Genoil/cpp-ethereum/cd cpp-ethereum/ mkdir build cd build cmake -DBUNDLE=miner .. make -j8 Following that guide will install the master branch aka 1.0.8, as you didn't tell how you obtained the 110 branch, i'm assuming you are either installing the 1.0.8 version or obtaining the latest version some other way than git clone. Also that shows that you enter the directory cpp-ethereum/ but later you point to a cpp-ethereum-110/ directory. Are you perhaps somehow copying files from a directory to another, where some files are from different versions maybe? Maybe just try a clean install of 1.1.6 from source? I know the Github guide can be confusing if you're trying to install the latest version and aren't that familiar with Linux and/or Git. If you want to install the latest version (1.1.6 atm), you can follow this guide, worked fine for me (and some others), first of all, you should to remove your old version completely and to get a clean install or just use a different directory. Install the latest version:
AMD:
sudo apt-get update sudo apt-get -y install software-properties-common sudo add-apt-repository -y ppa:ethereum/ethereum sudo apt-get update sudo apt-get install git cmake libcryptopp-dev libleveldb-dev libjsoncpp-dev libjson-rpc-cpp-dev libboost-all-dev libgmp-dev libreadline-dev libcurl4-gnutls-dev ocl-icd-libopencl1 opencl-headers mesa-common-dev libmicrohttpd-dev build-essential -y git clone -b 110 https://github.com/Genoil/cpp-ethereum.git cd cpp-ethereum/ mkdir build cd build cmake -DBUNDLE=miner .. make -j8 cd ethminer ./ethminer -v
Nvidia:
wget http://developer.download.nvidia.com/compute/cuda/repos/ubuntu1404/x86_64/cuda-repo-ubuntu1404_7.5-18_amd64.deb sudo dpkg -i cuda-repo-ubuntu1404_7.5-18_amd64.deb sudo apt-get -y install software-properties-common sudo add-apt-repository -y ppa:ethereum/ethereum sudo apt-get update sudo apt-get install git cmake libcryptopp-dev libleveldb-dev libjsoncpp-dev libjson-rpc-cpp-dev libboost-all-dev libgmp-dev libreadline-dev libcurl4-gnutls-dev ocl-icd-libopencl1 opencl-headers mesa-common-dev libmicrohttpd-dev build-essential cuda -y git clone -b 110 https://github.com/Genoil/cpp-ethereum.git cd cpp-ethereum/ mkdir build cd build cmake -DBUNDLE=cudaminer .. make -j8 cd ethminer ./ethminer -v Edit: Disclaimer: This is just a small guide i made up, i take no guarantee that it will work, it has been tested on Ubuntu 14.04 and Linux Mint 17.3 where it has worked. I followed the instructions -- and I get this error message: bash: cd: cpp-ethereum/: No such file or directory something needs to be updated? Please help to resolve this.
|
|
|
|
brizio71
Sr. Member
Offline
Activity: 456
Merit: 250
Blockchain Just Entered The Real World
|
|
June 22, 2016, 08:31:58 AM |
|
Hello,
I'm try to using ethminer-0.9.41-genoil-1.1.6 with HD7970 Card (Crimson 15.12) on Windows 10 64 bit 16GB RAM with this command:
setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 ethminer.exe --farm-recheck 200 -G -S eu1.nanopool.org:9999 -O MY_ETH_ADDR.rig2/MY_EMAIL
but I get this error:
No GPU device with sufficient memory was found. Can't GPU mine. Remove the -G argument
what is the problem with my card ?
thx
Fabrizio
|
|
|
|
adamvp
|
|
June 22, 2016, 08:57:38 AM |
|
What ethminer - - list-devices show?
|
I am looking for signature campaign pm me
|
|
|
brizio71
Sr. Member
Offline
Activity: 456
Merit: 250
Blockchain Just Entered The Real World
|
|
June 22, 2016, 09:01:03 AM |
|
What ethminer - - list-devices show?
this is my devices : Listing OpenCL devices. FORMAT: [deviceID] deviceName CL_DEVICE_TYPE: GPU CL_DEVICE_GLOBAL_MEM_SIZE: 3221225472 CL_DEVICE_MAX_MEM_ALLOC_SIZE: 2952790016 CL_DEVICE_MAX_WORK_GROUP_SIZE: 256
|
|
|
|
adamvp
|
|
June 22, 2016, 09:51:12 AM |
|
Try run ethminer with device nr specifing..
|
I am looking for signature campaign pm me
|
|
|
|