ethminer-0.9.41-genoil-1.1

[crazyearner]

Is their a way to reduce the power use on 280x cards and not effect the hash rate that much. Can this be done though MSI after burn to reduce power use as I get no options so am guessing need other software to achieve this or some modded bios for the gpus.

[Pustul]

Any news on the performances on the Pascal gpus?

[jstefanop]

elpida+380x pulls over 21.5mh/s
23mh/s with bios mod

What bios mod, do u have a link?

380's pull same amount...my BIOS does about 21 MH @ 110w

[Genoil]

Hi Genoil
sorry to bother you with this, but, where is the part of the code that outputs to console the stats? I wanna remove the color coding because when I redirect to syslog i get:

Code:

Jul  9 20:34:10 room2 logger: #033[32m  m  #033[35m20:34:10#033[0m#033[30m|#033[34methminer#033[0m  Mining on PoWhash #a45d0e4b#033[0m : 56.62MH/s [A4154+22:R0+0:F0]
Jul  9 20:34:12 room2 logger: #033[32m  m  #033[35m20:34:12#033[0m#033[30m|#033[34methminer#033[0m  Mining on PoWhash #a45d0e4b#033[0m : 55.05MH/s [A4154+22:R0+0:F0]
Jul  9 20:34:14 room2 logger: #033[32m  m  #033[35m20:34:14#033[0m#033[30m|#033[34methminer#033[0m  Mining on PoWhash #a45d0e4b#033[0m : 56.10MH/s [A4154+22:R0+0:F0]

and it is quite complicated to extract the megahashes to display properly on the LCD(actually i had done it as you can see in the image, but sometimes it outputs shit)
here it is when it works (90% of the time) hehe.


thanks!
indkt.

cpp-ethereum/libdevcore/Terminal.h

You can make the color definitions for *nix empty like WIN32 (which also doesn't support console colors like this)

I like what you are doing. Finally a good use for these displays

[Q_R_V]

elpida+380x pulls over 21.5mh/s
23mh/s with bios mod

Can you tell something more about that bios mod? Did you modified memory straps?

[Smokyish]

Any news on the performances on the Pascal gpus?

I can get a stable 31MH/s per card with my 2x MSI 1070 Gaming X cards at 150w per card with OC, stock was 25MH/s, this is on Linux.

https://i1.someimage.com/6DnOiId.png

(Note: This is my gaming rig, so cards are in a case and connected straight to mobo, no risers and im running X, thus card 0 uses some overhead and has a lower clock&rate.)

[induktor]

Hi Genoil
sorry to bother you with this, but, where is the part of the code that outputs to console the stats? I wanna remove the color coding because when I redirect to syslog i get:

Code:

Jul  9 20:34:10 room2 logger: #033[32m  m  #033[35m20:34:10#033[0m#033[30m|#033[34methminer#033[0m  Mining on PoWhash #a45d0e4b#033[0m : 56.62MH/s [A4154+22:R0+0:F0]
Jul  9 20:34:12 room2 logger: #033[32m  m  #033[35m20:34:12#033[0m#033[30m|#033[34methminer#033[0m  Mining on PoWhash #a45d0e4b#033[0m : 55.05MH/s [A4154+22:R0+0:F0]
Jul  9 20:34:14 room2 logger: #033[32m  m  #033[35m20:34:14#033[0m#033[30m|#033[34methminer#033[0m  Mining on PoWhash #a45d0e4b#033[0m : 56.10MH/s [A4154+22:R0+0:F0]

and it is quite complicated to extract the megahashes to display properly on the LCD(actually i had done it as you can see in the image, but sometimes it outputs shit)
here it is when it works (90% of the time) hehe.


thanks!
indkt.

cpp-ethereum/libdevcore/Terminal.h

You can make the color definitions for *nix empty like WIN32 (which also doesn't support console colors like this)

I like what you are doing. Finally a good use for these displays

Thank you!, done it! , i didn't look enough on the code or I will have seen it I am getting lazy, not good.

if you or someone wanna do it, I can create a thread with the howto, it's not difficult (linux only) it is a messy bash script that outputs the data from nvidia-smi and syslog formatted via serial port, then a pic 16F84 takes that and show it on the display.

[giagge]

Any news on the performances on the Pascal gpus?

I can get a stable 31MH/s per card with my 2x MSI 1070 Gaming X cards at 150w per card with OC, stock was 25MH/s, this is on Linux.



(Note: This is my gaming rig, so cards are in a case and connected straight to mobo, no risers and im running X, thus card 0 uses some overhead and has a lower clock&rate.)

Good . I want buy a 1070 in weekend .

[Dolmater]

Any news on the performances on the Pascal gpus?

I can get a stable 31MH/s per card with my 2x MSI 1070 Gaming X cards at 150w per card with OC, stock was 25MH/s, this is on Linux.


(Note: This is my gaming rig, so cards are in a case and connected straight to mobo, no risers and im running X, thus card 0 uses some overhead and has a lower clock&rate.)

That is good performance on the Linux. When will we get similar performance of the Windows. I am waiting to buy a 1070 to run in Windows.

[crazyearner]

Using ethminer can I have 2 instances of it running one mining on ETH and one mining say onSia coin or will this not work I did try it but seems to crash am guessing so far can only use claymore to dual mine and not have 2 instances of ethmienr running?

[bensam1231]

Using ethminer can I have 2 instances of it running one mining on ETH and one mining say onSia coin or will this not work I did try it but seems to crash am guessing so far can only use claymore to dual mine and not have 2 instances of ethmienr running?

It doesn't work very well. You'll get about the same results mining 50% of each or worse. Dual miner is a commonly requested feature for Nvidia developers right now in multiple areas. No one is developing one yet.

[giagge]

What do you think for Nvidia gtx 1060 ? .

[induktor]

Hi Genoil
sorry to bother you with this, but, where is the part of the code that outputs to console the stats? I wanna remove the color coding because when I redirect to syslog i get:

Code:

Jul  9 20:34:10 room2 logger: #033[32m  m  #033[35m20:34:10#033[0m#033[30m|#033[34methminer#033[0m  Mining on PoWhash #a45d0e4b#033[0m : 56.62MH/s [A4154+22:R0+0:F0]
Jul  9 20:34:12 room2 logger: #033[32m  m  #033[35m20:34:12#033[0m#033[30m|#033[34methminer#033[0m  Mining on PoWhash #a45d0e4b#033[0m : 55.05MH/s [A4154+22:R0+0:F0]
Jul  9 20:34:14 room2 logger: #033[32m  m  #033[35m20:34:14#033[0m#033[30m|#033[34methminer#033[0m  Mining on PoWhash #a45d0e4b#033[0m : 56.10MH/s [A4154+22:R0+0:F0]

and it is quite complicated to extract the megahashes to display properly on the LCD(actually i had done it as you can see in the image, but sometimes it outputs shit)
here it is when it works (90% of the time) hehe.


thanks!
indkt.

That's pretty cool.  Nice work!

Thanks , if you are interested in doing it, i can post a guide.

[bensam1231]

Using ethminer can I have 2 instances of it running one mining on ETH and one mining say onSia coin or will this not work I did try it but seems to crash am guessing so far can only use claymore to dual mine and not have 2 instances of ethmienr running?

It doesn't work very well. You'll get about the same results mining 50% of each or worse. Dual miner is a commonly requested feature for Nvidia developers right now in multiple areas. No one is developing one yet.

Mostly requested by you.

I've been quite vocal about it, yes. Ask a Nvidia miner if he doesn't want to make more? I don't really think it matters at all how much I've asked for it, rather that people just want it.

They're more inclined to donate if for features and performance enhancements that make them more money. Nvidia GPUs definitely have a lot of capacity available for it too.

[giagge]

Genoil - Wolf0 , create one miner free for LBRY ( LBC ) , on Nvidia card please .

[Foss]

Genoil Hi, when release? 

[orcanice]

I have some problems here..

Here is my config.


ethminer.exe -G -S exp-eu.dwarfpool.com:8018 -SC 2 -SP 1 -O 0x4655a0336c9faff2f6e6e702c86f1c061e22df97.rigone --cl-local-work 256 --cl-global-work 16384 --farm-recheck 200 2>> miner.log


I keep getting this in my log file.

i  11:02:32|<unknown>  Connecting to stratum server exp-eu.dwarfpool.com:8018
Could not resolve hostexp-eu.dwarfpool.com:8018





EDIT: Figured it out... forgot to add -SC 2

[LeChuckDE]

My first custom Kernel for AMD HD7850 Pitcarn :

Code:

  m  23:30:25|ethminer-1.1.8  Mining on PoWhash #b558a53c : 16.74MH/s [A0+0:R0+0:F0]
  m  23:30:26|ethminer-1.1.8  Mining on PoWhash #b558a53c : 16.74MH/s [A0+0:R0+0:F0]
  m  23:30:26|ethminer-1.1.8  Mining on PoWhash #b558a53c : 16.74MH/s [A0+0:R0+0:F0]

YEAY

[Genoil]

My first custom Kernel for AMD HD7850 Pitcarn :

Code:

  m  23:30:25|ethminer-1.1.8  Mining on PoWhash #b558a53c : 16.74MH/s [A0+0:R0+0:F0]
  m  23:30:26|ethminer-1.1.8  Mining on PoWhash #b558a53c : 16.74MH/s [A0+0:R0+0:F0]
  m  23:30:26|ethminer-1.1.8  Mining on PoWhash #b558a53c : 16.74MH/s [A0+0:R0+0:F0]

YEAY

Nice! How much increase from my kernel?

[rednoW]

My first custom Kernel for AMD HD7850 Pitcarn :

Code:

  m  23:30:25|ethminer-1.1.8  Mining on PoWhash #b558a53c : 16.74MH/s [A0+0:R0+0:F0]
  m  23:30:26|ethminer-1.1.8  Mining on PoWhash #b558a53c : 16.74MH/s [A0+0:R0+0:F0]
  m  23:30:26|ethminer-1.1.8  Mining on PoWhash #b558a53c : 16.74MH/s [A0+0:R0+0:F0]

YEAY

Nice! How much increase from my kernel?

my hd7950 1000/1250 gives 17.5 with claymore on current epoch, so 16.7 for old low end gpu is very impressive!
But yeah - we need to see if it works with the pool ))