¤¤¤¤ antrun.de - Antrouter R1 Fun-Run - compare your share ¤¤¤¤

[citronick]

I second the idea... you never know.... imagine an R1 hitting a block, it will be surely a historic first in solo.ckpool !!

Nothing is Impossible.

Impossible is Nothing.

[1714913165]

1714913165

[1714913165]

1714913165

[1714913165]

1714913165

[RichBC]

Some ideas for the rules:


> participation is voluntary
> %-amout of the block can be chosen by the user
> participants get an exclusive badge in the antrun.de page
> User must be an active miner for at least 1 day

any more ideas?

Yes I like all these ideas, so an extra column / badge on the spreadsheet with a % that they are sharing. Prefer the idea of keeping our own wallets.

Let's keep it as simple as possible, but anything that adds a bit of interest is good. I am sure we can have a few other ideas. 

Like we could have an optional weekly highest best share contest where we put money into a pot?

Rich

[Mikestang]

I'll join the voluntary share-your-R1-block-reward-with-other-R1ers, I do not know how much I would be willing to share, maybe like 1 coin per participant or something (up to 10 coins), but if I hit a block with the R1 I'll worry about it then.

A weekly contest that we buy into for high share would be fun, but we would need 1 trusted member to hold the fees and payout.  I would probably do that for something small like 0.01 a week per person, voluntary as well.  We would need a way to track the weekly shares, though, no sure how that would work.  Instead it could be "highest share per solo pool block" since best share reported there resets after each block (not best ever share, just best share).

And WOW on the 13G best share, that's the highest I've ever seen for so little hash power.  In fact it is better than my S5 has done in the couple months I have owned it.

[minibit]

Does anyone have played with voltage too, or just the frequency for OC?

P.S.: Another update of the website will follow soon 

[citronick]

Does anyone have played with voltage too, or just the frequency for OC?

P.S.: Another update of the website will follow soon  

I use 143.75mhz and 777v and --suggest-diff 512

BTW, is using a proxy to solo mine practical?
I mean all of our R1s pointing to a single proxy to the solo pool?
Correct me if I am wrong in this idea...

[minibit]

Does anyone have played with voltage too, or just the frequency for OC?

P.S.: Another update of the website will follow soon  

I use 143.75mhz and 777v and --suggest-diff 512

Thanks for your answer. I'm afraid I can't give you an answer to your proxy question.

@everyone: Would it be nice if we also add "voltage" to the table on antrun.de?

[RichBC]

Does anyone have played with voltage too, or just the frequency for OC?

P.S.: Another update of the website will follow soon 

I have played with voltage on my 1st R1, not the one in this group. To do so you have to open up the R1 and add a potentiometer, so far from straightforward. It is covered in th main R1 thread.

Yo can then go higher in frequency but who'll need to add cooling. To go even higher you then have to replace the PSU.

Rich

[minibit]

Does anyone have played with voltage too, or just the frequency for OC?

P.S.: Another update of the website will follow soon 

I have played with voltage on my 1st R1, not the one in this group. To do so you have to open up the R1 and add a potentiometer, so far from straightforward. It is covered in th main R1 thread.

Yo can then go higher in frequency but who'll need to add cooling. To go even higher you then have to replace the PSU.

Rich

Thanks, Rich. Do the voltage settings on the webinterface not work? If it's that much of 'work' to over- or undervolt, then this wouldn't be adopted by many and the voltage field in the antrun list would be unnecessary.

[RichBC]

Does anyone have played with voltage too, or just the frequency for OC?

P.S.: Another update of the website will follow soon 

I have played with voltage on my 1st R1, not the one in this group. To do so you have to open up the R1 and add a potentiometer, so far from straightforward. It is covered in th main R1 thread.

Yo can then go higher in frequency but who'll need to add cooling. To go even higher you then have to replace the PSU.

Rich

Thanks, Rich. Do the voltage settings on the webinterface not work? If it's that much of 'work' to over- or undervolt, then this wouldn't be adopted by many and the voltage field in the antrun list would be unnecessary.

Correct the voltage cannot be changed from the web interface. For me it was just an excercise to see what was possible.

Rich

[ammi84]

v11 is online

Big Update

> You can update the Mhz now for yourself - just enter your BTC Adress without worker, choose MHz and hit "update"
> Fancy Top3-Badges
> Refresh-Script Bugfixing
> more Stats (total / average) - we will see if all stats are useful :-)
> better offline-indication

Thanks to minibit

[citronick]

v11 is online

Big Update

> You can update the Mhz now for yourself - just enter your BTC Adress without worker, choose MHz and hit "update"
> Fancy Top3-Badges
> Refresh-Script Bugfixing
> more Stats (total / average) - we will see if all stats are useful :-)
> better offline-indication

Thanks to minibit

just a thought - would the flags be better off in another column so that  refresh is smoother?

[minibit]

just a thought - would the flags be better off in another column so that  refresh is smoother?

Yes, we can do that.


I've hooked up a spare 40mm fan to the usb port and mounted it with tesa to the side of the device, leaving a small gap between fan and side plate.
My R1 is running at 162.5MHz. Before mounting a fan, I could measure up to 47° C on that side. The fan makes no noise at all.

[jacobmayes94]

I was gonna get one soon and mount a fan on the inside to enable me to clock it higher. If that hits a block id be absolutely astounded, in theory you could find a block with a CPU though, all it takes is a single hash out of the 5bn a second it tries. At 5 GH/s which is the R1s stock, a few thousand years But due to luck, could be tomorrow, it could take even LONGER than the projected time, in theory a 1pH pool can never find blocks. My S3s pulled 7BN share in two weeks, wheras the 1pH rentals I have done never came higher than 1 billion!

[Amph]

Hi

So what is the chance of mining a block with a R1?

that thing mine only 15k satoshi per day, it's better to leave the mining scene and earn bitcoin with faucets at that point, it will take you more than your entire life on average to find a block, and probably never

[willi9974]

it is only a hobby and fun

[citronick]

Hi

So what is the chance of mining a block with a R1?

This project is purely for fun and good de-stresser.

I think many of the R1 Racers here will agree 

Who knows... one day a block happens.... it will be a world record for sure.

Btw, what is the smallest miner solving a block ever recorded? we should ask CK.

[minibit]

Hi

So what is the chance of mining a block with a R1?

This project is purely for fun and good de-stresser.

I think many of the R1 Racers here will agree 

Who knows... one day a block happens.... it will be a world record for sure.

Btw, what is the smallest miner solving a block ever recorded? we should ask CK.

I agree 
One guy have found a block with a GekkoScience Compac Stickminer (8 - 16 GH/s) from sidehack.

[citronick]

Guilty as charged... curiosity "killed" the cat (R1)

I got curious and dismantled the R1 and put a Arctic USB fan right on top of naked R1.
Modded the power plug to extend direct into the power point.

I don't know if it will go any quicker or produce more hash but -- I guess this is it most optimum before R1 goes crazy.

It's currently at 137.5mhz, 888v and "--suggest-diff-64" settings.
It's hashing and ckpool is accepting the shares.

Note: the R1 is also connected to a dumb 4-port USB with 3 x U3 hashing at about 155-165ghs total.



Current Status:

Racer: citronick
HW: Antrouter R1 - Batch 1
Pool settings: stratum+tcp://solo.ckpool.org:3333 --suggest-diff 12
Password: x
Frequency: 137.5mhz
Voltage: 999
Shares: 5596 accepted in 12 hours 6mins
Rejects: 0%
Average speed: 6gh/s ++
Normal speed: 2gh/s to 14gh/s ++
Modifications: Refer to picture.

[RichBC]

Did we ever see proof of the Compac that found a Block?

So just to check is this a no holds barred, open it up, make mods, change the voltage, add a fan, change the voltage run? Or are there any constraints?

Rich

[citronick]

Did we ever see proof of the Compac that found a Block?

So just to check is this a no holds barred, open it up, make mods, change the voltage, add a fan, change the voltage run? Or are there any constraints?

Rich

all of us are already using a modded firmware by crazyguy, tweked mhz and volts, added fans.... and for hours of fun and hobbying.... perhaps we should not put any constraints... but I am good for any reasonable ground rules, as long as it does not kill the fun... after all this race is purely for fun and sharing of ideas etc.