gt_addict
|
|
June 08, 2016, 07:44:30 PM |
|
I've been hovering around the middle of the pack, seems I could use some WD40, too. Or some duct tape, every good machine needs duct tape. Bonus points if you know what the WD stands for w/out google. A few years ago my mechanic told me WD40's main ingredient. It is "fish oil" - I simply couldn't believe it. I know this one well. It's "Water Displacement" and the 40 was the 40th formula they tried
|
**SUPPORT SIDEHACK** Miner Development Donations to: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Donations/Tips to:- 1GTADDicTXD1uachKKgW24DZDxDGhSMdRa
Join Bitconnect: https://bitconnect.co/?ref=gtaddict
|
|
|
|
|
|
|
"Bitcoin: the cutting edge of begging technology." -- Giraffe.BTC
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
andymanone
Sr. Member
Offline
Activity: 432
Merit: 250
Save the past & use the future ©
|
|
June 08, 2016, 08:07:38 PM |
|
I've been hovering around the middle of the pack, seems I could use some WD40, too. Or some duct tape, every good machine needs duct tape. Bonus points if you know what the WD stands for w/out google. A few years ago my mechanic told me WD40's main ingredient. It is "fish oil" - I simply couldn't believe it. I know this one well. It's "Water Displacement" and the 40 was the 40th formula they tried U know it w/o google´s help ?
|
#Compare your share!# Join the community and be a member of http://www.gekkorun.de today! Open for all Antrouter R1, Gekkoscience Compac, 2PAC and sidehack´s coming soon Bitfury Asic Miners! Notice: gekkorun 2.0 goes offline in 10/07/18 (and will be not longer supported anymore) My previous ANTR1/Gekko Tuning success: Ant R1=500MHz@0.96V@27,66GH/s / Gekko=475MHz@0.9V /stable 450MHz/0.88V@23,78GH/s
|
|
|
gt_addict
|
|
June 08, 2016, 08:22:36 PM |
|
Absolutely no google conference calls at all. Learnt it science years ago and has always stuck as its one of those questions people ask when you suggest "have you tried WD40?"
But then any thin oil that's available in an aerosol can will do the same thing. Only addition to some is ptfe or Teflon.
|
**SUPPORT SIDEHACK** Miner Development Donations to: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Donations/Tips to:- 1GTADDicTXD1uachKKgW24DZDxDGhSMdRa
Join Bitconnect: https://bitconnect.co/?ref=gtaddict
|
|
|
andymanone
Sr. Member
Offline
Activity: 432
Merit: 250
Save the past & use the future ©
|
|
June 08, 2016, 08:28:27 PM |
|
Absolutely no google conference calls at all. Learnt it science years ago and has always stuck as its one of those questions people ask when you suggest "have you tried WD40?"
But then any thin oil that's available in an aerosol can will do the same thing. Only addition to some is ptfe or Teflon.
OK, great ! andY
|
#Compare your share!# Join the community and be a member of http://www.gekkorun.de today! Open for all Antrouter R1, Gekkoscience Compac, 2PAC and sidehack´s coming soon Bitfury Asic Miners! Notice: gekkorun 2.0 goes offline in 10/07/18 (and will be not longer supported anymore) My previous ANTR1/Gekko Tuning success: Ant R1=500MHz@0.96V@27,66GH/s / Gekko=475MHz@0.9V /stable 450MHz/0.88V@23,78GH/s
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
June 08, 2016, 09:59:39 PM |
|
Hah, nice flow chart. This is the one that I have up at work: I know this one well. It's "Water Displacement" and the 40 was the 40th formula they tried Ding ding ding winner winner chicken dinner.
|
|
|
|
andymanone
Sr. Member
Offline
Activity: 432
Merit: 250
Save the past & use the future ©
|
|
June 09, 2016, 08:21:24 AM |
|
Hah, nice flow chart. This is the one that I have up at work: Haha, great !!!!
|
#Compare your share!# Join the community and be a member of http://www.gekkorun.de today! Open for all Antrouter R1, Gekkoscience Compac, 2PAC and sidehack´s coming soon Bitfury Asic Miners! Notice: gekkorun 2.0 goes offline in 10/07/18 (and will be not longer supported anymore) My previous ANTR1/Gekko Tuning success: Ant R1=500MHz@0.96V@27,66GH/s / Gekko=475MHz@0.9V /stable 450MHz/0.88V@23,78GH/s
|
|
|
Denizs66
|
|
June 09, 2016, 09:12:40 AM |
|
@Dennizs66: Whatta hell is that ? More than 900GH/s peak ? Avg 254GH/s ? Bestshare 258.820.149 ?It happened now for two times! Cheating isn't really funny . andY Hey Guys, I never had a antrouter. It was only a NF that was a little bit overclocked. I wish you guys a lot of fun and luck to get a BLOCK soon with this little monsters. Deniz
|
|
|
|
andymanone
Sr. Member
Offline
Activity: 432
Merit: 250
Save the past & use the future ©
|
|
June 09, 2016, 12:41:00 PM |
|
Hey Guys,
I never had a antrouter. It was only a NF that was a little bit overclocked. I wish you guys a lot of fun and luck to get a BLOCK soon with this little monsters.
Deniz
Hi Deniz, thanks for feedback. But it´s especially called " ANTRUN", ´cause it´s for ants and not for power horses . andY
|
#Compare your share!# Join the community and be a member of http://www.gekkorun.de today! Open for all Antrouter R1, Gekkoscience Compac, 2PAC and sidehack´s coming soon Bitfury Asic Miners! Notice: gekkorun 2.0 goes offline in 10/07/18 (and will be not longer supported anymore) My previous ANTR1/Gekko Tuning success: Ant R1=500MHz@0.96V@27,66GH/s / Gekko=475MHz@0.9V /stable 450MHz/0.88V@23,78GH/s
|
|
|
KoLamDuiT
Newbie
Offline
Activity: 11
Merit: 0
|
|
June 09, 2016, 01:52:23 PM |
|
|
|
|
|
andymanone
Sr. Member
Offline
Activity: 432
Merit: 250
Save the past & use the future ©
|
|
June 09, 2016, 02:43:49 PM |
|
Welcome KoLamDuiT, yes of course, we´ll add you . Is it an Antrouter and only "one" Antrouter you use? If you use more of them, than it´s neccessary, to separate the worker, e.g.: 1KZpz9F9NdNGSC7fJMnfZhvziJxuZn7iD6.worker1 1KZpz9F9NdNGSC7fJMnfZhvziJxuZn7iD6.worker2 1KZpz9F9NdNGSC7fJMnfZhvziJxuZn7iD6.worker3 Cheers, andY
|
#Compare your share!# Join the community and be a member of http://www.gekkorun.de today! Open for all Antrouter R1, Gekkoscience Compac, 2PAC and sidehack´s coming soon Bitfury Asic Miners! Notice: gekkorun 2.0 goes offline in 10/07/18 (and will be not longer supported anymore) My previous ANTR1/Gekko Tuning success: Ant R1=500MHz@0.96V@27,66GH/s / Gekko=475MHz@0.9V /stable 450MHz/0.88V@23,78GH/s
|
|
|
KoLamDuiT
Newbie
Offline
Activity: 11
Merit: 0
|
|
June 09, 2016, 02:55:44 PM Last edit: June 09, 2016, 03:09:44 PM by KoLamDuiT |
|
Welcome KoLamDuiT, yes of course, we´ll add you . Is it an Antrouter and only "one" Antrouter you use? If you use more of them, than it´s neccessary, to separate the worker, e.g.: 1KZpz9F9NdNGSC7fJMnfZhvziJxuZn7iD6.worker1 1KZpz9F9NdNGSC7fJMnfZhvziJxuZn7iD6.worker2 1KZpz9F9NdNGSC7fJMnfZhvziJxuZn7iD6.worker3 Cheers, andY Yes andY now i have only 1 Antrouter but i dont know set type worker, can u guide me step by step?, earning wallet and payout?
|
|
|
|
andymanone
Sr. Member
Offline
Activity: 432
Merit: 250
Save the past & use the future ©
|
|
June 09, 2016, 03:11:16 PM |
|
Welcome KoLamDuiT, yes of course, we´ll add you . Is it an Antrouter and only "one" Antrouter you use? If you use more of them, than it´s neccessary, to separate the worker, e.g.: 1KZpz9F9NdNGSC7fJMnfZhvziJxuZn7iD6.worker1 1KZpz9F9NdNGSC7fJMnfZhvziJxuZn7iD6.worker2 1KZpz9F9NdNGSC7fJMnfZhvziJxuZn7iD6.worker3 Cheers, andY Yes andY now i have only 1 Antrouter but i dont know set type worker, can u guide me for me? Ahh okay, yes of course . But first: I see two workers on your BTC Address: here: http://solo.ckpool.org/users/1KZpz9F9NdNGSC7fJMnfZhvziJxuZn7iD6-> "workers": 2 ? To separate it in different worker is only important, if you use (or want to use soon) more than one Miner on the same BTC-Address The only thing what you have todo is to set in the Tab "R1 Miner Configuration" in the field "Pool1 Worker" your BTC-Address and add a workers, e.g.: 1KZpz9F9NdNGSC7fJMnfZhvziJxuZn7iD6.ANTR1 Than click "Save & Apply" Thats all ! And if you use more than one, than choose for every next single one: 1KZpz9F9NdNGSC7fJMnfZhvziJxuZn7iD6.ANTR2 1KZpz9F9NdNGSC7fJMnfZhvziJxuZn7iD6.ANTR3 etc. ............. earning wallet and payout?
okay, only for understanding: It´s a solo-pool also called Lotto-pool, that means no earnings at all, except you´ll find a block . The payout will be transfered to your BTC address, you´ve choosen for your miner! in your case to: 1KZpz9F9NdNGSC7fJMnfZhvziJxuZn7iD6 Cheers, andY
|
#Compare your share!# Join the community and be a member of http://www.gekkorun.de today! Open for all Antrouter R1, Gekkoscience Compac, 2PAC and sidehack´s coming soon Bitfury Asic Miners! Notice: gekkorun 2.0 goes offline in 10/07/18 (and will be not longer supported anymore) My previous ANTR1/Gekko Tuning success: Ant R1=500MHz@0.96V@27,66GH/s / Gekko=475MHz@0.9V /stable 450MHz/0.88V@23,78GH/s
|
|
|
KoLamDuiT
Newbie
Offline
Activity: 11
Merit: 0
|
|
June 09, 2016, 03:34:45 PM Last edit: June 09, 2016, 03:49:55 PM by KoLamDuiT |
|
Welcome KoLamDuiT, yes of course, we´ll add you . Is it an Antrouter and only "one" Antrouter you use? If you use more of them, than it´s neccessary, to separate the worker, e.g.: 1KZpz9F9NdNGSC7fJMnfZhvziJxuZn7iD6.worker1 1KZpz9F9NdNGSC7fJMnfZhvziJxuZn7iD6.worker2 1KZpz9F9NdNGSC7fJMnfZhvziJxuZn7iD6.worker3 Cheers, andY Yes andY now i have only 1 Antrouter but i dont know set type worker, can u guide me for me? Ahh okay, yes of course . But first: I see two workers on your BTC Address: here: http://solo.ckpool.org/users/1KZpz9F9NdNGSC7fJMnfZhvziJxuZn7iD6-> "workers": 2 ? To separate it in different worker is only important, if you use (or want to use soon) more than one Miner on the same BTC-Address The only thing what you have todo is to set in the Tab "R1 Miner Configuration" in the field "Pool1 Worker" your BTC-Address and add a workers, e.g.: 1KZpz9F9NdNGSC7fJMnfZhvziJxuZn7iD6.ANTR1 Than click "Save & Apply" Thats all ! And if you use more than one, than choose for every next single one: 1KZpz9F9NdNGSC7fJMnfZhvziJxuZn7iD6.ANTR2 1KZpz9F9NdNGSC7fJMnfZhvziJxuZn7iD6.ANTR3 etc. ............. earning wallet and payout?
okay, only for understanding: It´s a solo-pool also called Lotto-pool, that means no earnings at all, except you´ll find a block . The payout will be transfered to your BTC address, you´ve choosen for your miner! in your case to: 1KZpz9F9NdNGSC7fJMnfZhvziJxuZn7iD6 Cheers, andY andY... im only have one antrouter, i dont know my worker in "R1 Miner Configuration" 2 worker http://prntscr.com/bebze0 this is my configuration give me screenshot tutorial setup "R1 Miner Configuration"
|
|
|
|
andymanone
Sr. Member
Offline
Activity: 432
Merit: 250
Save the past & use the future ©
|
|
June 09, 2016, 03:51:49 PM |
|
andY... im only have one antrouter, i dont know my worker in "R1 Miner Configuration" 2 worker http://prntscr.com/bebze0 this is my configuration Ahh okay, hmm, not sure, why it shows 2 workers at your stats... Maybe you use an other miner (not an Antrouter) on the same BTC address too? Okay, nevertheless , I can add you with the following credentials: User: KoLamDuiT Country: INO Worker: 1KZpz9F9NdNGSC7fJMnfZhvziJxuZn7iD6 andY
|
#Compare your share!# Join the community and be a member of http://www.gekkorun.de today! Open for all Antrouter R1, Gekkoscience Compac, 2PAC and sidehack´s coming soon Bitfury Asic Miners! Notice: gekkorun 2.0 goes offline in 10/07/18 (and will be not longer supported anymore) My previous ANTR1/Gekko Tuning success: Ant R1=500MHz@0.96V@27,66GH/s / Gekko=475MHz@0.9V /stable 450MHz/0.88V@23,78GH/s
|
|
|
KoLamDuiT
Newbie
Offline
Activity: 11
Merit: 0
|
|
June 09, 2016, 04:01:36 PM Last edit: June 09, 2016, 04:21:34 PM by KoLamDuiT |
|
andY... im only have one antrouter, i dont know my worker in "R1 Miner Configuration" 2 worker http://prntscr.com/bebze0 this is my configuration Ahh okay, hmm, not sure, why it shows 2 workers at your stats... Maybe you use an other miner (not an Antrouter) on the same BTC address too? Okay, nevertheless , I can add you with the following credentials: User: KoLamDuiT Country: INO Worker: 1KZpz9F9NdNGSC7fJMnfZhvziJxuZn7iD6 andY antrun.de User: KoLamDuiT Country: INDONESIA Worker: 1KZpz9F9NdNGSC7fJMnfZhvziJxuZn7iD6.KoLamDuiT okay andY, now im fix my worker, in "U3 Configuration" iam erase worker in Pool1 worker... heheee... http://solo.ckpool.org/users/1KZpz9F9NdNGSC7fJMnfZhvziJxuZn7iD6happy mining, I hope can find the block again ^_^
|
|
|
|
andymanone
Sr. Member
Offline
Activity: 432
Merit: 250
Save the past & use the future ©
|
|
June 09, 2016, 06:49:37 PM Last edit: June 09, 2016, 07:00:03 PM by andymanone |
|
You´re added now. Thanks for joining & have fun ! There is just a little issue with your country flag, but we´ll fix it asap. Btw, you can adjust your displayed clockrate at antrun for your R1 antrun.de -> scroll down -> Change your frequency: -> insert "BTC_Worker", choose frequency and hit Update Cheers, andY
|
#Compare your share!# Join the community and be a member of http://www.gekkorun.de today! Open for all Antrouter R1, Gekkoscience Compac, 2PAC and sidehack´s coming soon Bitfury Asic Miners! Notice: gekkorun 2.0 goes offline in 10/07/18 (and will be not longer supported anymore) My previous ANTR1/Gekko Tuning success: Ant R1=500MHz@0.96V@27,66GH/s / Gekko=475MHz@0.9V /stable 450MHz/0.88V@23,78GH/s
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
June 09, 2016, 11:07:54 PM |
|
Welcome KoLamDuiT, yes of course, we´ll add you . Is it an Antrouter and only "one" Antrouter you use? If you use more of them, than it´s neccessary, to separate the worker, e.g.: 1KZpz9F9NdNGSC7fJMnfZhvziJxuZn7iD6.worker1 1KZpz9F9NdNGSC7fJMnfZhvziJxuZn7iD6.worker2 1KZpz9F9NdNGSC7fJMnfZhvziJxuZn7iD6.worker3 Cheers, andY Yes andY now i have only 1 Antrouter but i dont know set type worker, can u guide me step by step?, earning wallet and payout? @kolamduit -- just to set you expectations.... this group is purely for hobby and fun.... using the R1 (other miner hw not allowed). What is our chances of one of our R1's striking a block in ck's solo pool.... probably astronomically very very little - it will be a miracle if it happens. Just to set your expectations...
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
KoLamDuiT
Newbie
Offline
Activity: 11
Merit: 0
|
|
June 10, 2016, 01:45:00 AM |
|
You´re added now. Thanks for joining & have fun ! There is just a little issue with your country flag, but we´ll fix it asap. Btw, you can adjust your displayed clockrate at antrun for your R1 antrun.de -> scroll down -> Change your frequency: -> insert "BTC_Worker", choose frequency and hit Update Cheers, andY Hello my friend andY and all admin antrun.de...., please change my country INO to ID because flag not show if you type INO Cheers, KoLamDuiT
|
|
|
|
ammi84 (OP)
|
|
June 10, 2016, 05:18:09 AM |
|
You´re added now. Thanks for joining & have fun ! There is just a little issue with your country flag, but we´ll fix it asap. Btw, you can adjust your displayed clockrate at antrun for your R1 antrun.de -> scroll down -> Change your frequency: -> insert "BTC_Worker", choose frequency and hit Update Cheers, andY Hello my friend andY and all admin antrun.de...., please change my country INO to ID because flag not show if you type INO Cheers, KoLamDuiT hi is changed and should work now nice to have you here have fun and a warm welcome
|
|
|
|
andymanone
Sr. Member
Offline
Activity: 432
Merit: 250
Save the past & use the future ©
|
|
June 10, 2016, 01:32:56 PM |
|
My bestshare jumped up again "bestshare": 451800636.7913087 Holding that 1st place spot...
|
#Compare your share!# Join the community and be a member of http://www.gekkorun.de today! Open for all Antrouter R1, Gekkoscience Compac, 2PAC and sidehack´s coming soon Bitfury Asic Miners! Notice: gekkorun 2.0 goes offline in 10/07/18 (and will be not longer supported anymore) My previous ANTR1/Gekko Tuning success: Ant R1=500MHz@0.96V@27,66GH/s / Gekko=475MHz@0.9V /stable 450MHz/0.88V@23,78GH/s
|
|
|
|