[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[thedue]

Tytanick -- don't know if this question was posted already ... will your smOS support WIFI anytime soon?

I think I saw in previous post that it will be supported in future versions.

Ubuntu 16.04 should already support WIFI but just to clarify for smOS.

Thanks.

No WIFI, at least not shorttime

[citronick]

Hi Tytanick

Would it be possible to add a miner for Decred.

Use the sgminer v5.5 for Pascal

the decred algorithm is also included in this version so you can just change the "-k pascal" to "-k decred" and off you go.

Sample:
-k decred -o stratum+tcp://decred.hk.nicehash.com:3354 -u <yourBTCaddress>.$rigName -p x -I 21 -w 64 -g2 --text-only

Note: I am not too sure if "-I 21 -w 64 -g2" is best settings for DECRED. Anyone knows?

[tytanick]

Rig grouping i didnt started. I will start  this feature soon.

Wifi, not right now but more and more people ask about it so i guess i should think about it.

Hi,
Im getting this error when the OS try to auto upgrade, what I should do?
Thanks.

Dont worry about it. As long as everyting is working.
Updating from other rigs in network ? nope. This is too much work.
Anyway all updates are incremental so only new things are downloaded. its more less 1-10 MB for each update.
Is it too much ? If they are downloading not longer than 30 minutes then i would say its should not be a problem.

I was busy with starting prototype of Extension Board for SRR.
Just few more days and i will be moving again is SM OS updates.

[tutorialevideo]

Great! hope you finish your work quick and return to OS development, in my case is very bad managing several clients with diferent email address... so this group feature is a must.

I will try starting more rigs on your OS after grouping is done.

Thank you

[citronick]

Tytanick...

Claymore newest ZEC miner... fixed a number bugs with relations to intensity settings.

v12.2:

- fixed issue with "-ttli" option.
- improved "-mport" option, now you can specify network adapter IP for incoming connections for remote management.
- added "-old 1" option, try to use it if v12.0 works stable for you, but v12.1 is unstable.

[philipma1957]

claymores 8.0 eth is causing me to get open cl   on and off sometimes 20 hours good .

sometimes 5 hours good.  only on the 8 card pandaminer.  and always card six.



next issue is mining eth and pasc

can we do this ?

I do not see it below.

[citronick]

Hi Tytanick,

Please add/replace/update latest sgminer-GM-5.5.5-8

Thanks!

UPDATE: 1067 again
I fcked up
sgminer-gm-nh-5.5.5-7 miner was in deed normal sgminer-gm-5.5.5 (from the beginning !)
Sorry guys, I already fixed it right now. It was wrong path becasue i copied it from normal sgminer and forgot to change path to sgminer-nh ...
Please RELOAD miner right now and you will be using sgminer-gm-nh-5.5.5-7

I also changed default config for this miner:
--no-submit-stale --kernel cryptonight -o stratum+tcp://cryptonight.eu.nicehash.com:3355 -u 1ERRVbvV23h51ScH73nQr6TDmaieKNuuVD.$rigName -p x --rawintensity 1008 -w 8 --text-only

On RX480 4GB --rawintensity 1008 -w 8 is best - try it !

[citronick]

claymores 8.0 eth is causing me to get open cl   on and off sometimes 20 hours good .

sometimes 5 hours good.  only on the 8 card pandaminer.  and always card six.



next issue is mining eth and pasc

can we do this ?

I do not see it below.

Meanwhile, you can use this Phil.

EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal <yourETHaddress>.YourWorkerName -epsw x -dpool pasc-us-east1.nanopool.org:15555 -dwal <yourPASCaddress>.YourWorkerName -dcoin pasc

Claymore v8 may soon get v8.1, a number of miners has same symptoms -- see CDM thread.
Try using the -ethi command to control the intensity it may help. I use -ethi 1 (thats nearly lowest intensity to control wattage, overheating etc). ETH mining is always memory intensive and heavy duty. Expect the extra load when you dual mine PASCAL.

[philipma1957]

claymores 8.0 eth is causing me to get open cl   on and off sometimes 20 hours good .

sometimes 5 hours good.  only on the 8 card pandaminer.  and always card six.



next issue is mining eth and pasc

can we do this ?

I do not see it below.

Meanwhile, you can use this Phil.

EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal <yourETHaddress>.YourWorkerName -epsw x -dpool pasc-us-east1.nanopool.org:15555 -dwal <yourPASCaddress>.YourWorkerName -dcoin pasc

Claymore v8 may soon get v8.1, a number of miners has same symptoms -- see CDM thread.
Try using the -ethi command to control the intensity it may help. I use -ethi 1 (thats nearly lowest intensity to control wattage, overheating etc). ETH mining is always memory intensive and heavy duty. Expect the extra load when you dual mine PASCAL.

I set -ethi 5

I have a pasc at polinex there are two numbers one is for polinex one is for my load address.

So do I go .    Polxxx.load.

[citronick]

claymores 8.0 eth is causing me to get open cl   on and off sometimes 20 hours good .

sometimes 5 hours good.  only on the 8 card pandaminer.  and always card six.



next issue is mining eth and pasc

can we do this ?

I do not see it below.

Meanwhile, you can use this Phil.

EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal <yourETHaddress>.YourWorkerName -epsw x -dpool pasc-us-east1.nanopool.org:15555 -dwal <yourPASCaddress>.YourWorkerName -dcoin pasc

Claymore v8 may soon get v8.1, a number of miners has same symptoms -- see CDM thread.
Try using the -ethi command to control the intensity it may help. I use -ethi 1 (thats nearly lowest intensity to control wattage, overheating etc). ETH mining is always memory intensive and heavy duty. Expect the extra load when you dual mine PASCAL.

I set -ethi 5

I have a pasc at polinex there are two numbers one is for polinex one is for my load address.

So do I go .    Polxxx.load.

Mining to exchange with payment-ID and worker:

POLONIEXADDRESS.YOUR-PAYMENT-ID.WORKER

Examples:
86646.041fa63e8caa680c.rig1
86646-64.041fa63e8caa680c.rig1

No PC wallet

[twofreckles]

Great! hope you finish your work quick and return to OS development, in my case is very bad managing several clients with diferent email address... so this group feature is a must.

I will try starting more rigs on your OS after grouping is done.

Thank you

I second that one.

[fittsy]

I set -ethi 5

I have a pasc at polinex there are two numbers one is for polinex one is for my load address.

So do I go .    Polxxx.load.

You can always mine at Suprnova which uses a username.workername instead of a wallet address to mine. 

The account page on Suprnova has a good example of how to setup your withdrawals using Poloniex.

Payment Address. Syntax: 123456-12.payload For example Polo: 86646-64.aeb0b5fe99694894

86646-64 you'll find out is Poloniex's account number and the rest of that string after the . is your load address.

[reelen]

Will you please update Claymore Zcash 12.2?  Looking to use his option for 12.0 settings as 12.1 isnt completely stable.

[tytanick]

UPDATE v1071:
- claymore-zec updated to 12.2
note. you need to reload miner/reboot to start working

[citronick]

UPDATE v1071:
- claymore-zec updated to 12.2
note. you need to reload miner/reboot to start working

Hi Tytanick,

Please add/replace/update latest sgminer-gm-NH-5.5.5-8

Thanks!

[tytanick]

Hi Tytanick,

Please add/replace/update latest sgminer-gm-NH-5.5.5-8

Thanks!

Can you give link to binary ? I could not fint it early this morning.

[citronick]

Hi Tytanick,

Please add/replace/update latest sgminer-gm-NH-5.5.5-8

Thanks!

Can you give link to binary ? I could not fint it early this morning.

https://github.com/nicehash/sgminer-gm/releases

Note: dont forget to compile the correct version... 

[philipma1957]

Okay looks like I got the pandaminer stable mining eth and pasc

I am using claymore-eth v8.0

https://simplemining.net/#minerOptions5


the key was intensity

-epool stratum+tcp://us1.ethpool.org:3333 -ewal 0x3ef297e47404a771139472b93621f82c8a832857.Simple -esm 0 -epsw x -allpools 1 -mport -3333 -ethi 4 -dpool stratum+tcp://pasc-eu1.nanopool.org:15555 -dwal 86646-64.d3c2c1e866a79ef4.simple -dpsw x -dcoin pasc -allpools 1 -mport 3333 -dcri 11

note intensity settings

stable so far and a loss of 4% eth  hash giving me about 2600mh of pascal

[citronick]

Tytanick,

The best ZEC miner out there latest version released

Optiminer v1.7.0 released!

[1.7.0] New --pci-modes (0-3). Try if you see GPU freezes.
[1.7.0] Reduced CPU utilization.
[1.7.0] Small performance improvement ~1%.

ZCash miner for AMD GCN cards.

Download: https://github.com/Optiminer/OptiminerZcash

[tytanick]

UPDATE v1072:
- optiminer-zec v1.7
- sgminer-gm-nh-5.5.5-8
note. you need to reload rig to start using this version.