PandaMiner B3 Pro New Batch Releases with Only $800-$1750!!!!

[PandaMiner@official]

Thanks , we will take it into consideration!
we have to admit there is jet lag between different country, also time delay for the emails.
Maybe we will set different release time for China and abroad and try to be fair to all the people.

[citronick]

Thanks , we will take it into consideration!
we have to admit there is jet lag between different country, also time delay for the emails.
Maybe we will set different release time for China and abroad and try to be fair to all the people.

Dear Pandaminer team,

How are you guys doing?

To be able to get Pandaminer branding world wide (domestic and international markets) - consider having a quota for each market so that everyone have a chance to buy.

To remind Pandaminer team and your management, this Bitcointalk thread has done a fair bit of PR for you in the first round of pre sales of B1. You can check many postings by Zoey to introduce Pandaminer unfortunately got many negative reviews and some say your product is a scam etc. etc.

Getting senior and experienced reviewer like Philipma1957 for example, I bet have got many many miners across the world interested on your product. I am shocked actually that a 470/B3 version that Philip has also favored during his review of the 480/B1... he was not even reserved a unit for review. Sad. How sad...

Anyways, many room for improvement for your future sales and I hope many lessons learnt for your company. I am sure your company will improve the sales process for international buyers too.

Looking forward to get a few B3s whenever it becomes available again.

Thanks

citronick

[philipma1957]

I for one am glad they sold out.

They made good gear and deserve to make profit.

@ panda miner. Since you sold it all how about a new run?

Maybe the next time limit 1/2 the batch to small sales.

@ everyone the fact they sold out so quickly shows the interest in gpu mining is strong.

This is good for all of us miners.

To be frank I would have liked one maybe someone from the company could have emailed me.

Hi, Philip, we will release a new run and new batch, but we are not sure about the exact time, we will tell you all the exact time when we decided.
Thanks so much for your support!

Put one on the side for me. Please.  They are selling like mad and I understand why you sold out as turning down an order of 300 or 400 machines would not be easy.

I am sending a pm now.

pm sent

[Eliovp]

I really hope they will send the next batch or whatever in a decent state.

I recieved my pandaminer (not b3) last week, full of dust, scratches, clearly been used for a significant period of time.. (and i know i'm not the only one....)

Not very professional if you ask me.


Then i got a private message from someone else who recieved his panda with 3 heatsinks completely loose....

I was very happy with my very first order, arived here in time, in perfect condition and still running smooth.

But to be honest, i'm not sure if i'm going to reorder anything else after haven seen this.


Lets hope they turn around and start working on their marketing skills and perhaps some decent English  

A shitload of potential here, lets hope they make something out of it..

[deadsix]

A shitload of potential here, lets hope they make something out of it..

Before whatever that jstenfanop is building makes them irrelevant

[Eliovp]

A shitload of potential here, lets hope they make something out of it..

Before whatever that jstenfanop is building makes them irrelevant

I've seen what he's been working on.
Not bad, but i prefer a 6xgpu rig over a 10x rig any day. (Non MXM GPU's)
Yeah yeah, i know, more mobo's, etc.. but if i have a rig down, i don't have 10+ cards down.


Plus, this (pandaminer) is interesting because of the MXM gpu's and their power efficienty,
i believe what jstefanop is doing is basically a pci splitter..?.. based for Regular GPU's.. (correct me if i'm wrong) and so kind of irrelevant in comparison with this project.

[deadsix]

A shitload of potential here, lets hope they make something out of it..

Before whatever that jstenfanop is building makes them irrelevant

I've seen what he's been working on.
Not bad, but i prefer a 6xgpu rig over a 10x rig any day. (Non MXM GPU's)
Yeah yeah, i know, more mobo's, etc.. but if i have a rig down, i don't have 10+ cards down.


Plus, this (pandaminer) is interesting because of the MXM gpu's and their power efficienty,
i believe what jstefanop is doing is basically a pci splitter..?.. based for Regular GPU's.. (correct me if i'm wrong) and so kind of irrelevant in comparison with this project.

More like a custom pcb that has full length PCIe slots to fit regular cards on it. and not just 10, upto 16 if his plans go well.
So its basically like the custom board that pandaminer has, only for regular desktop grade graphics cards. I'd say that's direct competition, but it will most definitely be more expensive.
PS: I haven't seen it but this is my impression of what he is building is, judging by what conversations I have had/read.

[zzzzzzzzzz]

A shitload of potential here, lets hope they make something out of it..

Before whatever that jstenfanop is building makes them irrelevant

I've seen what he's been working on.
Not bad, but i prefer a 6xgpu rig over a 10x rig any day. (Non MXM GPU's)
Yeah yeah, i know, more mobo's, etc.. but if i have a rig down, i don't have 10+ cards down.


Plus, this (pandaminer) is interesting because of the MXM gpu's and their power efficienty,
i believe what jstefanop is doing is basically a pci splitter..?.. based for Regular GPU's.. (correct me if i'm wrong) and so kind of irrelevant in comparison with this project.

I totally agree. Talk about putting all your eggs in one basket! Then there's the stability question. No thanks. 6xGPUs works well.

On the B3+: rx470s? Really? $100 less for a lot less hash rate (Zcash)? Makes no sense to me, although perhaps I'm missing something?

[philipma1957]

I really hope they will send the next batch or whatever in a decent state.

I recieved my pandaminer (not b3) last week, full of dust, scratches, clearly been used for a significant period of time.. (and i know i'm not the only one....)

Not very professional if you ask me.


Then i got a private message from someone else who recieved his panda with 3 heatsinks completely loose....

I was very happy with my very first order, arived here in time, in perfect condition and still running smooth.

But to be honest, i'm not sure if i'm going to reorder anything else after haven seen this.


Lets hope they turn around and start working on their marketing skills and perhaps some decent English  

A shitload of potential here, lets hope they make something out of it..

too bad  if that is the direction they are headed.

I am a third generation American  so I am just an English speaking  guy.

But my wife is first generation American  her parents first language was Italian  and my wife has more then 100 relatives that I have meet that speak Italian first English second.

 There are language barrier issues , custom issues.  We effort to get along and for the most part it works out.


This is a very simple thing happening  in the world of  crypto coins.

 As of today  the pandaminer  earns more  btc then 3 s-9s and uses far less power and costs much less.

No one knows  what will be in a week  but today  the pandaminer is a king.

[dagarair]

yeah panda is king.  I build rigs and i made an 8 card but damn i can almost fit 4 pandas where that thing sits.  mxm to me while harder to upgrade, is not impossible.  Yes you cant go to newegg and order one but I can confirm AMD has said the mxm socket will be around for AT LEAST 5 more years.  I know where to order those OEM so i'm happy.

At the pricepoint they are at, its a killer of anyone selling rigs.  You should be glad they are sold out if you sell them.

[philipma1957]

yeah panda is king.  I build rigs and i made an 8 card but damn i can almost fit 4 pandas where that thing sits.  mxm to me while harder to upgrade, is not impossible.  Yes you cant go to newegg and order one but I can confirm AMD has said the mxm socket will be around for AT LEAST 5 more years.  I know where to order those OEM so i'm happy.

At the pricepoint they are at, its a killer of anyone selling rigs.  You should be glad they are sold out if you sell them.

Yeah  and it is amazing  what they are earning on nicehash.

 Eth converted to btc  .023-.024 btc a day  close to 3 a card yeah power  so $2.50 a card

[DebitMe]

Talking with PandaMiner they can ensure that I get units in the next batch with an order of at least 30, is anyone interested in going in to hit that target to ensure we get units?

[zzzzzzzzzz]

Talking with PandaMiner they can ensure that I get units in the next batch with an order of at least 30, is anyone interested in going in to hit that target to ensure we get units?

Is that for the B3+ or B1+? I'd be interested if it was the B1+.

[SonofLiberty90]

Talking with PandaMiner they can ensure that I get units in the next batch with an order of at least 30, is anyone interested in going in to hit that target to ensure we get units?

Interested in buying one B3.

How may are you planning to buy? Let me know when you're ready to order.

[bentcrypto]

Talking with PandaMiner they can ensure that I get units in the next batch with an order of at least 30, is anyone interested in going in to hit that target to ensure we get units?

Yes, please put me down for 6.

[bittawm]

Talking with PandaMiner they can ensure that I get units in the next batch with an order of at least 30, is anyone interested in going in to hit that target to ensure we get units?

Yes, please put me down for 6.

there is already more batches coming out without this special order

[DebitMe]

Talking with PandaMiner they can ensure that I get units in the next batch with an order of at least 30, is anyone interested in going in to hit that target to ensure we get units?

Yes, please put me down for 6.

there is already more batches coming out without this special order

Yes, but like the last one, they are small batches of 500 or so, and will probably be sold out within an hour or two, which doesn't give the little guy much time to get in, especially if they release them when the Western world is overnight.  This will guarantee we are in the next batch.

[MrN4body]

i'd be up for 1 too, i assume you just put our names into the group and we purchase them ourselfs, right?

[DebitMe]

i'd be up for 1 too, i assume you just put our names into the group and we purchase them ourselfs, right?

Not sure, was checking if there was interest first.  I don't know if we would pay individually or if they would want it all coming from me.  I will double check that and include the info if I decide to move forward with doing this.

[MrN4body]

ok, thanks for the reply, also thanks for trying to get something going, appriciate it