delle54
|
|
November 16, 2016, 12:41:22 AM Last edit: November 16, 2016, 12:55:40 AM by delle54 |
|
So we can switch from ETH to Z-cash miner and back and forth quickly. That's not Claymore's job. The pool can do that for you. Look at miningpoolhub.com for example.
|
|
|
|
delle54
|
|
November 16, 2016, 12:44:03 AM |
|
With v6.0, my 280X cards are getting ~122H/s each. I know that. That's my problem.
|
|
|
|
maxmad_x
Sr. Member
Offline
Activity: 546
Merit: 250
It takes a lot to build but not much to lose
|
|
November 16, 2016, 12:53:15 AM |
|
So we can switch from ETH to Z-cash miner and back and forth quickly. That's not Claymore's job. The pool can do that for you. Look at miningpool.com for example. Dude, ETH and Zcash use 2 different algo. 2 different miner. WE have 1 manager and 2 miners. I am asking for creating a switch in the remote manager to stop zcash mining and ETH or the other way. I guess you are not understanding what I am trying to say.
|
|
|
|
maxmad_x
Sr. Member
Offline
Activity: 546
Merit: 250
It takes a lot to build but not much to lose
|
|
November 16, 2016, 12:54:20 AM |
|
280x ~120 H/s 480 ~160 H/s 290x ~166 H/s 390 ~180 H/s fury ~200 H/s win7 x64 16.10.3 driver all stock bios with over clocks i feel this gpus can still hash higher, temps are have not gone up What is your power usage on the cards? Please can you tell the GPU-z wattage values? Thank you
|
|
|
|
jddebug
|
|
November 16, 2016, 12:58:20 AM |
|
v6.0:
- improved speed by about 20-25% (depends on card model). About 180H/s on stock 390. - "-i" parameter values are 0...4 now, default value is "-i 4". - fixed issue with mixed cards.
Claymore, Suggestion. Can you add a combined folder with ETH miner and Zcash miner and add a switch in the Remote manager? So we can switch from ETH to Z-cash miner and back and forth quickly. Thank you so much for your amazing work. If switch happens , I dont mind paying 2.5% for both ETH and Zcash mining. Great work I'd like to second this request.
|
|
|
|
Billyboy4022
|
|
November 16, 2016, 01:02:31 AM |
|
Windows 10 Driver 16.9.2 Gigabyte 280x 2.0 1000/1500 @ 1.094v (under Volted)
6.0 ~115 H/s
|
|
|
|
Chuck_Norris
Newbie
Offline
Activity: 19
Merit: 0
|
|
November 16, 2016, 01:04:46 AM |
|
My first post. 4- rx470-8gb nitro 162-163 sol/s each rock solid. 1350 core, 2090 mem, 1625 Strap, -20mv 100tdp in bios 100 watts gpu-z 1 rx480-8gb ref @ only 150 sols.
I just tried raising my core to 1350 which i didn't think would be stable but is so far. I need to start lowering mV again. 1. What do you think i should expect as far as getting my -mV down lower. 2. How do i get my rx480-8gb ref high. 3. I soft bricked my rx480-4gb ref after strap mod. I think it has something to do with driver sigs or something. I can jump it to start and reflash stock bios but wont work.Help? 4.I tried 1500 strap on rx470 but seems very unstable and cant adjust clocks much any idea why? 5. Thank you Claymore. Every version has been great. 2.5% doesn't even cross my mind. Thanks again! Im in shock with the quick and stable releases.
Any and all help is much appreciated. Have been mining for years.
Your Crypto Friend ~Chuck
|
|
|
|
maxmad_x
Sr. Member
Offline
Activity: 546
Merit: 250
It takes a lot to build but not much to lose
|
|
November 16, 2016, 01:07:17 AM |
|
My first post. 4- rx470-8gb nitro 162-163 sol/s each rock solid. 1350 core, 2090 mem, 1625 Strap, -20mv 100tdp in bios 100 watts gpu-z 1 rx480-8gb ref @ only 150 sols.
I just tried raising my core to 1350 which i didn't think would be stable but is so far. I need to start lowering mV again. 1. What do you think i should expect as far as getting my -mV down lower. 2. How do i get my rx480-8gb ref high. 3. I soft bricked my rx480-4gb ref after strap mod. I think it has something to do with driver sigs or something. I can jump it to start and reflash stock bios but wont work.Help? 4.I tried 1500 strap on rx470 but seems very unstable and cant adjust clocks much any idea why? 5. Thank you Claymore. Every version has been great. 2.5% doesn't even cross my mind. Thanks again! Im in shock with the quick and stable releases.
Any and all help is much appreciated. Have been mining for years.
Your Crypto Friend ~Chuck
if driver signing is the problem, install crimson 16.9 or later. The driver signing has been removed so you should not worry about running "test mode on" or "modified .sys file" Btw is your memory Hynix or Samsung? Btw what is your CPU for 4 RX470 rig? That matters a lot too.
|
|
|
|
TheRider
|
|
November 16, 2016, 01:08:39 AM |
|
Stock 295x2, -i 4, 1100/1500, 320 H/s Stock Nitro 470 8G, -i 4, 1350/2100, 155 H/s
In the 295x2, your running 1100 clock, 1500 mem and how about power limit? I have same card and getting 290ish. 0%. Haven't touched power limit. I use TRIXX to overclock. This is on Win7 x64 Ultimate, Crimson 16.10.1 if that helps. Temps are 70C and 67C, ambient 26C. Maybe your card is throttling? How's your temps?
|
|
|
|
bmtrader
Newbie
Offline
Activity: 31
Merit: 0
|
|
November 16, 2016, 01:10:28 AM |
|
Hey, after I switched from zcash to eth claymore miner all of my rigs giving me can't allocate dag (-4) ?? any idea what happened (all variables are set, I mined eth before zcash)
|
|
|
|
Chuck_Norris
Newbie
Offline
Activity: 19
Merit: 0
|
|
November 16, 2016, 01:11:12 AM |
|
Im running the newest version of crimson and tried a bunch of different driver installs. I get no video unless i jump it i'm pretty sure. I'm sending in for RMA i don't want to mess with it anymore. Spent 8 hours messing with it already. Stock rom is back on there. They shouldn't figure out it was flashed. I'm using an i7 4770k. And a 3rd gen i5 something K with similar results
|
|
|
|
arielbit
Legendary
Offline
Activity: 3416
Merit: 1059
|
|
November 16, 2016, 01:12:11 AM |
|
280x ~120 H/s 480 ~160 H/s 290x ~166 H/s 390 ~180 H/s fury ~200 H/s win7 x64 16.10.3 driver all stock bios with over clocks i feel this gpus can still hash higher, temps are have not gone up What is your power usage on the cards? Please can you tell the GPU-z wattage values? Thank you gpu-z don't show watts in sensors to my fury, 290x, 390 and sapphire dualx 280x vaporx peaks at 82w and the 480's peaks at 100w something, they are fluctuating.
|
|
|
|
maxmad_x
Sr. Member
Offline
Activity: 546
Merit: 250
It takes a lot to build but not much to lose
|
|
November 16, 2016, 01:13:34 AM |
|
280x ~120 H/s 480 ~160 H/s 290x ~166 H/s 390 ~180 H/s fury ~200 H/s win7 x64 16.10.3 driver all stock bios with over clocks i feel this gpus can still hash higher, temps are have not gone up What is your power usage on the cards? Please can you tell the GPU-z wattage values? Thank you gpu-z don't show watts in sensors to my fury, 290x, 390 and sapphire dualx 280x vaporx peaks at 82w and the 480's peaks at 100w something, they are fluctuating. Thanx. GPU-z on RX480 you can click on the Watts sign and it will show min, max, avg etc .. set it at avg and just wait for 1 min to get good average value. Just 2 cents
|
|
|
|
Nippy-ua
Newbie
Offline
Activity: 48
Merit: 0
|
|
November 16, 2016, 01:14:09 AM |
|
Linux version
|
|
|
|
maxmad_x
Sr. Member
Offline
Activity: 546
Merit: 250
It takes a lot to build but not much to lose
|
|
November 16, 2016, 01:15:43 AM |
|
Im running the newest version of crimson and tried a bunch of different driver installs. I get no video unless i jump it i'm pretty sure. I'm sending in for RMA i don't want to mess with it anymore. Spent 8 hours messing with it already. Stock rom is back on there. They shouldn't figure out it was flashed. I'm using an i7 4770k. And a 3rd gen i5 something K with similar results
Those are impressive stats. Yes you are using a good processor so higher hashrate is expected. Did you use DDU to clear every trace of driver before installing Crimson 16.10.3?
|
|
|
|
maxmad_x
Sr. Member
Offline
Activity: 546
Merit: 250
It takes a lot to build but not much to lose
|
|
November 16, 2016, 01:16:14 AM |
|
Hey, after I switched from zcash to eth claymore miner all of my rigs giving me can't allocate dag (-4) ?? any idea what happened (all variables are set, I mined eth before zcash)
Reboot in between. Clears the brains out of GPUs
|
|
|
|
RobertD
Newbie
Offline
Activity: 42
Merit: 0
|
|
November 16, 2016, 01:20:46 AM |
|
What are the fastest Windows 10 x64 Radeon drivers for 290/x? Windows 10 installs 16.6 by default.
|
|
|
|
arielbit
Legendary
Offline
Activity: 3416
Merit: 1059
|
|
November 16, 2016, 01:22:55 AM |
|
280x ~120 H/s 480 ~160 H/s 290x ~166 H/s 390 ~180 H/s fury ~200 H/s win7 x64 16.10.3 driver all stock bios with over clocks i feel this gpus can still hash higher, temps are have not gone up What is your power usage on the cards? Please can you tell the GPU-z wattage values? Thank you gpu-z don't show watts in sensors to my fury, 290x, 390 and sapphire dualx 280x vaporx peaks at 82w and the 480's peaks at 100w something, they are fluctuating. Thanx. GPU-z on RX480 you can click on the Watts sign and it will show min, max, avg etc .. set it at avg and just wait for 1 min to get good average value. Just 2 cents correction, its my sapphire dual x 280x that is displaying watts not the vapor x gpu-z sensor watts: 280x is about 60w (average) 480 is about 80w (average)
|
|
|
|
bmtrader
Newbie
Offline
Activity: 31
Merit: 0
|
|
November 16, 2016, 01:23:34 AM |
|
Hey, after I switched from zcash to eth claymore miner all of my rigs giving me can't allocate dag (-4) ?? any idea what happened (all variables are set, I mined eth before zcash)
Reboot in between. Clears the brains out of GPUs I tried, also I tried power off/on - same thing... they do not work
|
|
|
|
delle54
|
|
November 16, 2016, 01:23:52 AM |
|
Linux version NEVER!!!Use SilentArmy.
|
|
|
|
|