misho93
Newbie
 Offline
Activity: 16
Merit: 0
|
 |
November 21, 2016, 03:28:27 AM |
|
Claymore
Is there a version of your miner that will work with my HD 6990 cards (essentially 2 6950 or 6970 GPUs on one card)? And if so, what must I do to obtain it, and set it up for my cards?
The AMD driver site said the newest Catalyst my cards could run is 15.9 (not 15.12). When I ran them a couple years ago, they were mining with Catalyst 14.6 (on a mining OS called PIMP-1.5.4-amd-14.6-r2). I am disabled, and have a limited income, and therefore must run what I have. Thank you.
I have a 6990. Use drivers 15.7 And mine ETH with it with his miner software not ZEC. ZEC will run at 2Sol/s per core so 4Sol/s. With ETH you will get 13MH/s each so 26MH/s total. Almost the speed of RX480 & 390 just uses alot of power. You can also undervolt them to like 1.0V to save on heat and power. how it work with ETH ? what miner? i know the 6690 have to gpu 6970 with 2gb vram and 6970 with 2gb vram that meaning can mining ETH with 2gb vram or on vga like 6950 and 6970? |
|
|
|
|
|
|
|
|
|
|
|
|
|
"If you don't want people to know you're a scumbag then don't be a scumbag." -- margaritahuyan
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
fr4nkthetank
Legendary
Offline
Activity: 2294
Merit: 1182
Now the money is free, and so the people will be
|
|
November 21, 2016, 04:00:26 AM |
|
Dear Claymore. Thanks again for a great program.
Question please. Should the start.bat file for the Zcash miner use the SET or SETX at the top before each GPU_**** statement?
Thanks in advance
doesnt really matter, maybe you dont even need to set commands. but set is temporary, and setx is global. so both work perfect. |
|
|
|
|
sorry2xs
Legendary
Offline
Activity: 924
Merit: 1000
Dark Passenger Bitcoin miner 2013,Bitcoin node
|
|
November 21, 2016, 04:36:05 AM |
|
is there a way to use the built in graphics adapter for monitor purposes only and mine with the other cards
|
Please tip the Node 1MPWKB23NsZsXHANnFwVAWT86mL24fqAjF; KO4UX
THAT NO GOOD DO GOODER BAT!!!
|
|
|
fmz89
Legendary
Offline
Activity: 1766
Merit: 1002
|
|
November 21, 2016, 05:18:17 AM |
|
try nanopool i increased earning about 10% on nanopool best pool ever and for 18000 accepted share there is 0 rejected shares
yeah 0 rejected but fuking less share flypool, 1-5% rejected but full share any good pool out there? |
|
|
|
|
Xardas2014
|
|
November 21, 2016, 05:18:29 AM |
|
is there a way to use the built in graphics adapter for monitor purposes only and mine with the other cards
Yes, connect through HDMI or whatever connections your monitor and mobo supports and set up in your bios to use it that way. Then in the mining software use the -di command to point the miner to the cards. |
|
|
|
|
|
oslak
|
|
November 21, 2016, 05:56:46 AM |
|
Which is the least paying pool?
suprnova
coinmine.pl
pool.mn
flypool?
|
|
|
|
|
|
ffthomas
|
|
November 21, 2016, 06:14:01 AM |
|
Which is the least paying pool?
suprnova
coinmine.pl
pool.mn
flypool?
Based on my experience I suggest to use flypool. I dont't know which is the least paying. |
|
|
|
|
snakey
Legendary
Offline
Activity: 1386
Merit: 1001
|
|
November 21, 2016, 06:33:32 AM |
|
These mining farms are massive, the older cards they have are now getting better speeds then the new RX470 / 480 cards that new miners have bought...
Claymore can really help out by improving the new cards speed to allow us smaller miners to get better rewards against these massive farms.
|
|
|
|
|
|
ffthomas
|
|
November 21, 2016, 07:01:30 AM |
|
These mining farms are massive, the older cards they have are now getting better speeds then the new RX470 / 480 cards that new miners have bought...
Claymore can really help out by improving the new cards speed to allow us smaller miners to get better rewards against these massive farms.
I think the major part of the miners have older cards too. That is the reason why Claymore improves hashrate on the older (and less efficient) cards first. I have no doubt that Claymore will optimize his miner for the Polaris GPUs soon. |
|
|
|
|
Nthused
Legendary
Offline
Activity: 1554
Merit: 1001
|
|
November 21, 2016, 07:45:24 AM |
|
175-180sol/s average on both my AMD 280x GPU's
One is cooler than the other though, the Gigabyte version gets hotter & the fan spins up more then the Sapphire version does, both are on stock bios and use stock settings with -i 4 (Default)
|
|
|
|
|
ravikiranb1985
Newbie
Offline
Activity: 9
Merit: 0
|
|
November 21, 2016, 07:47:19 AM |
|
try nanopool i increased earning about 10% on nanopool best pool ever and for 18000 accepted share there is 0 rejected shares
yeah 0 rejected but fuking less share flypool, 1-5% rejected but full share any good pool out there? yes less share but high payout i have two rigs tried fllypool 0.21 zec/day and 2% rejected shares difficulty 1000h and now using nanopool i am getting 0.28/day zec and 0.1% rejected shares difficulty 3200h |
|
|
|
|
|
nowaltcoin
|
|
November 21, 2016, 08:05:41 AM |
|
thx a lot to claymore !
Now the V7 is running on my older cards with 1 GB. ( 6 * 7790)
I'am at this point
Testnotebook 12,5 Sol/s ( 3,9 Sol to 12,5 Sol) V1.0 to V7.0
6* 7790 1GB 365 Sol/s (32 Sol to 365 Sol) nheqminer 0.4b to V7.0 now using 400 Watt from the wall (375 watt with nheqminer)
Great job claymore
|
8 * Blackarrow Prospero at Low-Voltage mining @ ckpool.org 12 * GPU's mining ETN/Sumocoin You like to mine something different: https://deutsche-emark.de/ |
|
|
Zzsdr
Newbie
Offline
Activity: 17
Merit: 0
|
|
November 21, 2016, 08:38:39 AM |
|
Hello all
Can any one tell us 290x clock and memory settings to get best zec hash rate
Also I want to know 280x setting
SAP R9 290X TRI-X 8GB (1040/1400/-31mV) - 210.807 H/s (can perform better) MSI R9 390X GAMING 8GB (1100/1500/-31mV) - 240.956 H/s SAP R9 390X NITRO OC 8GB (1100/1500/-31mV) - 240.293 H/s SAP R9 390 NITRO OC 8GB (1100/1500/-31mV) - 227.941 H/s min.925 - max.1120W stock bioses and Auto fans with custom curve via MSI Aferburner 4.3.0 H97 Anvrs, G1840, 8GB RAM, 80GB HDD, 16GB swap, Win7-64, crimson 15.12, Claymore's ZCash AMD GPU Miner v7.0 For stock hawaii DPM4 normally works, add -100mV + mem 1125/ 1250 and you will see some nice power savings. Performance hit is normally 10-15% but that is not a problem with these profitability levels. Antantti thanks for your advise! |
|
|
|
|
|
oslak
|
|
November 21, 2016, 08:52:53 AM |
|
175-180sol/s average on both my AMD 280x GPU's
One is cooler than the other though, the Gigabyte version gets hotter & the fan spins up more then the Sapphire version does, both are on stock bios and use stock settings with -i 4 (Default)
power consumption? |
|
|
|
|
BenCodie
Legendary
Offline
Activity: 1638
Merit: 1036
6.25 ---> 3.125
|
|
November 21, 2016, 10:39:18 AM |
|
if anyone have Asus Dual OC Edition RX 480 4GB.
can he share h/s on zec
|
|
|
|
|
vydelek
Newbie
Offline
Activity: 73
Merit: 0
|
|
November 21, 2016, 10:49:36 AM |
|
Please Clay,
You can program up MINER MANAGER preview GPU MEMORY?
That videos Mhz clock???
|
|
|
|
|
|
jonid
|
|
November 21, 2016, 11:45:18 AM |
|
I'm looking at my crystal ball now.... it shows we're gonna get a new miner release in a few hours..
|
|
|
|
|
|
ffthomas
|
|
November 21, 2016, 11:52:44 AM |
|
Anybody knows what the "-benchmark" option is? I didn't find it in the options list/description.
|
|
|
|
|
|
mewhoyou
|
|
November 21, 2016, 11:55:00 AM |
|
I'm looking at my crystal ball now.... it shows we're gonna get a new miner release in a few hours..
either you need to get a refund or you need to tell me where you got that crystal ball from... |
Ethereum the Next Big Thing?
|
|
|
|
jonid
|
|
November 21, 2016, 11:59:08 AM |
|
I'm looking at my crystal ball now.... it shows we're gonna get a new miner release in a few hours..
either you need to get a refund or you need to tell me where you got that crystal ball from... I got it from saruman the wise... LOL |
|
|
|
|
|
