Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[husn]

last night i use claymore V7 and look what happens in my Main board !!!!!
why this thing are happen?
http://s6.uplod.ir/i/00838/0fj82m8pu86v.jpg
all earlier versions was good and no problem with them,but last night after changing the claymore version to V7,this is happend

Maybe your setup sucked from the start?

how much experience do you have setting up these rigs?

what hardware are you using all together?

Maybe it's easier to pinpoint your error than putting the blame on a dev?

thousands of users are running this.

thanks!

maybe your right , but all version about 1 month is working good.when im changing my claymore to V7 this is happen .
CPU G630
4X RX480 RADEON 8GB
4GB RAM
MAIN biostar h61b
PS : 1350 Wat

[1714695302]

1714695302

[1714695302]

1714695302

[1714695302]

1714695302

[cptfisher]

ps 1350w means nothing... you need tell brand  of psu ... hope is not any of those made by Uncle Lao or granny Maà or daddy Fu ...

i mean i hope you not using china cheap shit ...

[chisefu]

Yo Canucks

http://www.newegg.ca/Product/Product.aspx?Item=N82E16814202206&ignorebbr=1

$180 dollar r9 380's half off

[husn]

ps 1350w means nothing... you need tell brand  of psu ...

pls look this link.its my PSU
http://www.green-case.com/products/power/power.php?model=GP1350B-OC_Plus

[FlensGold]

last night i use claymore V7 and look what happens in my Main board !!!!!
why this thing are happen?

all earlier versions was good and no problem with them,but last night after changing the claymore version to V7,this is happend

Are you using powered risers?

PCI-E 1x to 16x riser cable

If it is not powered the GPU does draw the necessary power from Mainboard. Since that 20(24) Pin Connector is powering the Mainboard everything is drawn through it.
Powered risers are always useful if you use multiple GPUs.

[husn]

last night i use claymore V7 and look what happens in my Main board !!!!!
why this thing are happen?
http://prntscr.com/d9cki4
all earlier versions was good and no problem with them,but last night after changing the claymore version to V7,this is happend

Are you using powered risers?

PCI-E 1x to 16x riser cable

If it is not powered the GPU does draw the necessary power from Mainboard. Since that 20(24) Pin Connector is powering the Mainboard everything is drawn through it.
Powered risers are always useful if you use multiple GPUs.

i dont know,  what i most to do?!!!!!!!

[aaronsace]

last night i use claymore V7 and look what happens in my Main board !!!!!
why this thing are happen?

all earlier versions was good and no problem with them,but last night after changing the claymore version to V7,this is happend

Maybe your setup sucked from the start?

how much experience do you have setting up these rigs?

what hardware are you using all together?

Maybe it's easier to pinpoint your error than putting the blame on a dev?

thousands of users are running this.

thanks!

maybe your right , but all version about 1 month is working good.when im changing my claymore to V7 this is happen .
CPU G630
4X RX480 RADEON 8GB
4GB RAM
MAIN biostar h61b
PS : 1350 Wat

This is nothing to do with software. Running software does not blow up your computer! Bad hardware pushed to it's limits is why computers blow up. Please don't post irrelevant topics in this thread; start your own.

[FlensGold]

last night i use claymore V7 and look what happens in my Main board !!!!!
why this thing are happen?

all earlier versions was good and no problem with them,but last night after changing the claymore version to V7,this is happend

Are you using powered risers?

PCI-E 1x to 16x riser cable

If it is not powered the GPU does draw the necessary power from Mainboard. Since that 20(24) Pin Connector is powering the Mainboard everything is drawn through it.
Powered risers are always useful if you use multiple GPUs.

i dont know,  what i most to do?!!!!!!!

Simply use powered Risers (like these or the USB versions.
Although the ASrock H81 Mainboard does provide additional Molex plugs for powering the GPUs you should better use powered risers.

[husn]

last night i use claymore V7 and look what happens in my Main board !!!!!
why this thing are happen?
http://prntscr.com/d9cki4
all earlier versions was good and no problem with them,but last night after changing the claymore version to V7,this is happend

Are you using powered risers?

PCI-E 1x to 16x riser cable

If it is not powered the GPU does draw the necessary power from Mainboard. Since that 20(24) Pin Connector is powering the Mainboard everything is drawn through it.
Powered risers are always useful if you use multiple GPUs.

i dont know,  what i most to do?!!!!!!!

Simply use powered Risers (like these or the USB versions.
Although the ASrock H81 Mainboard does provide additional Molex plugs for powering the GPUs you should better use powered risers.

thanks for help

[fr4nkthetank]

Best guess is each claymore version uses more and more power.  v7 vs v6 for rx470/480 uses 15% more power or so.  so you just went over the edge of what your motherboard could supply to your gpu's, and it was too much.  thats my guess.  so yes, the software caused the problem - B U T - it was an unsafe setup from the start and you didnt notice anything because the power draw want high enough.  good luck !

[ayiphelmy]

rx 480 8 gb powercolor red devil

on stock setting nope?
must be modded yeah?

look at rejects veersus up time and total shares

Yeah now i see 19 Rejects in 16sec
Thanks

This is stock bios.... reject show up when dev fee

[husn]

Best guess is each claymore version uses more and more power.  v7 vs v6 for rx470/480 uses 15% more power or so.  so you just went over the edge of what your motherboard could supply to your gpu's, and it was too much.  thats my guess.  so yes, the software caused the problem - B U T - it was an unsafe setup from the start and you didnt notice anything because the power draw want high enough.  good luck !

thanks,im going to change my MB.its old MB.ill try with a newer .

[delle54]

Best guess is each claymore version uses more and more power.

This is logical, since money is earned with electricity. The more H/s you achieve, the more money you make and use more power.

[Mugatu]

rx 480 8 gb powercolor red devil

on stock setting nope?
must be modded yeah?

look at rejects veersus up time and total shares

Yeah now i see 19 Rejects in 16sec
Thanks

This is stock bios.... reject show up when dev fee

wtf... I'm only getting 140h/s on those GPUs...

[delle54]

wtf... I'm only getting 140h/s on those GPUs...

177 is normal for 480 8GB. Must be your hardware.

[Mugatu]

wtf... I'm only getting 140h/s on those GPUs...

177 is normal for 480 8GB. Must be your hardware.

Could it be my sempron 145? It's not like its just 1 cpu, I'm running 4 of them...

[Stealth8368]

wtf... I'm only getting 140h/s on those GPUs...

177 is normal for 480 8GB. Must be your hardware.

Could it be my sempron 145? It's not like its just 1 cpu, I'm running 4 of them...

cpu should be ok now since Claymore fixed hi CPU usage a while back,have you disabled crossfire in watman software? Make sure you are running GPU at full clock speed to get these speeds and check your temps to make sure GPU not down clocking with to much heat

[delle54]

There are so many possible configurations, so that you must tell us EVERY detail before we can start to speculate or analyse.

[fr4nkthetank]

Best guess is each claymore version uses more and more power.  v7 vs v6 for rx470/480 uses 15% more power or so.  so you just went over the edge of what your motherboard could supply to your gpu's, and it was too much.  thats my guess.  so yes, the software caused the problem - B U T - it was an unsafe setup from the start and you didnt notice anything because the power draw want high enough.  good luck !

thanks,im going to change my MB.its old MB.ill try with a newer .

and usb powered risers my friend

[Mugatu]

There are so many possible configurations, so that you must tell us EVERY detail before we can start to speculate or analyse.

I don't feel like looking up the exact details 'cause I'm le lazy, and its already mining eth fine now.

Thanks for responding and attempting to help me