Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[ivomm]

PIC cables have nothing to do wit hit

its about drivers and overclocking

Do you want me to sent mine faulty risers to prove your theory is far from the reality?

[rozsada]

after reinstalling OS win7 my miner sees only 4 of 6 gpus.
Why?
Can anybody help me?

Did you use the 6 gpu mod?

try win10

I had win10 before - hangs
now i'd like to use win 7_64 - problems - only 4 cards (i have 6). After updating drivers - no cards.
miner does not start at all:
There is no openGL...

You should change your risers first of all. I had bad luck with shitty risers months ago. Sometimes the card appear sometimes not. I thought the problems were elsewere but after changing two (!) packs of risers finally
the problems dissapeared for good. The next thing is to use windows 8.1 64 bit, especialli if you have h81 mobo. They are really well optimised for this OS. Moreover, windows 10 will have bigger load on the cpu which can slow your cards when mining. In my case win 10 is above 90% whereas win 8.1 around 20%.

You should see 6 cards after the drivers install and 1 probably with an exclamation mark in the device manager. You need to run the 6 card mod to be able to mine with all 6.

You dont need to buy new risers. Look at thi solution, it works for me.
http://www.gobitgo.com/articles/1001/How-To-Correctly-Use-and-Install-PCI-E-Riser-Cables/

I've been mining for nearly a year. Of course I know about this page. Obviously you didn't have risers that work with their own will like mine did. Again: bad riser can cause the OS not to see the card in the Device manager, or you can see it randomly on restarts, or can work really poorly crashing the drivers at the end. This can't be checked with this page or any other methods except changing the risers. Believe me, I had 5-6 faulty risers (powered usb) ordered by ebay. Finally I ordered more expensive but really good risers from amazon and they do their job perfectly.

Under win10_64 - all cards are availible.
The next problems - stability and speed.
Now it is not stabil, hangs very often. I've reduce intensity from -i 8 down to -i 3.
If it is point of risers, how to know which of them causes this hanging?
Or there is another reason... any idea?

[roony]

Version 10 will be realesed today 

[Gambler8899]

Version 10 will be realesed today 

Is this a question without "?" or your wish?

[roony]

Version 10 will be realesed today 

Is this a question without "?" or your wish?

It isn't a question, claymore said in 30 December that he will realese new version 2-4 days, today is the last day to realese it

[un4given]

Version 10 will be realesed today 

Is this a question without "?" or your wish?

It isn't a question, claymore said in 30 December that he will realese new version 2-4 days, today is the last day to realese it

don't you think claymore would like to have a vacation or smth.? why spam such comments m8. a delay could occur easily. people can read without your assistance and calculate the ETA.

[Claymore]

Version 10 will be realesed today  

Is this a question without "?" or your wish?

It isn't a question, claymore said in 30 December that he will realese new version 2-4 days, today is the last day to realese it

Check my messages history carefully, I said it for XMR miner, not for ZEC miner

[golden0707]

Hello friends! Want to play with diff option in miner to set my own diff. What is the best values for 4 280xs ( 860 h/s) and 3 rx 470s ( 660 h/s) ?

Thanks for any advice.

It is about 1500 for your 4x280x or 1200 for your 3x 470. It is about twice of your hash speed. But it also depends on your network latency.

Thanks for the advice.

BR.

[laik2]

Version 10 will be realesed today  

Is this a question without "?" or your wish?

It isn't a question, claymore said in 30 December that he will realese new version 2-4 days, today is the last day to realese it

Check my messages history carefully, I said it for XMR miner, not for ZEC miner

Hi,
Will there be Linux version?
EDIT: Any plans to support NVIDIA+Cryptonight?

[shadabahmed]

guys which pool u r using, cause dwarf is giving too low earnings from last 3 days

[un4given]

guys which pool u r using, cause dwarf is giving too low earnings from last 3 days

have been on suprnova.cc for 10 weeks now. very good earnings. switched from flypool and nanopool, since it seemed they were stealing shares.

[golden0707]

guys which pool u r using, cause dwarf is giving too low earnings from last 3 days

have been on suprnova.cc for 10 weeks now. very good earnings. switched from flypool and nanopool, since it seemed they were stealing shares.

Same here. Moved to suprnova from 3 different pools. Only here is more true to calculation.

[ans34]

There is a problem with Zclassic mining. With allpools 1 option at zcl.coinmine.pl when miner tries to mine devfee it tries to coonect with ssl, but there is no ssl support at zcl.coinmine. How i can avoid this?

v9.3 and "-allpools 1" will work.

i tried that on v9.3. With -allpools 1 it still tries to connect with ssl. Found only 1 working setup for zclassic - use nofee

[rpg]

guys which pool u r using, cause dwarf is giving too low earnings from last 3 days

have been on suprnova.cc for 10 weeks now. very good earnings. switched from flypool and nanopool, since it seemed they were stealing shares.

Same here. Moved to suprnova from 3 different pools. Only here is more true to calculation.

just switch to dwarf now. 7 hours without a block is time for it to catch up.

[rpg]

Just put this video card mining expectations together based on posters info. It may or may not include OC settings. Please add or correct as you see fit

7950 - 225
7970 - 220
7990

270
270x
280 - 195
280x - 235
290  - 290
290x - 320
370
370x
380
380x
390  - 310
390x - 350

470 4g - 208
470 8g
480 4g
480 8g - 245

GTX 1060 - 250
GTX 1070
GTX 1080

[Famnant]

Just put this video card mining expectations together based on posters info. It may or may not include OC settings. Please add or correct as you see fit

7950 - 225
7970 - 220
7990

270
270x
280 - 195
280x - 235
290  - 290
290x - 320
370
370x
380
380x
390  - 310
390x - 350

470 4g - 208
470 8g
480 4g
480 8g - 245

GTX 1060 - 250
GTX 1070
GTX 1080

It seems they are more or less stock.

[GTCG]

guys which pool u r using, cause dwarf is giving too low earnings from last 3 days

have been on suprnova.cc for 10 weeks now. very good earnings. switched from flypool and nanopool, since it seemed they were stealing shares.

Same here. Moved to suprnova from 3 different pools. Only here is more true to calculation.

just switch to dwarf now. 7 hours without a block is time for it to catch up.

Been on dwarfpool for a few days. Earnings were indeed low due to lack of shares. Same with Nanopool. I will give suprnova.cc a try tonight.

[m1n1ngP4d4w4n]

guys which pool u r using, cause dwarf is giving too low earnings from last 3 days

have been on suprnova.cc for 10 weeks now. very good earnings. switched from flypool and nanopool, since it seemed they were stealing shares.

Same here. Moved to suprnova from 3 different pools. Only here is more true to calculation.

just switch to dwarf now. 7 hours without a block is time for it to catch up.

Been on dwarfpool for a few days. Earnings were indeed low due to lack of shares. Same with Nanopool. I will give suprnova.cc a try tonight.

Flypool work very well with zcash, payout are rather high

[GTCG]

guys which pool u r using, cause dwarf is giving too low earnings from last 3 days

have been on suprnova.cc for 10 weeks now. very good earnings. switched from flypool and nanopool, since it seemed they were stealing shares.

Same here. Moved to suprnova from 3 different pools. Only here is more true to calculation.

just switch to dwarf now. 7 hours without a block is time for it to catch up.

Been on dwarfpool for a few days. Earnings were indeed low due to lack of shares. Same with Nanopool. I will give suprnova.cc a try tonight.

Flypool work very well with zcash, payout are rather high

Flypool does work well indeed. It's always been stable and a good lot of shares. Never had problems with it but it's not the first time I've read they are stealing shares. I will compare to suprnova and draw my conclusions.

[Vaslime]

guys which pool u r using, cause dwarf is giving too low earnings from last 3 days

have been on suprnova.cc for 10 weeks now. very good earnings. switched from flypool and nanopool, since it seemed they were stealing shares.

Same here. Moved to suprnova from 3 different pools. Only here is more true to calculation.

just switch to dwarf now. 7 hours without a block is time for it to catch up.

Been on dwarfpool for a few days. Earnings were indeed low due to lack of shares. Same with Nanopool. I will give suprnova.cc a try tonight.

Flypool work very well with zcash, payout are rather high

Flypool does work well indeed. It's always been stable and a good lot of shares. Never had problems with it but it's not the first time I've read they are stealing shares. I will compare to suprnova and draw my conclusions.

I agree with that.