|
Jackling
|
 |
December 22, 2016, 04:18:22 PM |
|
Anyone got their 280x up at above 245H/s yet?
Mine's at 240h/s at 1200/1700 1.2vddc
You must have very cheap electricity price. |
|
|
|
|
|
|
|
The grue lurks in the darkest places of the earth. Its favorite diet is adventurers, but its insatiable appetite is tempered by its fear of light. No grue has ever been seen by the light of day, and few have survived its fearsome jaws to tell the tale.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
yudhistira
|
|
December 22, 2016, 04:32:02 PM |
|
Anyone got their 280x up at above 245H/s yet?
Mine's at 240h/s at 1200/1700 1.2vddc
1200/1500 than crash what i was missed out with my rig |
|
|
|
|
SparkIt
|
|
December 22, 2016, 04:34:05 PM |
|
Anyone got their 280x up at above 245H/s yet?
Mine's at 240h/s at 1200/1700 1.2vddc
You must have very cheap electricity price. Stock vddc is 1.15 so it's not much of a differency really. I'm not paying the electricity but it's like $0.08/KWh I think |
|
|
|
|
|
SparkIt
|
|
December 22, 2016, 04:34:49 PM |
|
Anyone got their 280x up at above 245H/s yet?
Mine's at 240h/s at 1200/1700 1.2vddc
1200/1500 than crash what i was missed out with my rig What's your voltage and which 280x do you have? |
|
|
|
|
|
yudhistira
|
|
December 22, 2016, 04:41:28 PM |
|
Anyone got their 280x up at above 245H/s yet?
Mine's at 240h/s at 1200/1700 1.2vddc
1200/1500 than crash what i was missed out with my rig What's your voltage and which 280x do you have? saphire dual x r9 280x  |
|
|
|
|
IOTUSA
|
|
December 22, 2016, 04:47:30 PM |
|
weird: Re: R9 380 ASUS 4G stryx
Reboot and running the command line line version naked with no ATI commands, results in about 152 sols and about 1 to 1.1 sols/w at the wall
reboot and run the latest genoil ETH miner, kill genoil and then run CM v9.2 for linux, results in some sort of "econo" mode performance: 128 sols and about 1.4 sols/w at the wall. In x/1500, using --odsc, x can go from 750 to 1075 with 0.5% change in the hash rate.
On 380 cards you are far better off mining XMR or ETH measured in $$/GPU over time. Just my 5 cent. 2 x 390 cards perform as high as your 6 card rig mining ZEC. |
|
|
|
|
ghostfaceuk
|
|
December 22, 2016, 05:05:44 PM |
|
I see ZEC is slowly rising in price again on Poloniex, wonder how long that lasts after the recent speed increases from Claymore and the other miners?
Hopefully it will continue to rise back up to about $50 a coin and stay there to make it worth me still mining it.
Currently getting a combined 420 sol/s from a R9 280 (non X) and 470.
|
|
|
|
|
|
Newwsr
|
|
December 22, 2016, 05:18:32 PM |
|
What error is this?
DevFee: failed to mine for a long time, something is wrong, stop mining and reconnect.
15:15:18:540 a40 Reconnect in 30 sec...
This is happening all the time and for mining
|
|
|
|
|
Hadmart
Newbie
 Offline
Activity: 56
Merit: 0
|
|
December 22, 2016, 05:37:32 PM |
|
What error is this?
DevFee: failed to mine for a long time, something is wrong, stop mining and reconnect.
15:15:18:540 a40 Reconnect in 30 sec...
This is happening all the time and for mining
You might mine in a pool does not support the dev mining. |
|
|
|
|
dallase
Member
Offline
Activity: 129
Merit: 10
|
|
December 22, 2016, 05:43:29 PM |
|
Anyone else seeing lots of these? They were logging to syslog and also spitting out to the screen. I shut off rsyslog but they stilll litter the screen. It doesnt seem to cause any issues with performance.
Dec 22 11:33:41 rig19 kernel: [ 7805.310495] amdgpu 0000:02:00.0: GPU fault detected: 146 0x07628814
Dec 22 11:33:41 rig19 kernel: [ 7805.311018] amdgpu 0000:02:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00162AEC
Dec 22 11:33:41 rig19 kernel: [ 7805.311543] amdgpu 0000:02:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x030C8014
Dec 22 11:33:41 rig19 kernel: [ 7805.312069] VM fault (0x14, vmid 1) at page 1452780, write from 'TC2' (0x54433200) (200)
|
|
|
|
|
|
Newwsr
|
|
December 22, 2016, 06:09:21 PM |
|
What error is this?
DevFee: failed to mine for a long time, something is wrong, stop mining and reconnect.
15:15:18:540 a40 Reconnect in 30 sec...
This is happening all the time and for mining
You might mine in a pool does not support the dev mining. I'm in www2.coinmine.pl |
|
|
|
|
GTCG
Newbie
Offline
Activity: 29
Merit: 0
|
|
December 22, 2016, 06:14:18 PM |
|
v9.2 Linux version is available.
Thanks. I will check it out and report back! |
|
|
|
|
mistercashking
Legendary
Offline
Activity: 1044
Merit: 1050
@MRCASHKING
|
|
December 22, 2016, 06:22:41 PM |
|
v9.2 Linux version is available.
Thanks Claymore, linux version gets a little less sol/s for me, I gotta make some tweaks. |
|
|
|
|
gaah
Newbie
Offline
Activity: 56
Merit: 0
|
|
December 22, 2016, 06:30:56 PM |
|
v9.2 Linux version is available.
Great work Claymore you are the best! |
|
|
|
|
|
lpedretti
|
|
December 22, 2016, 06:33:41 PM |
|
For some reason my rx 470 rigs are shutting down/restarting with 9.2, it didn't happen with 9.1
I still have to run some tests to see if it's power consumption, but it doesn't happen mining ethereum only, so power draw with this version may be higher than ethereum mining, may be?
I still have to test with a different 470 model, i'm currently mining with nitro+ rx 470 8gb, i have a bunch of gigabyte g1gaming 470 4gb to test to check if there's something related to this.
It's working flawlessly with my r9 390/290 rigs
Too bad i can't overvolt 470's in linux, has anybody found a way/util to work on it? i know it's possible but i haven't found any simple tool to do it.
Best regards!
|
AC: ANuRoFPkCjZSxsw2S41djrrA1D4xMMmwhs
|
|
|
|
Demarsac
|
|
December 22, 2016, 07:00:47 PM |
|
RX 480 8G doing 265-270 sol , stock miner settings, 1165 core, 2000 mem
380 4G doing 170 sol, 1075/1500
290 310 sol, 1000/1250.
Ubuntu 14.04
nice job Claymore
Greetings
Thanks Eliovp Is this 1 RX 480 or multiple on the same rig? I will give linux a try tonight on my RX 480's 8G I have 1342 core, 2000 mem, maybe it can give a bit more? I have tried linux version. Windows version is 10% better in RX 480's Windows I get average 253 H/s totaling around 1520 H/s on a x6 rig Linux I get average 220 H/s totaling around 1320 H/s Still Claymore's Linux version is faster than Optiminer |
|
|
|
|
|
DeCrypterManiac
|
|
December 22, 2016, 07:14:45 PM |
|
What error is this?
DevFee: failed to mine for a long time, something is wrong, stop mining and reconnect.
15:15:18:540 a40 Reconnect in 30 sec...
This is happening all the time and for mining
You might mine in a pool does not support the dev mining. Try www.suprnova.cc |
|
|
|
|
tytanick
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
December 22, 2016, 07:17:42 PM |
|
THX VERY MUCH CLAYMORE for linux version !I implemented 9.2 in my simplemining.net OS 
|
|
|
|
|
lpedretti
|
|
December 22, 2016, 07:25:43 PM |
|
THX VERY MUCH CLAYMORE for linux version !I implemented 9.2 in my simplemining.net OS Quite cool! Does it allow to manage voltages? Thx! Best regards! |
AC: ANuRoFPkCjZSxsw2S41djrrA1D4xMMmwhs
|
|
|
|
lpedretti
|
|
December 22, 2016, 07:27:32 PM |
|
For some reason my rx 470 rigs are shutting down/restarting with 9.2, it didn't happen with 9.1
I still have to run some tests to see if it's power consumption, but it doesn't happen mining ethereum only, so power draw with this version may be higher than ethereum mining, may be?
I still have to test with a different 470 model, i'm currently mining with nitro+ rx 470 8gb, i have a bunch of gigabyte g1gaming 470 4gb to test to check if there's something related to this.
It's working flawlessly with my r9 390/290 rigs
Too bad i can't overvolt 470's in linux, has anybody found a way/util to work on it? i know it's possible but i haven't found any simple tool to do it.
Best regards!
It was indeed power consumption, stock speeds still had resets/poweroffs, undervolted the cards and everything runs fine now. |
AC: ANuRoFPkCjZSxsw2S41djrrA1D4xMMmwhs
|
|
|
|
