old_pioner
|
|
March 21, 2014, 03:09:59 PM |
|
GREAT!!!
But we have not the new ccminer.
|
|
|
|
jack80
|
|
March 21, 2014, 04:11:09 PM |
|
config .bat for max coin for nvidia 750ti anyone knows ? .
|
|
|
|
cvax
Member
Offline
Activity: 84
Merit: 10
|
|
March 21, 2014, 04:24:31 PM |
|
What's the typical FC hashrate you could get on a single 750ti?
I have cards ranging from 40mh/s to 44mh/s currently.
|
BTC: 15HAePieDjYge6LTG2HFRZEJseRYJJqmta | YAC: YMvBp1SpY2sZ8nUZgKFLTEx7neuUZ7APuM 8x 750Ti's, AsRock 970 Extreme 4, Athlon II 170u
|
|
|
ManiacMiner
|
|
March 21, 2014, 04:41:57 PM |
|
config .bat for max coin for nvidia 750ti anyone knows ? .
cudaminer --algo=keccak -o stratum+tcp://address:port -u user -p pass -H 2 -i 0 -m 1 -l T1960x24 -d 0,1,2 -L 256 must have ~177MH if you card overclocked.
|
(つ ͡๏ ͜১ ͡๏ )つ[̲̅$̲̅(̲̅5̲̅)̲̅$̲̅]ε=ʕ ͡๏ ͜১ ͡๏ʔ=з
|
|
|
D4rkAng3l
Member
Offline
Activity: 112
Merit: 10
|
|
March 21, 2014, 05:13:07 PM |
|
Hy Guys,
someone can help me to "underclock" cudaminer. I want use my graphic card at the 50% of its potentiality to reduce to avoid laptop overheating
Someone can help me?
Tnx
|
|
|
|
relm9
|
|
March 21, 2014, 05:18:47 PM |
|
Solo mining FC is still interesting. Every found block (assuming 0.000030 per FC) is worth 0,0015 BTC which should be around 65 Euro cents at the moment. Looking at my 3 ASUS ROG MARS I see them finding maybe one block per hour with 500 MHash/s. So that's roughly 24*65 cents or 15.6 Euros per day. I call that profitable. Hence I just switched the other rig back from Yacoin Mining to FC mining. But not into the lovely 66666.6666 wallet. I don't want to disturb these numbers You can do the math here: http://agran.net/fuguecoin_calc.phpAlso it might be advisable to hold on to these FC because I would expect the value to rise a bit more. Christian Do you have some special node or something ? I really don't get that much. I am clearly on the wrong side of the standard deviation... I found 4 blocks yesterday (didn't run the whole day though). Anyhow, they are easier to buy than to mine... The calculator seems way off for me, or I'm just really unlucky. Mined for 8 hours with 330 MH/s, not a single block.
|
|
|
|
antonio8
Legendary
Offline
Activity: 1400
Merit: 1000
|
|
March 21, 2014, 05:21:57 PM |
|
Anyone recently mined Micro Coin with a 750ti, does 37kh/s sound about right?
I believe the current N-Factor is 11.
|
If you are going to leave your BTC on an exchange please send it to this address instead 1GH3ub3UUHbU5qDJW5u3E9jZ96ZEmzaXtG, I will at least use the money better than someone who steals it from the exchange. Thanks
|
|
|
EtBIM
Member
Offline
Activity: 83
Merit: 10
|
|
March 21, 2014, 05:33:34 PM |
|
The calculator seems way off for me, or I'm just really unlucky. Mined for 8 hours with 330 MH/s, not a single block.
I found 5 soloing, 1 more than the calculator's prediction, so yeah i guess you were unlucky
|
BTC: 1PoM7Us1VwPAfULsyTcwjqAeZMjRwiokB4
|
|
|
ManiacMiner
|
|
March 21, 2014, 05:37:44 PM |
|
Hy Guys,
someone can help me to "underclock" cudaminer. I want use my graphic card at the 50% of its potentiality to reduce to avoid laptop overheating
Someone can help me?
Tnx
Try to reduce the -l value. Discover what can your card with --benchmark and reduce the value of twice. I think it can help, but not sure on 100%
|
(つ ͡๏ ͜১ ͡๏ )つ[̲̅$̲̅(̲̅5̲̅)̲̅$̲̅]ε=ʕ ͡๏ ͜১ ͡๏ʔ=з
|
|
|
jack80
|
|
March 21, 2014, 05:38:01 PM |
|
config .bat for max coin for nvidia 750ti anyone knows ? .
cudaminer --algo=keccak -o stratum+tcp://address:port -u user -p pass -H 2 -i 0 -m 1 -l T1960x24 -d 0,1,2 -L 256 must have ~177MH if you card overclocked. Dont work . cudaminer --algo=keccak -o stratum+tcp://address:port -u user -p pass -l T1960x24 -L 256 ( This work ) , and i have 170000 kh/s for board .
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
March 21, 2014, 05:45:27 PM |
|
config .bat for max coin for nvidia 750ti anyone knows ? .
cudaminer --algo=keccak -o stratum+tcp://address:port -u user -p pass -H 2 -i 0 -m 1 -l T1960x24 -d 0,1,2 -L 256 must have ~177MH if you card overclocked. Dont work . remove -d 0,1,2
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
jack80
|
|
March 21, 2014, 05:47:08 PM |
|
cudaminer --algo=keccak -o stratum+tcp://address:port -u user -p pass -l T1960x24 -L 256 ( This work ) , and i have 170000 kh/s for board .
|
|
|
|
ManiacMiner
|
|
March 21, 2014, 05:51:33 PM |
|
config .bat for max coin for nvidia 750ti anyone knows ? .
cudaminer --algo=keccak -o stratum+tcp://address:port -u user -p pass -H 2 -i 0 -m 1 -l T1960x24 -d 0,1,2 -L 256 must have ~177MH if you card overclocked. Dont work . [-d] gives a comma separated list of CUDA device IDs to operate on. Device IDs start counting from 0! Alternatively give string names of your card like gtx780ti or gt640#2 (matching 2nd gt640 in the PC). Read README in cudaminer folder, there are many interesting.
|
(つ ͡๏ ͜১ ͡๏ )つ[̲̅$̲̅(̲̅5̲̅)̲̅$̲̅]ε=ʕ ͡๏ ͜১ ͡๏ʔ=з
|
|
|
jack80
|
|
March 21, 2014, 05:57:17 PM Last edit: March 21, 2014, 06:08:34 PM by jack80 |
|
Thank you at all . Now go at 680 mh/s with 4 Nvidia 750ti . On Maxcoin . 2 session of cudaminer or 1 only to maximate hashrate with Max ? Im on win 7 64 bit .
|
|
|
|
D4rkAng3l
Member
Offline
Activity: 112
Merit: 10
|
|
March 21, 2014, 06:06:23 PM |
|
Hy Guys,
someone can help me to "underclock" cudaminer. I want use my graphic card at the 50% of its potentiality to reduce to avoid laptop overheating
Someone can help me?
Tnx
Try to reduce the -l value. Discover what can your card with --benchmark and reduce the value of twice. I think it can help, but not sure on 100% So if I execute cudaminer.exe --benchmark I obtain something like it: C:\Users\Andrea\Documents\crypt\cudaminer-2014-02-28\x64>cudaminer.exe --benchma rk *** CudaMiner for nVidia GPUs by Christian Buchner *** This is version 2014-02-28 (beta) based on pooler-cpuminer 2.3.2 (c) 2010 Jeff Garzik, 2012 pooler Cuda additions Copyright 2013,2014 Christian Buchner LTC donation address: LKS1WDKGED647msBQfLBHV3Ls8sveGncnm BTC donation address: 16hJF5mceSojnTD3ZTUDqdRhDyPJzoRakM YAC donation address: Y87sptDEcpLkLeAuex6qZioDbvy1qXZEj4 [2014-03-21 18:57:38] 1 miner threads started, using 'scrypt' algorithm. [2014-03-21 18:57:38] GPU #0: GeForce GT 720M with compute capability 2.1 [2014-03-21 18:57:38] GPU #0: interactive: 1, tex-cache: 0 , single-alloc: 0 [2014-03-21 18:57:38] GPU #0: 32 hashes / 4.0 MB per warp. [2014-03-21 18:57:38] GPU #0: Performing auto-tuning (Patience...) [2014-03-21 18:57:38] GPU #0: maximum total warps (BxW): 436 [2014-03-21 18:57:45] GPU #0: 26213.73 hash/s with configuration F4x16 [2014-03-21 18:57:45] GPU #0: using launch configuration F4x16 [2014-03-21 18:57:45] GPU #0: GeForce GT 720M, 23.83 khash/s [2014-03-21 18:57:45] Total: 23.83 khash/s [2014-03-21 18:57:51] GPU #0: GeForce GT 720M, 23.58 khash/s [2014-03-21 18:57:51] Total: 23.58 khash/s
So I think that my hasching speed is arount 24 khash/s (is it so low as value to do something concrete?) and, at first stage I have to change it in 12 khash/sBut what exactly have I to do to perform this operation? You say to me that I haveto reduce the -l...ok...but if execute: cudaminer.exe --help for the -l paramether it say to me: -l, --launch-config gives the launch configuration for each kernel in a comma separated list, one per device. So it seems to me that it is not related to the hashrate speed... What am I missing? Tnx
|
|
|
|
jack80
|
|
March 21, 2014, 06:15:07 PM |
|
Christian , program a one cudaminer that makes 450 mh/s with Nvidia 750ti pls ( on maxcoin ) .
|
|
|
|
sin242
|
|
March 21, 2014, 06:17:12 PM |
|
The calculator seems way off for me, or I'm just really unlucky. Mined for 8 hours with 330 MH/s, not a single block.
I found 5 soloing, 1 more than the calculator's prediction, so yeah i guess you were unlucky According to the calc i should be getting 34 blocks/day. I'm definately below that point right now
|
Dark: Xk9BoVerBd41JCjWQEhnxoowP7YNUK439z BTC: 1JzPN2h8WGSi7kQeY5wuP4PjVD2hxkHJQM
|
|
|
ManiacMiner
|
|
March 21, 2014, 06:23:46 PM |
|
C:\Users\Andrea\Documents\crypt\cudaminer-2014-02-28\x64>cudaminer.exe --benchma rk *** CudaMiner for nVidia GPUs by Christian Buchner *** This is version 2014-02-28 (beta) based on pooler-cpuminer 2.3.2 (c) 2010 Jeff Garzik, 2012 pooler Cuda additions Copyright 2013,2014 Christian Buchner LTC donation address: LKS1WDKGED647msBQfLBHV3Ls8sveGncnm BTC donation address: 16hJF5mceSojnTD3ZTUDqdRhDyPJzoRakM YAC donation address: Y87sptDEcpLkLeAuex6qZioDbvy1qXZEj4 [2014-03-21 18:57:38] 1 miner threads started, using 'scrypt' algorithm. [2014-03-21 18:57:38] GPU #0: GeForce GT 720M with compute capability 2.1 [2014-03-21 18:57:38] GPU #0: interactive: 1, tex-cache: 0 , single-alloc: 0 [2014-03-21 18:57:38] GPU #0: 32 hashes / 4.0 MB per warp. [2014-03-21 18:57:38] GPU #0: Performing auto-tuning (Patience...) [2014-03-21 18:57:38] GPU #0: maximum total warps (BxW): 436 [2014-03-21 18:57:45] GPU #0: 26213.73 hash/s with configuration F4x16 [2014-03-21 18:57:45] GPU #0: using launch configuration F4x16 [2014-03-21 18:57:45] GPU #0: GeForce GT 720M, 23.83 khash/s [2014-03-21 18:57:45] Total: 23.83 khash/s [2014-03-21 18:57:51] GPU #0: GeForce GT 720M, 23.58 khash/s [2014-03-21 18:57:51] Total: 23.58 khash/s
So I think that my hasching speed is arount 24 khash/s (is it so low as value to do something concrete?) and, at first stage I have to change it in 12 khash/sBut what exactly have I to do to perform this operation? You say to me that I haveto reduce the -l...ok...but if execute: cudaminer.exe --help for the -l paramether it say to me: -l, --launch-config gives the launch configuration for each kernel in a comma separated list, one per device. So it seems to me that it is not related to the hashrate speed... What am I missing? Tnx See this [2014-03-21 18:57:45] GPU #0: using launch configuration F4x16. Try run with -l F2x8. cudaminer.exe -o stratum+tcp://address:port -u user -p pass -H 1 -i 0 -C 1 -m 0 -l F2x8
|
(つ ͡๏ ͜১ ͡๏ )つ[̲̅$̲̅(̲̅5̲̅)̲̅$̲̅]ε=ʕ ͡๏ ͜১ ͡๏ʔ=з
|
|
|
D4rkAng3l
Member
Offline
Activity: 112
Merit: 10
|
|
March 21, 2014, 06:31:53 PM |
|
C:\Users\Andrea\Documents\crypt\cudaminer-2014-02-28\x64>cudaminer.exe --benchma rk *** CudaMiner for nVidia GPUs by Christian Buchner *** This is version 2014-02-28 (beta) based on pooler-cpuminer 2.3.2 (c) 2010 Jeff Garzik, 2012 pooler Cuda additions Copyright 2013,2014 Christian Buchner LTC donation address: LKS1WDKGED647msBQfLBHV3Ls8sveGncnm BTC donation address: 16hJF5mceSojnTD3ZTUDqdRhDyPJzoRakM YAC donation address: Y87sptDEcpLkLeAuex6qZioDbvy1qXZEj4 [2014-03-21 18:57:38] 1 miner threads started, using 'scrypt' algorithm. [2014-03-21 18:57:38] GPU #0: GeForce GT 720M with compute capability 2.1 [2014-03-21 18:57:38] GPU #0: interactive: 1, tex-cache: 0 , single-alloc: 0 [2014-03-21 18:57:38] GPU #0: 32 hashes / 4.0 MB per warp. [2014-03-21 18:57:38] GPU #0: Performing auto-tuning (Patience...) [2014-03-21 18:57:38] GPU #0: maximum total warps (BxW): 436 [2014-03-21 18:57:45] GPU #0: 26213.73 hash/s with configuration F4x16 [2014-03-21 18:57:45] GPU #0: using launch configuration F4x16 [2014-03-21 18:57:45] GPU #0: GeForce GT 720M, 23.83 khash/s [2014-03-21 18:57:45] Total: 23.83 khash/s [2014-03-21 18:57:51] GPU #0: GeForce GT 720M, 23.58 khash/s [2014-03-21 18:57:51] Total: 23.58 khash/s
So I think that my hasching speed is arount 24 khash/s (is it so low as value to do something concrete?) and, at first stage I have to change it in 12 khash/sBut what exactly have I to do to perform this operation? You say to me that I haveto reduce the -l...ok...but if execute: cudaminer.exe --help for the -l paramether it say to me: -l, --launch-config gives the launch configuration for each kernel in a comma separated list, one per device. So it seems to me that it is not related to the hashrate speed... What am I missing? Tnx See this [2014-03-21 18:57:45] GPU #0: using launch configuration F4x16. Try run with -l F2x8 Later I will try but exactly what means F4x16 and F2x8What these value means?
|
|
|
|
debido666
Member
Offline
Activity: 68
Merit: 10
|
|
March 21, 2014, 06:34:59 PM |
|
What is the average speed difference for scrypt mining between the GTX 750 and GTX 750 ti? Guessing 260 to 300 KH/s @ $110 to $155? Does the extra 1GB memory make that much of difference?
|
|
|
|
|