[ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX]

[zelante]

has anyone been able to confirm if --algo=myr-gr works?

work fine for me

May I ask how you got ccminer to work?
I am trying on super nova using: ccminer.exe -a myr-gr -o stratum+tcp://myrgrs.suprnova.cc:5678
I get stratum detected new block and it shows 132,821 kh/s but no yays or boos
EDIT: Super nova doesn't show my worker connected either

hmm... they use --scrypt for mining in Getting Started section. I think this is not myriad-groestl pool... try http://myrgroestl.stablehash.com/
test this pool - all work
did you create worker and set password for it?

ccminer.exe -a myr-gr -o stratum+tcp://myrgrs.suprnova.cc:5678 -u user.worker -p password

[liomojo1]

i tryed it and it is working here is the config
x86\ccminer.exe --algo=myr-gr -o stratum+tcp://myrgrs.suprnova.cc:5678 -u worker.1 -p 1 -v 512

[liomojo1]

How many myr is a 750Ti expected to get in a day?

I just trying , but about 300 or less for a day.

[zelante]

i tryed it and it is working here is the config
x86\ccminer.exe --algo=myr-gr -o stratum+tcp://myrgrs.suprnova.cc:5678 -u worker.1 -p 1 -v 512

-v, --vote=VOTE       block reward vote (for HeavyCoin)

did you got "accepted yay" on this pool with this config?

[bigjme]

How many myr is a 750Ti expected to get in a day?

I just trying , but about 300 or less for a day.

Thats very low. Doesnt seems like a good return

[liomojo1]

i tryed it and it is working here is the config
x86\ccminer.exe --algo=myr-gr -o stratum+tcp://myrgrs.suprnova.cc:5678 -u worker.1 -p 1 -v 512

-v, --vote=VOTE       block reward vote (for HeavyCoin)

did you got "accepted yay" on this pool with this config?

yep only yay!!! i get no boos 

[liomojo1]

How many myr is a 750Ti expected to get in a day?

I just trying , but about 300 or less for a day.

Thats very low. Doesnt seems like a good return

I don`t know i just wanted to try if it will work, and i am waiting for your new ccminer compile with the right spelling 
Thank you in advance.

[bigjme]

Ooo your waiting? Haha what version do you want?

Compute version, what cards, what version? x86 or x64

[liomojo1]

Ti 750  compute 3.5 , both x86 x64.   ccminer v6
I promise tomorrow to study your guide how to compile.

[bigjme]

haha don't worry about it. do we want a version uploading with temperature readings? i may be arsed to implement it for you all ahah

[antonio8]

has anyone been able to confirm if --algo=myr-gr works?

work fine for me

May I ask how you got ccminer to work?
I am trying on super nova using: ccminer.exe -a myr-gr -o stratum+tcp://myrgrs.suprnova.cc:5678
I get stratum detected new block and it shows 132,821 kh/s but no yays or boos
EDIT: Super nova doesn't show my worker connected either

hmm... they use --scrypt for mining in Getting Started section. I think this is not myriad-groestl pool... try http://myrgroestl.stablehash.com/
test this pool - all work
did you create worker and set passord for it?

Ok. Will try. Just waiting for email verification

Yes. ccminer.exe -a myr-gr -o stratum+tcp://myrgrs.suprnova.cc:5678 -u worker.670 -p x -d 0

[liomojo1]

haha don't worry about it. do we want a version uploading with temperature readings? i may be arsed to implement it for you all ahah

Is it working only  for x64 or for x86 too , I will be glad to test this option.

[bigjme]

nvml only works for x64 sadly
i mean i have the code, its what i use for my web interface i just need to sort out some issues i am having, like ccminer using device id 1 actually being device 3 on my system  

ooo and here is ccminer 0.6.1 spell check edition
https://mega.co.nz/#!Eh8WHbzZ!72gpDehNrRrRTcWUWXlE4wqiG_mOrCNmH1JQM6wS7b8

[zelante]

has anyone been able to confirm if --algo=myr-gr works?

work fine for me

May I ask how you got ccminer to work?
I am trying on super nova using: ccminer.exe -a myr-gr -o stratum+tcp://myrgrs.suprnova.cc:5678
I get stratum detected new block and it shows 132,821 kh/s but no yays or boos
EDIT: Super nova doesn't show my worker connected either

hmm... they use --scrypt for mining in Getting Started section. I think this is not myriad-groestl pool... try http://myrgroestl.stablehash.com/
test this pool - all work
did you create worker and set passord for it?

Ok. Will try. Just waiting for email verification

Yes. ccminer.exe -a myr-gr -o stratum+tcp://myrgrs.suprnova.cc:5678 -u worker.670 -p x -d 0

u must change worker to your username, so if you choose in registration username smith then you must use -u smith.670

[zelante]

nvml only works for x64 sadly
i mean i have the code, its what i use for my web interface i just need to sort out some issues i am having, like ccminer using device id 1 actually being device 3 on my system  

ooo and here is ccminer 0.6.1 spell check edition
https://mega.co.nz/#!Eh8WHbzZ!72gpDehNrRrRTcWUWXlE4wqiG_mOrCNmH1JQM6wS7b8

i'm using nvapi for reading temps and it is work for both platforms x86 and x64
at that moment i'm implant nvapi in cudaminer

[bigjme]

i'm using nvapi for reading temps and it is work for both platforms x86 and x64

i looked through it but couldn't get it working properly. any chance you can send me some sample code to get device temp? i will work out the rest once i have a base to work from

[antonio8]

has anyone been able to confirm if --algo=myr-gr works?

work fine for me

May I ask how you got ccminer to work?
I am trying on super nova using: ccminer.exe -a myr-gr -o stratum+tcp://myrgrs.suprnova.cc:5678
I get stratum detected new block and it shows 132,821 kh/s but no yays or boos
EDIT: Super nova doesn't show my worker connected either

hmm... they use --scrypt for mining in Getting Started section. I think this is not myriad-groestl pool... try http://myrgroestl.stablehash.com/
test this pool - all work
did you create worker and set passord for it?

Ok. Will try. Just waiting for email verification

Yes. ccminer.exe -a myr-gr -o stratum+tcp://myrgrs.suprnova.cc:5678 -u worker.670 -p x -d 0

u must change worker to your username, so if you choose in registration username smith then you must use -u smith.670

correct. i have it as my user name plus the ".670"

I just changed it for generic for post. I read a while ago to never put your real username and password for all to see. I know if someone uses it they will be mining for me.

EDIT: Sorry zelante to waste yor time but I am a dumba$$. I was trying to run this on my GTX 670. Evidently it doesn't work on it. I just tried my GTX 750ti's and all works fine. Getting  @ 5,100 kh/s on each.

[liomojo1]

nvml only works for x64 sadly
i mean i have the code, its what i use for my web interface i just need to sort out some issues i am having, like ccminer using device id 1 actually being device 3 on my system  

ooo and here is ccminer 0.6.1 spell check edition
https://mega.co.nz/#!Eh8WHbzZ!72gpDehNrRrRTcWUWXlE4wqiG_mOrCNmH1JQM6wS7b8

I thank you

[cvax]

nvml only works for x64 sadly
i mean i have the code, its what i use for my web interface i just need to sort out some issues i am having, like ccminer using device id 1 actually being device 3 on my system  

ooo and here is ccminer 0.6.1 spell check edition
https://mega.co.nz/#!Eh8WHbzZ!72gpDehNrRrRTcWUWXlE4wqiG_mOrCNmH1JQM6wS7b8

Thanks.

[TeaWolf913]

Well... After the whole, made this guy, stuff, it says Unable to query CUDA driver version! Is an nVidia Driver installed?

Make sure you have driver version 190.38 installed,because apparently in old cards, the newest drivers are more memory aggressive, reporting less free memory to the system. You'll have to revert back to your older drivers if you're going to use a video card with the bare minimum amount of RAM.

But before that,just download GPU-Z and make sure that the CUDA checkbox at the bottom is ticked. Yes,people have large configs for cards, but that is needed only when you want specific configs,but the autotune is generally a really good option.

Thanks for all the help. I'll try it. But first of all, do u have a link to this GPU-Z you speak of, should I just google it