OLD: BFGMiner 3.10.0: modular ASIC+FPGA, GBT+Strtm, RPC, Mac/Lnx/W64, AntU1, DRB

[Badonkadonk]

anyone that could help me to figure out how to run these hashbuster nano bords?
been trying for hours and now im ready to start banging my head to the wall x)

im on win 8.1, and installed the drivers with zadig.
i have reconnected all 5 of the boards a billion times, both usb cable and power cable.
i have rebooted countless times. i think i have tried pretty much everything in every post i have found that has made any kind off sense to me.

these where working fine until yesterday using virtualbox and the custom cgminer that hashbuster released.
then i rebooted and it all went to hell.

all i get now is "waiting for devices: press m+ to add, or q to quit.

any help is appreciated
thanks

edit: i tried version 3.5.1, 3.2.7, 3.5.3 and 3.7.0

[1715467700]

1715467700

[1715467700]

1715467700

[jedimstr]

anyone that could help me to figure out how to run these hashbuster nano bords?
been trying for hours and now im ready to start banging my head to the wall x)

im on win 8.1, and installed the drivers with zadig.
i have reconnected all 5 of the boards a billion times, both usb cable and power cable.
i have rebooted countless times. i think i have tried pretty much everything in every post i have found that has made any kind off sense to me.

these where working fine until yesterday using virtualbox and the custom cgminer that hashbuster released.
then i rebooted and it all went to hell.

all i get now is "waiting for devices: press m+ to add, or q to quit.

any help is appreciated
thanks

edit: i tried version 3.5.1, 3.2.7, 3.5.3 and 3.7.0

That's your problem right there... Zadig. BFGMiner doesn't use Zadig last I checked.  That's for CGMiner.

[Badonkadonk]

anyone that could help me to figure out how to run these hashbuster nano bords?
been trying for hours and now im ready to start banging my head to the wall x)

im on win 8.1, and installed the drivers with zadig.
i have reconnected all 5 of the boards a billion times, both usb cable and power cable.
i have rebooted countless times. i think i have tried pretty much everything in every post i have found that has made any kind off sense to me.

these where working fine until yesterday using virtualbox and the custom cgminer that hashbuster released.
then i rebooted and it all went to hell.

all i get now is "waiting for devices: press m+ to add, or q to quit.

any help is appreciated
thanks

edit: i tried version 3.5.1, 3.2.7, 3.5.3 and 3.7.0

That's your problem right there... Zadig. BFGMiner doesn't use Zadig last I checked.  That's for CGMiner.

well, i uninstalled the minsers in device manager. no change.
any special drivers i should be using?

[Luke-Jr]

any special drivers i should be using?

The default, standard USB HID driver.

[elrock]

Running 3.7.0 compiled using Homebrew.

The running stats log on the second half of the terminal window does not have any line breaks.  It updates as one continuous string that just fills the bottom of the screen:

Bug when compiled without unicode support. Already fixed in git.

I use a Macbook to ssh into an Ubuntu rig, and I'm still seeing this bug in the Mac's display, even after building from the latest git. Not a big deal since it's still hashing away. Is there a way to rebuild *with* unicode support?

[nwoolls]

I use a Macbook to ssh into an Ubuntu rig, and I'm still seeing this bug in the Mac's display, even after building from the latest git. Not a big deal since it's still hashing away. Is there a way to rebuild *with* unicode support?

How did you build from Git? I just double-checked myself on OS X 10.9 and the issue seems fixed to me.

To install the latest bfgminer from Git using Homebrew you can do:

Code:

brew tap nwoolls/xgminer
brew install bfgminer --HEAD 

[elrock]

I mine on Ubuntu not Mac so I don't use homebrew for bfgminer. (I just use a Mac to check status.)

Anyway, problem solved -- I was running the older version by mistake.

[noct]

anyone that could help me to figure out how to run these hashbuster nano bords?
been trying for hours and now im ready to start banging my head to the wall x)

im on win 8.1, and installed the drivers with zadig.
i have reconnected all 5 of the boards a billion times, both usb cable and power cable.
i have rebooted countless times. i think i have tried pretty much everything in every post i have found that has made any kind off sense to me.

these where working fine until yesterday using virtualbox and the custom cgminer that hashbuster released.
then i rebooted and it all went to hell.

all i get now is "waiting for devices: press m+ to add, or q to quit.

any help is appreciated
thanks

edit: i tried version 3.5.1, 3.2.7, 3.5.3 and 3.7.0

Same here. Windows 7 x64.
bfgminer -D -d? finds this:

 [2013-11-30 00:47:06] lowlevel_scan: Found hid device at hid:\\?\hid#vid_fa04&p
id_0011#6&11d06e40&1&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#v
id_fa04&pid_0011#6&11d06e40&1&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}, vid=f
a04, pid=0011, manuf=StarFury Laboratories, prod=HashBuster.nano Project, serial
=       )

But i only get "waiting for devices: press m+ to add, or q to quit."
Can anyone help?

[purelithium]

I'm baffled as to why bfgminer keeps crashing on this system. Why is it looking for USB devices when I'm trying to mine scrypt?

Code:

C:\Mining\bfgminer-3.7.0-win64>bfgminer.exe --scrypt -T
 [2013-11-27 20:36:26] Started bfgminer 3.7.0
 [2013-11-27 20:36:26] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-27 20:36:26] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-27 20:36:26] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-27 20:36:26] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-27 20:36:26] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-27 20:36:26] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-27 20:36:26] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-27 20:36:26] Failed to get PortName registry key value in lowl-vcom.c
_vcom_devinfo_scan_windows__hubport():443: The system cannot find the file speci
fied.

 [2013-11-27 20:36:26] Failed to ioctl (1) in lowl-vcom.c windows_usb_get_root_h
ub_path():497: The operation completed successfully.


C:\Mining\bfgminer-3.7.0-win64>

I used WeBisect session "purelithiumNov29" to try and bisect the problem. This is what it gave me once I bisected all I could:

Code:

There are only 'skip'ped commits left to test.
The first bad commit could be any of:
e61f3a480388cfabe4dd7ddcbd643c6d7390c751
745bd11dc27a745f42fdb2361da60e0ca5bc5fa6
dd43825dbb5300d8509e7da8bba4d4599a98f719
ebf66582ace0fe5b7162f2d896a5b59043707a85
fd7d89dfef7398bedfd7d6f00ac6601a441a2d28
a651e94616c4c3c5eb9aefc7b2c350e8793e6628
ce4eba9042cdd3070a9770699987cd3d4005fc2f
f84c1a473f8618c46750701c249eddbf940d240f
We cannot bisect more!

The build I got before that message didn't have the error I described in my quoted message, but It did have another issue of crashing almost immediately on connecting to a pool. Not sure how I could bisect that one... As of right now 3.2.1 is the only functional build for my machine.

[Luke-Jr]

Same here. Windows 7 x64.
bfgminer -D -d? finds this:

 [2013-11-30 00:47:06] lowlevel_scan: Found hid device at hid:\\?\hid#vid_fa04&p
id_0011#6&11d06e40&1&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#v
id_fa04&pid_0011#6&11d06e40&1&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}, vid=f
a04, pid=0011, manuf=StarFury Laboratories, prod=HashBuster.nano Project, serial
=       )

But i only get "waiting for devices: press m+ to add, or q to quit."
Can anyone help?

I need the whole output from -D -d?

I'm baffled as to why bfgminer keeps crashing on this system. Why is it looking for USB devices when I'm trying to mine scrypt?

Code:

C:\Mining\bfgminer-3.7.0-win64>bfgminer.exe --scrypt -T
 [2013-11-27 20:36:26] Started bfgminer 3.7.0
 [2013-11-27 20:36:26] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-27 20:36:26] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-27 20:36:26] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-27 20:36:26] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-27 20:36:26] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-27 20:36:26] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-27 20:36:26] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-27 20:36:26] Failed to get PortName registry key value in lowl-vcom.c
_vcom_devinfo_scan_windows__hubport():443: The system cannot find the file speci
fied.

 [2013-11-27 20:36:26] Failed to ioctl (1) in lowl-vcom.c windows_usb_get_root_h
ub_path():497: The operation completed successfully.


C:\Mining\bfgminer-3.7.0-win64>

I used WeBisect session "purelithiumNov29" to try and bisect the problem. This is what it gave me once I bisected all I could:

Code:

There are only 'skip'ped commits left to test.
The first bad commit could be any of:
e61f3a480388cfabe4dd7ddcbd643c6d7390c751
745bd11dc27a745f42fdb2361da60e0ca5bc5fa6
dd43825dbb5300d8509e7da8bba4d4599a98f719
ebf66582ace0fe5b7162f2d896a5b59043707a85
fd7d89dfef7398bedfd7d6f00ac6601a441a2d28
a651e94616c4c3c5eb9aefc7b2c350e8793e6628
ce4eba9042cdd3070a9770699987cd3d4005fc2f
f84c1a473f8618c46750701c249eddbf940d240f
We cannot bisect more!

The build I got before that message didn't have the error I described in my quoted message, but It did have another issue of crashing almost immediately on connecting to a pool. Not sure how I could bisect that one... As of right now 3.2.1 is the only functional build for my machine.

Please test the latest git: http://luke.dashjr.org/tmp/code/webisect/webisect.php?dobuild=bfgminer

[purelithium]

I get this output when running the git you linked to with my optimal scrypt settings that worked with 3.2.1, then it immediately crashes:

Code:

C:\Users\BigMiner\Desktop\New folder>bfgminer.exe --scrypt  -I 13,19,19,19 --thr
ead-concurrency 16384,22400,22400,22400 --gpu-engine 1045,1150,1050,1050 --gpu-m
emclock 1450,1420,1425,1425 -w 256,256,256,256 --auto-fan --failover-only --gpu-
powertune 0,20,20,20 --scan-serial all --scan-serial opencl:auto -o pool1.us.mul
tipool.us:3345 -u user -p "" -d 0 -d 1 -d 2 -d 3 -T
 [2013-11-29 19:30:51] Started bfgminer 3.7.0
 [2013-11-29 19:30:51] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-29 19:30:51] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-29 19:30:51] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-29 19:30:51] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-29 19:30:51] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-29 19:30:51] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-29 19:30:51] Failed to get PortName registry key value in lowl-vcom.c
_vcom_devinfo_scan_windows__hubport():443: The system cannot find the file speci
fied.

 [2013-11-29 19:30:51] Failed to ioctl (1) in lowl-vcom.c windows_usb_get_root_h
ub_path():497: The operation completed successfully.

 [2013-11-29 19:30:53] Twinfury: Not a valid response from device (-1)

 [2013-11-29 19:30:54] klondike_lowl_probe: Matched "(null)" serial "(null)", bu
t lowlevel driver is not usb!
 [2013-11-29 19:30:56] x6500_lowl_probe: Matched "(null)" serial "(null)", but l
owlevel driver is not ft232r!
 [2013-11-29 19:30:56] ztex_lowl_probe: Matched "(null)" serial "(null)", but lo
wlevel driver is not usb!
 [2013-11-29 19:31:00] Read of fd 3 returned 0
 [2013-11-29 19:31:00] nanofury_lowl_probe: Matched "(null)" serial "(null)", bu
t lowlevel driver is not mcp2210!
 [2013-11-29 19:31:00] hashbuster_lowl_probe: Matched "(null)" serial "(null)",
but lowlevel driver is not hid!
 [2013-11-29 19:31:00] hashbuster2_lowl_probe: Matched "(null)" serial "(null)",
 but lowlevel driver is not usb_generic!
 [2013-11-29 19:31:02] Probing for an alive pool
 [2013-11-29 19:31:03] Pool 0 http://pool1.us.multipool.us:3345 alive

 [2013-11-29 19:31:03] Network difficulty changed to 1 (13.44Mh/s)

 [2013-11-29 19:31:03] Stratum from pool 0 detected new block

 [2013-11-29 19:31:03] Pool 0 is hiding block contents from us

[nwoolls]

I get this output when running the git you linked to with my optimal scrypt settings that worked with 3.2.1, then it immediately crashes:

One thing maybe worth trying is changing your -d 0 -d 1 etc to -d OCL0 -d OCL1 etc. Just a thought as I know some code changed there.

[Luke-Jr]

I get this output when running the git you linked to with my optimal scrypt settings that worked with 3.2.1, then it immediately crashes:

Code:

C:\Users\BigMiner\Desktop\New folder>bfgminer.exe --scrypt  -I 13,19,19,19 --thr
ead-concurrency 16384,22400,22400,22400 --gpu-engine 1045,1150,1050,1050 --gpu-m
emclock 1450,1420,1425,1425 -w 256,256,256,256 --auto-fan --failover-only --gpu-
powertune 0,20,20,20 --scan-serial all --scan-serial opencl:auto -o pool1.us.mul
tipool.us:3345 -u user -p "" -d 0 -d 1 -d 2 -d 3 -T
 [2013-11-29 19:30:51] Started bfgminer 3.7.0
 [2013-11-29 19:30:51] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-29 19:30:51] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-29 19:30:51] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-29 19:30:51] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-29 19:30:51] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-29 19:30:51] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-29 19:30:51] Failed to get PortName registry key value in lowl-vcom.c
_vcom_devinfo_scan_windows__hubport():443: The system cannot find the file speci
fied.

 [2013-11-29 19:30:51] Failed to ioctl (1) in lowl-vcom.c windows_usb_get_root_h
ub_path():497: The operation completed successfully.

 [2013-11-29 19:30:53] Twinfury: Not a valid response from device (-1)

 [2013-11-29 19:30:54] klondike_lowl_probe: Matched "(null)" serial "(null)", bu
t lowlevel driver is not usb!
 [2013-11-29 19:30:56] x6500_lowl_probe: Matched "(null)" serial "(null)", but l
owlevel driver is not ft232r!
 [2013-11-29 19:30:56] ztex_lowl_probe: Matched "(null)" serial "(null)", but lo
wlevel driver is not usb!
 [2013-11-29 19:31:00] Read of fd 3 returned 0
 [2013-11-29 19:31:00] nanofury_lowl_probe: Matched "(null)" serial "(null)", bu
t lowlevel driver is not mcp2210!
 [2013-11-29 19:31:00] hashbuster_lowl_probe: Matched "(null)" serial "(null)",
but lowlevel driver is not hid!
 [2013-11-29 19:31:00] hashbuster2_lowl_probe: Matched "(null)" serial "(null)",
 but lowlevel driver is not usb_generic!
 [2013-11-29 19:31:02] Probing for an alive pool
 [2013-11-29 19:31:03] Pool 0 http://pool1.us.multipool.us:3345 alive

 [2013-11-29 19:31:03] Network difficulty changed to 1 (13.44Mh/s)

 [2013-11-29 19:31:03] Stratum from pool 0 detected new block

 [2013-11-29 19:31:03] Pool 0 is hiding block contents from us

Please add

Code:

--debuglog --log-file 20131130-purelithium-debug.log

and send me the file.

[crazyearner]

Also not detecting hardware taken out of thread posted elsewhere reporting here.

I went and moved from cgminer and went soley on bfg miner what am saying is in new versin where you taken out cgminer I have updated to new version and it installs bfg miner etc however when i scan for hardware it dosent detect anything yet on previous version detected all me erupters and other bits using bfg miner however now updated and it apears its not scanning for hardware nore does it pick it up or give any errors

Can you please tell me what bfgminer 3.7 returns with this command:

Code:

bfgminer --device ? --scan erupter:all --scan opencl:auto --scan cpu:auto

Gives me the following..

[purelithium]

I get this output when running the git you linked to with my optimal scrypt settings that worked with 3.2.1, then it immediately crashes:

Code:

C:\Users\BigMiner\Desktop\New folder>bfgminer.exe --scrypt  -I 13,19,19,19 --thr
ead-concurrency 16384,22400,22400,22400 --gpu-engine 1045,1150,1050,1050 --gpu-m
emclock 1450,1420,1425,1425 -w 256,256,256,256 --auto-fan --failover-only --gpu-
powertune 0,20,20,20 --scan-serial all --scan-serial opencl:auto -o pool1.us.mul
tipool.us:3345 -u user -p "" -d 0 -d 1 -d 2 -d 3 -T
 [2013-11-29 19:30:51] Started bfgminer 3.7.0
 [2013-11-29 19:30:51] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-29 19:30:51] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-29 19:30:51] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-29 19:30:51] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-29 19:30:51] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-29 19:30:51] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-29 19:30:51] Failed to get PortName registry key value in lowl-vcom.c
_vcom_devinfo_scan_windows__hubport():443: The system cannot find the file speci
fied.

 [2013-11-29 19:30:51] Failed to ioctl (1) in lowl-vcom.c windows_usb_get_root_h
ub_path():497: The operation completed successfully.

 [2013-11-29 19:30:53] Twinfury: Not a valid response from device (-1)

 [2013-11-29 19:30:54] klondike_lowl_probe: Matched "(null)" serial "(null)", bu
t lowlevel driver is not usb!
 [2013-11-29 19:30:56] x6500_lowl_probe: Matched "(null)" serial "(null)", but l
owlevel driver is not ft232r!
 [2013-11-29 19:30:56] ztex_lowl_probe: Matched "(null)" serial "(null)", but lo
wlevel driver is not usb!
 [2013-11-29 19:31:00] Read of fd 3 returned 0
 [2013-11-29 19:31:00] nanofury_lowl_probe: Matched "(null)" serial "(null)", bu
t lowlevel driver is not mcp2210!
 [2013-11-29 19:31:00] hashbuster_lowl_probe: Matched "(null)" serial "(null)",
but lowlevel driver is not hid!
 [2013-11-29 19:31:00] hashbuster2_lowl_probe: Matched "(null)" serial "(null)",
 but lowlevel driver is not usb_generic!
 [2013-11-29 19:31:02] Probing for an alive pool
 [2013-11-29 19:31:03] Pool 0 http://pool1.us.multipool.us:3345 alive

 [2013-11-29 19:31:03] Network difficulty changed to 1 (13.44Mh/s)

 [2013-11-29 19:31:03] Stratum from pool 0 detected new block

 [2013-11-29 19:31:03] Pool 0 is hiding block contents from us

Please add

Code:

--debuglog --log-file 20131130-purelithium-debug.log

and send me the file.

Done, you should have it now. Looked at the log and I think it's crashing when compiling the scrypt bitstreams...

[noct]

I need the whole output from -D -d?

Code:

d:\Progs\bfgminer-3.7.0-win64>bfgminer -D -d?
 [2013-11-30 14:30:58] setrlimit: Not supported by platform
 [2013-11-30 14:30:58] Started bfgminer 3.7.0
 [2013-11-30 14:30:58] Loaded configuration file bfgminer.conf

 [2013-11-30 14:30:58] Fatal JSON error in configuration file.

 [2013-11-30 14:30:58] Configuration file could not be used.

 [2013-11-30 14:30:58] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-30 14:30:58] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-30 14:30:58] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-30 14:30:58] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-30 14:30:58] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-30 14:30:58] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-30 14:30:58] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-30 14:30:58] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-30 14:30:58] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-30 14:30:58] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-30 14:30:58] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-30 14:30:58] usb_devinfo_scan: Error getting USB string 1 (iManufactur
er): LIBUSB_ERROR_NOT_FOUND
 [2013-11-30 14:30:58] usb_devinfo_scan: Error getting USB string 2 (iProduct):
LIBUSB_ERROR_NOT_FOUND
 [2013-11-30 14:30:58] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-30 14:30:58] hidapi_try_lib: Couldn't load libhidapi.dll: unknown

 [2013-11-30 14:30:58] hidapi_try_lib: Successfully loaded libhidapi-0.dll

 [2013-11-30 14:30:58] hid_devinfo_scan: Found "Multitouch Vista" serial "1.0"

 [2013-11-30 14:30:58] hid_devinfo_scan: Found "USB OPTICAL MOUSE" serial "(null
)"
 [2013-11-30 14:30:58] hid_devinfo_scan: Found "USB Keyboard" serial "  "

 [2013-11-30 14:30:58] hid_devinfo_scan: Found "USB Keyboard" serial "  "

 [2013-11-30 14:30:58] hid_devinfo_scan: Found "USB Keyboard" serial "  "

 [2013-11-30 14:30:58] hid_devinfo_scan: Found "HashBuster.nano Project" serial
"       "
 [2013-11-30 14:30:59] Failed to get PortName registry key value in lowl-vcom.c
_vcom_devinfo_scan_windows__hubport():443: ═x єфpxЄё  эpщЄш єъpчpээ√щ Їpщы.

 [2013-11-30 14:30:59] FTD2XX.DLL failed to load, not using FTDI autodetect

 [2013-11-30 14:30:59] QueryDosDevice returned insufficent buffer error; enlargi
ng to 200
 [2013-11-30 14:30:59] QueryDosDevice returned insufficent buffer error; enlargi
ng to 400
 [2013-11-30 14:30:59] QueryDosDevice returned insufficent buffer error; enlargi
ng to 800
 [2013-11-30 14:30:59] QueryDosDevice returned insufficent buffer error; enlargi
ng to 1000
 [2013-11-30 14:30:59] QueryDosDevice returned insufficent buffer error; enlargi
ng to 2000
 [2013-11-30 14:30:59] QueryDosDevice returned insufficent buffer error; enlargi
ng to 4000
 [2013-11-30 14:30:59] lowlevel_scan: Found usb device at usb:006:002 (path=(nul
l), vid=fa04, pid=0011, manuf=(null), prod=(null), serial=(null))

 [2013-11-30 14:30:59] lowlevel_scan: Found usb device at usb:006:001 (path=(nul
l), vid=09da, pid=0260, manuf=(null), prod=(null), serial=(null))

 [2013-11-30 14:30:59] lowlevel_scan: Found usb device at usb:005:001 (path=(nul
l), vid=093a, pid=2510, manuf=(null), prod=(null), serial=(null))

 [2013-11-30 14:30:59] lowlevel_scan: Found usb device at usb:007:001 (path=(nul
l), vid=058f, pid=6362, manuf=(null), prod=(null), serial=(null))

 [2013-11-30 14:30:59] lowlevel_scan: Found usb device at usb:004:000 (path=(nul
l), vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))

 [2013-11-30 14:30:59] lowlevel_scan: Found usb device at usb:007:255 (path=(nul
l), vid=8086, pid=3a3a, manuf=(null), prod=(null), serial=(null))

 [2013-11-30 14:30:59] lowlevel_scan: Found usb device at usb:008:255 (path=(nul
l), vid=8086, pid=3a3c, manuf=(null), prod=(null), serial=(null))

 [2013-11-30 14:30:59] lowlevel_scan: Found usb device at usb:005:255 (path=(nul
l), vid=8086, pid=3a38, manuf=(null), prod=(null), serial=(null))

 [2013-11-30 14:30:59] lowlevel_scan: Found usb device at usb:002:255 (path=(nul
l), vid=8086, pid=3a35, manuf=(null), prod=(null), serial=(null))

 [2013-11-30 14:30:59] lowlevel_scan: Found usb device at usb:006:255 (path=(nul
l), vid=8086, pid=3a39, manuf=(null), prod=(null), serial=(null))

 [2013-11-30 14:30:59] lowlevel_scan: Found usb device at usb:003:255 (path=(nul
l), vid=8086, pid=3a36, manuf=(null), prod=(null), serial=(null))

 [2013-11-30 14:30:59] lowlevel_scan: Found usb device at usb:001:255 (path=(nul
l), vid=8086, pid=3a34, manuf=(null), prod=(null), serial=(null))

 [2013-11-30 14:30:59] lowlevel_scan: Found usb device at usb:004:255 (path=(nul
l), vid=8086, pid=3a37, manuf=(null), prod=(null), serial=(null))

 [2013-11-30 14:30:59] lowlevel_scan: Found hid device at hid:\\?\hid#vid_fa04&p
id_0011#6&11d06e40&1&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#v
id_fa04&pid_0011#6&11d06e40&1&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}, vid=f
a04, pid=0011, manuf=StarFury Laboratories, prod=HashBuster.nano Project, serial
=       )
 [2013-11-30 14:30:59] lowlevel_scan: Found hid device at hid:\\?\hid#vid_09da&p
id_0260&mi_01&col02#7&34c6cee6&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030} (pa
th=\\?\hid#vid_09da&pid_0260&mi_01&col02#7&34c6cee6&0&0001#{4d1e55b2-f16f-11cf-8
8cb-001111000030}, vid=09da, pid=0260, manuf= , prod=USB Keyboard, serial=
)
 [2013-11-30 14:30:59] lowlevel_scan: Found hid device at hid:\\?\hid#vid_09da&p
id_0260&mi_01&col01#7&34c6cee6&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} (pa
th=\\?\hid#vid_09da&pid_0260&mi_01&col01#7&34c6cee6&0&0000#{4d1e55b2-f16f-11cf-8
8cb-001111000030}, vid=09da, pid=0260, manuf= , prod=USB Keyboard, serial=
)
 [2013-11-30 14:30:59] lowlevel_scan: Found hid device at hid:\\?\hid#vid_09da&p
id_0260&mi_00#7&10ef9124&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?
\hid#vid_09da&pid_0260&mi_00#7&10ef9124&0&0000#{4d1e55b2-f16f-11cf-88cb-00111100
0030}, vid=09da, pid=0260, manuf= , prod=USB Keyboard, serial=  )

 [2013-11-30 14:30:59] lowlevel_scan: Found hid device at hid:\\?\hid#vid_093a&p
id_2510#6&29bc10d8&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\hid#v
id_093a&pid_2510#6&29bc10d8&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}, vid=0
93a, pid=2510, manuf=PIXART, prod=USB OPTICAL MOUSE, serial=(null))

 [2013-11-30 14:30:59] lowlevel_scan: Found hid device at hid:\\?\hid#unisofthid
device&col01#1&4784345&3&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} (path=\\?\h
id#unisofthiddevice&col01#1&4784345&3&0000#{4d1e55b2-f16f-11cf-88cb-001111000030
}, vid=dddd, pid=0001, manuf=Daniels Danilins, prod=Multitouch Vista, serial=1.0
)
 [2013-11-30 14:30:59] lowlevel_scan: Found vcom device at com:1 (path=\\.\COM1,
 vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))

 [2013-11-30 14:30:59] hashbuster_lowl_probe: Identify sequence didn't match on
\\?\hid#vid_fa04&pid_0011#6&11d06e40&1&0000#{4d1e55b2-f16f-11cf-88cb-00111100003
0}
 [2013-11-30 14:30:59] Devices detected:
 [2013-11-30 14:30:59] Timers: Using QueryPerformanceCounter

 [2013-11-30 14:30:59] Recalibrating timeofday offset (delta 1385769002.901117s)

0 devices listed

[Luke-Jr]

I get this output when running the git you linked to with my optimal scrypt settings that worked with 3.2.1, then it immediately crashes:

Code:

C:\Users\BigMiner\Desktop\New folder>bfgminer.exe --scrypt  -I 13,19,19,19 --thr
ead-concurrency 16384,22400,22400,22400 --gpu-engine 1045,1150,1050,1050 --gpu-m
emclock 1450,1420,1425,1425 -w 256,256,256,256 --auto-fan --failover-only --gpu-
powertune 0,20,20,20 --scan-serial all --scan-serial opencl:auto -o pool1.us.mul
tipool.us:3345 -u user -p "" -d 0 -d 1 -d 2 -d 3 -T
 [2013-11-29 19:30:51] Started bfgminer 3.7.0
 [2013-11-29 19:30:51] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-29 19:30:51] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-29 19:30:51] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-29 19:30:51] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-29 19:30:51] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-29 19:30:51] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_NOT_
SUPPORTED
 [2013-11-29 19:30:51] Failed to get PortName registry key value in lowl-vcom.c
_vcom_devinfo_scan_windows__hubport():443: The system cannot find the file speci
fied.

 [2013-11-29 19:30:51] Failed to ioctl (1) in lowl-vcom.c windows_usb_get_root_h
ub_path():497: The operation completed successfully.

 [2013-11-29 19:30:53] Twinfury: Not a valid response from device (-1)

 [2013-11-29 19:30:54] klondike_lowl_probe: Matched "(null)" serial "(null)", bu
t lowlevel driver is not usb!
 [2013-11-29 19:30:56] x6500_lowl_probe: Matched "(null)" serial "(null)", but l
owlevel driver is not ft232r!
 [2013-11-29 19:30:56] ztex_lowl_probe: Matched "(null)" serial "(null)", but lo
wlevel driver is not usb!
 [2013-11-29 19:31:00] Read of fd 3 returned 0
 [2013-11-29 19:31:00] nanofury_lowl_probe: Matched "(null)" serial "(null)", bu
t lowlevel driver is not mcp2210!
 [2013-11-29 19:31:00] hashbuster_lowl_probe: Matched "(null)" serial "(null)",
but lowlevel driver is not hid!
 [2013-11-29 19:31:00] hashbuster2_lowl_probe: Matched "(null)" serial "(null)",
 but lowlevel driver is not usb_generic!
 [2013-11-29 19:31:02] Probing for an alive pool
 [2013-11-29 19:31:03] Pool 0 http://pool1.us.multipool.us:3345 alive

 [2013-11-29 19:31:03] Network difficulty changed to 1 (13.44Mh/s)

 [2013-11-29 19:31:03] Stratum from pool 0 detected new block

 [2013-11-29 19:31:03] Pool 0 is hiding block contents from us

Please add

Code:

--debuglog --log-file 20131130-purelithium-debug.log

and send me the file.

Done, you should have it now. Looked at the log and I think it's crashing when compiling the scrypt bitstreams...

If it just ends abruptly like that on Windows, then it didn't crash...
My only guess is your OpenCL drivers called exit() for some reason.
If older versions work, we will need to bisect this issue while also ignoring the (different) bug you bisected earlier.
Unfortunately, automating this process is difficult... can you meet me on IRC?

[Luke-Jr]

Code:

 [2013-11-30 14:30:59] hashbuster_lowl_probe: Identify sequence didn't match on \\?\hid#vid_fa04&pid_0011#6&11d06e40&1&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}

This looks like a device-side issue, or something else interfering with BFGMiner talking to it.

[noct]

Code:

[2013-11-30 14:30:59] hashbuster_lowl_probe: Identify sequence didn't match on \\?\hid#vid_fa04&pid_0011#6&11d06e40&1&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}

This looks like a device-side issue, or something else interfering with BFGMiner talking to it.

Got same error with clear WinXP on netbook, but all work fine with Linux Mint, and under VirtualBox on main machine, with custom cgminer. Mb my boards have some custom firmware?

[Luke-Jr]

Code:

[2013-11-30 14:30:59] hashbuster_lowl_probe: Identify sequence didn't match on \\?\hid#vid_fa04&pid_0011#6&11d06e40&1&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}

This looks like a device-side issue, or something else interfering with BFGMiner talking to it.

Got same error with clear WinXP on netbook, but all work fine with Linux Mint, and under VirtualBox on main machine, with custom cgminer. Mb my boards have some custom firmware?

Ah, interesting. I'll go test on Windows then...