EWBF's CUDA Zcash miner

[sverox]

2nd scripts do this. Is enhanced variant of first one.

[dragonmike]

Brilliant, will use this, many thanks!

[dragonmike]

Can anyone share their 1080 clocks/voltages/hashrates using EWBF's Zcash miner please? Or point me to where I could check myself?

[PotShot-RSA]

I get the same result.
Why do I get -

INFO: Api: Disabled

when the miner starts? Do I need to change something there?

Are you using version 0.3.4b ?

[PotShot-RSA]

Can anyone share their 1080 clocks/voltages/hashrates using EWBF's Zcash miner please? Or point me to where I could check myself?

nvidiaInspector.exe -setPowerTarget:0,60
nvidiaInspector.exe -setBaseClockOffset:0,0,140
nvidiaInspector.exe -setMemoryClockOffset:0,0,988

So, Power at 60%, BaseClock +140, Mem +988

Have not tested to any limits yet.

I get 540 sols/s at  up to 160 watts peak but average 150W

[sublimus]

I get the same result.
Why do I get -

INFO: Api: Disabled

when the miner starts? Do I need to change something there?

:restart
Timeout /t 30
miner --server eu1-zcash.flypool.org --user t1cA38xyUxJRDdQYacD6x7UUL8nyjTfKeo1.GigaGamer --pass x --port 3333 --cuda_devices 0 1 --intensity  32 32 --eexit 3 --solver 0 --log 2 --logfile ZCASH.%date:~6,4%%date:~3,2%%date:~0,2%.ewbf.log --fee 2 --pec --api
ping 127.0.0.1
goto restart

[dtawom]

Is there a way to set the intensity on a per card basis rather than setting it for all cards?  I love the intensity addition, but the reason I wanted it is to set the intensity lower on one of my cards so I can still use my computer and stream video without buffering while keeping the other cards running at full speed.

[gilad215]

Did anyone manage to get 450 sol+ stable on a Hynix 1070? on less than 90% power?
i'm gettin 430+-

+150 clock
+500 Memory

Thanks

[EWBF_]

@EWBF_
Is it true that GPUs use only one of their CPUs to process the work?
A friend of mine read somewhere that Nvidia was preparing to release a cheap card that
would be equiped with a sole cpu for mining purpose only.

I do not quite understand what you mean, but each gpu works in a separate processor thread, and yes one cpu stream for one gpu. Plus a couple of threads for api, statistics and so on.

Is there a way to set the intensity on a per card basis rather than setting it for all cards?  I love the intensity addition, but the reason I wanted it is to set the intensity lower on one of my cards so I can still use my computer and stream video without buffering while keeping the other cards running at full speed.

--intensity 1 64 64 64 64 64
The first gpu will use the intensity 1, all the others 64.

[Amph]

EWBF, why you don't release the source already?

[LuisMafixD]

I am having a tough time understanding how to use API.

Added http api you can use http://127.0.0.1:42000/getstat address to get statistics.

This is the result -

This site can’t be reached
127.0.0.1 refused to connect.

so here is my command line -

:restart
Timeout /t 30
miner --server us1-zcash.flypool.org --user t1ZLXNkPtzjAg2GbjvTsU7KxbuuTwsegrYR.gronk5 --pass x --port 3333 --eexit 3 --solver 0 --log 2 --intensity 64 --api 127.0.0.1:4200 --logfile ZCASH.%date:~6,4%%date:~3,2%%date:~0,2%.ewbf.log --fee 2 --pec
ping 10.0.0.9 > nul
goto :restart

This is what I get when the miner starts



What is this command for?
I know that you are doing ping, does that mean that if you do not have a connection or crashes the miner restarts?

ping 10.0.0.9 > nul

INFO: Server: us1-zcash.flypool.org:3333
INFO: Solver User defined.
INFO: Devices: All.
INFO: Temperature limit: 90
INFO: Api: Disabled


What do I need to do to enable API? Something on the this end? Something on the mining end?

TIA

Just use http://127.0.0.1:42000

What is this command for?
I know that you are doing ping, does that mean that if you do not have a connection or crashes the miner restarts?

ping 10.0.0.9 > nul

[EWBF_]

EWBF, why you don't release the source already?

I have plans to use this code in other miners, it contains a couple of my libraries, and i definitely do not want to publish my libraries, but without these libraries, the code must be completely rewritten.

[_javi_]

thanks for your work , EWBF.

Please try to fix the 0 sols/s bug. Miner keeps failing to restart when in such state.

[LuisMafixD]

@EWBF_
Is it true that GPUs use only one of their CPUs to process the work?
A friend of mine read somewhere that Nvidia was preparing to release a cheap card that
would be equiped with a sole cpu for mining purpose only.

I do not quite understand what you mean, but each gpu works in a separate processor thread, and yes one cpu stream for one gpu. Plus a couple of threads for api, statistics and so on.

Is there a way to set the intensity on a per card basis rather than setting it for all cards?  I love the intensity addition, but the reason I wanted it is to set the intensity lower on one of my cards so I can still use my computer and stream video without buffering while keeping the other cards running at full speed.

--intensity 1 64 64 64 64 64
The first gpu will use the intensity 1, all the others 64.

I have 6 VGA 1070 in rig. 5 of them mark simultaneously from 490 to 510 sol / s A single VGA always be on the 380 to 420, you have the solution?

[Acrefawn]

Today catch this 2 times.

Code:

INFO: Detected new work: ff423c999b44ca89cbc7
Temp: GPU0 62C GPU1 63C GPU2 67C 
GPU0: 325 Sol/s GPU1: 328 Sol/s GPU2: 324 Sol/s 
Total speed: 977 Sol/s
INFO 14:50:55: GPU2 Accepted share 63ms [A:383, R:2]
Temp: GPU0 62C GPU1 63C GPU2 67C 
GPU0: 330 Sol/s GPU1: 331 Sol/s GPU2: 325 Sol/s 
Total speed: 986 Sol/s
CUDA: Device: 2 Thread exited with code: 4
CUDA: Device: 1 Thread exited with code: 4
CUDA: Device: 0 Thread exited with code: 4
ERROR: Looks like GPU2 are stopped. Restart attempt.
INFO: GPU2 are restarted.

Help please resolve this promblem, or explain what does it mean.
Thank you!

[dragonmike]

Can anyone share their 1080 clocks/voltages/hashrates using EWBF's Zcash miner please? Or point me to where I could check myself?

nvidiaInspector.exe -setPowerTarget:0,60
nvidiaInspector.exe -setBaseClockOffset:0,0,140
nvidiaInspector.exe -setMemoryClockOffset:0,0,988

So, Power at 60%, BaseClock +140, Mem +988

Have not tested to any limits yet.

I get 540 sols/s at  up to 160 watts peak but average 150W

That is pretty awesome. Thanks for sharing. Out of curiosity, why nvidia inspector and not eg. MSI AB?

[bf-jack]

I am having a tough time understanding how to use API.

Added http api you can use http://127.0.0.1:42000/getstat address to get statistics.

This is the result -

This site can’t be reached
127.0.0.1 refused to connect.

so here is my command line -

:restart
Timeout /t 30
miner --server us1-zcash.flypool.org --user t1ZLXNkPtzjAg2GbjvTsU7KxbuuTwsegrYR.gronk5 --pass x --port 3333 --eexit 3 --solver 0 --log 2 --intensity 64 --api 127.0.0.1:4200 --logfile ZCASH.%date:~6,4%%date:~3,2%%date:~0,2%.ewbf.log --fee 2 --pec
ping 10.0.0.9 > nul
goto :restart

This is what I get when the miner starts

INFO: Server: us1-zcash.flypool.org:3333
INFO: Solver User defined.
INFO: Devices: All.
INFO: Temperature limit: 90
INFO: Api: Disabled


What do I need to do to enable API? Something on the this end? Something on the mining end?

TIA

Your command line to start ewbf says 4200, maybe should be 42000 ?

Also, at least on my win10 with Chrome, I just say "localhost:42000" in the address line. Neither 127.0.0.1 or the actual IP address work.

[nikola49]

I have issues with this miner on GTX 1080 Ti. Sometimes it randomly stops working, but I solved it by disabling dev fee.
It doesn't want to use my card correctly, instead it uses 55% power and ignores core OC settings in afterburner.
If I manage to 'safely' crash and restart nvidia driver, it works fine. Using 382.53

[Cyrex_888]

So absolute noob to the whole mining business...i just had a 980ti and decided i should give it a shot...i made a wallet and copied my Zcash address. I edited the fypool.bat and pasted my address instead of the existing one in front of "--user" and saved it while touching nothing else...I've left it running and I'm getting between 410-440sol...so have i done it correctly or have i missed something?

[Aureliusy]

Was running ok with 6 cards for weeks ... Apparently Error 42 and 30 did happen yesterday. System was 0 sol while using full WAttage. and 1 card has gone.
Only seem to detect 5 cards. I did a DDU and did install new drivers, but still only seem to detect 5 cards. I did check cables and cards. They are ok