EWBF's CUDA Zcash miner

[MoDBerry]

Morning all

So a bit stuck have read through the forum but cannot find a fix

same as the rest
cannot resolve hostname
have changed the bat. file
weird thing is rig 1 stopped mining this morning with this issue then 4 hours later my second rig crashed with the same issue

EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal 0x60a13d58de7f7b9a5f85969bd00b4daaf3b70b5f.MoD/email -epsw x -mode 1 -ftime 10
ive tried the other eu server and port even a us and still no connection


ive purposely removed the email

unsure of what else to do
Thanks in advance

#this comes up on the log#
09:42:47:281   1d48   Cannot resolve 'eth-eu1.nanopool.org'
09:42:47:281   1d48   ETH: Stratum - Cannot connect to eth-eu1.nanopool.org:9999
09:42:47:281   1d48   ETH: Stratum - Failed to connect, retry in 20 sec...
09:43:05:381   4198   GPU0 t=24C fan=76%
09:43:05:381   4198   em hbt: 28140, fm hbt: 0,
09:43:05:381   4198   watchdog - thread 0 (gpu0), hb time 125
09:43:05:381   4198   watchdog - thread 1 (gpu0), hb time 125


##nanopool servers are down asia is the only one online##

[Atronoss]

The Titan V tensor cores are Floating Point - dunno if they can be used at all for Integer type work like ALL CRYPTOCOIN MINING uses.
They also are optimized and designed to do "matrix math" - which has NOTHING to do with the straight adds/rotates/move the date work used in Cryptocoin mining.

nheqminer hasn't been updated for a long time - it's not a good basis for comparison any more.
The current miners to compare are EBWF, this one, and that new BMiner thing for Windows.
I forget if Zawata's new miner works on equihash at all, if so might want to include it in the list.

You forget to mention DSTM ZecMiner... on some cards it is faster, than EWBF, especially on 1060 and it still has active development. I never heard of BMiner though, I have to check that.

[QuintLeo]

Actually, I forgot which thread I was in, and should have mentioned DSTM and "this one" instead of mentioning EBWF twice (once by name, once as "this one").

[belcelou]

Hello, I just switched one of my rigs to this zcash miner and I have a question about power usage.

I have six gtx 1070 (8gb) and a 1000w psu; this is plenty for ethereum but I have read it is cutting it close for zec.

Currently my settings on afterburner are:

• 0% core voltage
• 60% power limit
• 70C temp limit
• +500 memory clock
• 60% fan speed

I am getting no issues whatsoever and getting 2400 sol/s with the miner. Should I be concerned or does this look ok?

GPUs stay at about 50C-62C, so I am definitely not cranking them up as much. Afterburner estimates each gpu draws 830mV.

Other: celeron cpu, z270 sli plus mobo, 4gb mem, 120gb ssd.

Thanks in advance for the advice.

[miningspeed]

http://www.miningspeed.com/miningspeed.png

Miningspeed made an automatic bat maker for EWBF.
http://www.miningspeed.com/launcher.jpg

Is asks you for a few simple questions:
You fill in the Coin you want to mine, the region your in, and the batch wil automatically make
 a second bat to launch it with 1 click afterwarths!

No hassle with trying to setup things!

Miners will mine straight to https://pool.miningspeed.com , wich has 0.4% fee

The bat generator:
EWBF bat generator

[Elisaly]

hello guys ,

i have a sadly issue , every day a problem with my miner stop or hang and i lose 4-8 hours every day till i discover it once i see the miner hang not give new work to mine or share only press enter and reconnect again and keep on mining

any help to solve this problem or can some one provide me with a command can write in miner to reconncet automatically every 4 hours for example

some time hang after 4 hours some time after 12 hours once it stop i was sleeping when wake up i disappointed with the time which  the miner was stop working

any help i appreciated that...

[LyuboA]

what about and update to the miner for cuda 9.0

[sublimus]

Morning all

So a bit stuck have read through the forum but cannot find a fix

same as the rest
cannot resolve hostname
have changed the bat. file
weird thing is rig 1 stopped mining this morning with this issue then 4 hours later my second rig crashed with the same issue

EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal 0x60a13d58de7f7b9a5f85969bd00b4daaf3b70b5f.MoD/email -epsw x -mode 1 -ftime 10
ive tried the other eu server and port even a us and still no connection


ive purposely removed the email

unsure of what else to do
Thanks in advance

#this comes up on the log#
09:42:47:281   1d48   Cannot resolve 'eth-eu1.nanopool.org'
09:42:47:281   1d48   ETH: Stratum - Cannot connect to eth-eu1.nanopool.org:9999
09:42:47:281   1d48   ETH: Stratum - Failed to connect, retry in 20 sec...
09:43:05:381   4198   GPU0 t=24C fan=76%
09:43:05:381   4198   em hbt: 28140, fm hbt: 0,
09:43:05:381   4198   watchdog - thread 0 (gpu0), hb time 125
09:43:05:381   4198   watchdog - thread 1 (gpu0), hb time 125


##nanopool servers are down asia is the only one online##

EthDcrMiner64.exe?
This EWBF's algo thread.

[QuintLeo]

Doesn't your pool support ZEC itself?

[QuintLeo]

what about and update to the miner for cuda 9.0

 How many card models support CUDA 9.0 to date?

 Also have to wonder if it would offer any significant performance increase, IF at all - sometimes a "CUDA" compute upgrade is about adding FEATURES not better efficiency.

[LyuboA]

what about and update to the miner for cuda 9.0

 How many card models support CUDA 9.0 to date?

 Also have to wonder if it would offer any significant performance increase, IF at all - sometimes a "CUDA" compute upgrade is about adding FEATURES not better efficiency.

It does give performance boost for CCMiner so maybe it will here

[choff5507]

Where can I get a complete list of the parameters available for the EWBF miner?


Also, what was the final word on the dev fee for this miner? Does setting a manual value like 0.1 set it lower to the otherwise default value?


TIA

[yelken]

what about and update to the miner for cuda 9.0

 How many card models support CUDA 9.0 to date?

 Also have to wonder if it would offer any significant performance increase, IF at all - sometimes a "CUDA" compute upgrade is about adding FEATURES not better efficiency.

It does give performance boost for CCMiner so maybe it will here

Can't we use CCMiner for Zclassic mining ?

[QuintLeo]

Also, what was the final word on the dev fee for this miner? Does setting a manual value like 0.1 set it lower to the otherwise default value?

 It seems to work on the LINUX version - I only have one Windows machine using EBWF and haven't bothered taking the time to check on a single-card gaming rig....

[poNgz0r]

Im using EWBF 0.34b for quiet a while now. Everything seems to be oke but sometimes the API crashes. I have bound the API to a public port so i can see the stats. Normally when i access the API url the stats are shown but  sometimes when i try to access to URL the page is offline. Once this happens i can only see my stats if i restart the mining script which i prefer not to do. Does anyone else has this experience?

[niceacrobtc]

Miningspeed made an automatic bat maker for EWBF.


Is asks you for a few simple questions:
You fill in the Coin you want to mine, the region your in, and the batch wil automatically make
 a second bat to launch it with 1 click afterwarths!

No hassle with trying to setup things!

Miners will mine straight to https://pool.miningspeed.com , wich has 0.4% fee

The bat generator:
EWBF bat generator

hi,

i see that kind of error on your websites:

Error 503 Backend fetch failed
Backend fetch failed

Guru Meditation

[Bluemustang]

I downloaded 0.3.4b and setup a mining pool and created a worker. When i make zero changes and just open a pool (be it suprnova, miningpoolhub, whatever) it works and starts mining. But when i change nothing at all but add my workers user and pass the cmd window shuts down the second it opens.

Any advice? Thank you.

[crypper]

I downloaded 0.3.4b and setup a mining pool and created a worker. When i make zero changes and just open a pool (be it suprnova, miningpoolhub, whatever) it works and starts mining. But when i change nothing at all but add my workers user and pass the cmd window shuts down the second it opens.

Any advice? Thank you.

add pause at the end of the bat file => that will allow you to see the error. Most likely incorrect syntax of the bat results in failure to authenticate you on the server. Post your bat here and the error you get

[josh_ramone]

Hi guys,

I am new on mining criptocurrencies. I am starting with BTCZ and I want to start it using the EWBF's CUDA for Nvidia. I have a GTX 770 and I would like to try it out. Following the getting started (https://btczpool.com/getting_started) page of BTCZ, I have downloaded the miner (EWBF Miner for NVIDIA GPUs (Equihash Version) (Version 0.3.4b - last version) and configured a .bat file pointing to my wallet hash that I have generated using ZenCash (for BTCZ). It looks fine and I have my keys. I am trying to start miner using the following command:

miner --server btczpool.com --port 3032 --user xxxxxxxx.Nvidia01 --pass x --pec

Where xxxxx is my wallet hash. I add a pause on .bat file and I have got the error:

+-------------------------------------------------+
|         EWBF's Zcash CUDA miner. 0.3.4b         |
+-------------------------------------------------+
INFO: Current pool: btczpool.com:3032
INFO: Selected pools: 1
INFO: Solver: Auto.
INFO: Devices: All.
INFO: Temperature limit: 90
INFO: Api: Disabled
---------------------------------------------------
INFO: Target: 00a0000000000000...
INFO: Detected new work: df1f
ERROR: Stratum authorization error

I do not know what to do, I research in some forums like this one but no solution. I do not know if I have to provide something related with my wallet, because I tried to perform the same command using a wallet of a friend and it worked fine on my PC.

Is there something I forgot to do? Or something I can try?

I read something about workder, how do I setup a worker (if I have to do it)?

Thank you guys.

[clt]

Hi guys,

I'm mining with KFA2 GTX1080 2050 core 4400 mem on windows10 x64. After some prolonged mining session my hashrate drops from 600 to 520. I checked the afterburner and saw that card is running at 1650 core (which is the default core clock) and utilizing only 45% or 50% TDP. Profile switching under afterburner doesn't responds it just mines at 50% TDP utilization. Also checked GPU-Z and there is no throttlling in regards of VRel, Temp etc. Memory works as intended at 4400 and sliding memory bar responds but core is stuck and gives no fuck about anything. Restarting miner doesn't helps only restarting pc. Anyone got any idea? Is it related to nvidia drivers or some malfunction with my gpu? Thanks.