EWBF's CUDA Zcash miner

[ComputerGenie]

Hello.

INFO 16:39:28: GPU0 DevFee Accepted share
INFO 16:39:29: GPU0 DevFee Accepted share
INFO 16:39:29: GPU0 DevFee Accepted share
INFO 16:39:30: GPU0 DevFee Accepted share
INFO 16:39:30: GPU0 DevFee Accepted share

5 consecutive sends... 2%

If 5 shares in 2 seconds = 2%, then you have your diff set way too low and you're flooding the piss out of your pool sending 250 shares per second per GPU.

Is's actually 125 shares/sec  

Yeah, well, that's what I get for using "common core"; but, anyway....
Both are stupid numbers pointlessly flooding the server  

[crypper]

Hello.

INFO 16:39:28: GPU0 DevFee Accepted share
INFO 16:39:29: GPU0 DevFee Accepted share
INFO 16:39:29: GPU0 DevFee Accepted share
INFO 16:39:30: GPU0 DevFee Accepted share
INFO 16:39:30: GPU0 DevFee Accepted share

5 consecutive sends... 2%

If 5 shares in 2 seconds = 2%, then you have your diff set way too low and you're flooding the piss out of your pool sending 250 shares per second per GPU.

Is's actually 125 shares/sec  

Yeah, well, that's what I get for using "common core"; but, anyway....
Both are stupid numbers pointlessly flooding the server  

I see. Actually at first I thought you were just trolling the guy, but now I think you just didn't get his message. That was just another noob trying to complain about higher than advertised dev fees. Noobs usually count number of their shares vs devs shares and correlate that ratio to 2% dev fee. When the ratio is not 50/1 (and it actually never is) they accuse the dev of cheating with fees. That was the OP's message.

[sergey1301]

333SOl / s will be faster than a nicehashminer. I get an error at 280sol at 1070, I'll try to overclock override. Has received 312 Sol at 1080 (changed the card)

[JaredKaragen]

does anyone else think this thread should be locked and a final post stating to refer to previous complaints as well as dev abandonment be made?

I know it may work;  but use anything other than EWBF;  save yourself the headache.....  especially considering the early versions' trojans.

Absolutely. The thread should be closed.
Admins please do so.

The last 10 pages are complaints from noobs (who do not understand mining) about issues not related to the miner.

[Guy Montag]

 if the pool isn't listed it wont connect

[chup]

Hello.

INFO 16:39:28: GPU0 DevFee Accepted share
INFO 16:39:29: GPU0 DevFee Accepted share
INFO 16:39:29: GPU0 DevFee Accepted share
INFO 16:39:30: GPU0 DevFee Accepted share
INFO 16:39:30: GPU0 DevFee Accepted share

5 consecutive sends... 2%

For 0.1 ZEC per rig I can make You have 0% devfee and never see single DevFee Accepted share with EWBF.

[ComputerGenie]

For 0.1 ZEC per rig I can make You have 0% devfee and never see single DevFee Accepted share with EWBF.

the rest of us can do that for 0.00000000 ZEC

Code:

miner --fee 0 --server some_server --port some_port --user some_user_name --pass x

[giovinco]

So to sum up, still no Zcash miner wthout devfee??

[ComputerGenie]

So to sum up, still no Zcash miner wthout devfee??

I've been using it for a year and never paid any fees.

[crypper]

So to sum up, still no Zcash miner wthout devfee??

I've been using it for a year and never paid any fees.

Bad boy! The dev put a lot of his time into this project and deserves to be rewarded. At least reward him by not encouraging others to avoid fees (or at least don't do it for free) 
Chup was going to donate half of his reward of 0.1 Zec to dev (I strongly believe in that)

[giovinco]

So to sum up, still no Zcash miner wthout devfee??

I've been using it for a year and never paid any fees.

Will check it today, thank you for the parameters, very helpful.

[ComputerGenie]

So to sum up, still no Zcash miner wthout devfee??

I've been using it for a year and never paid any fees.

Bad boy! The dev put a lot of his time into this project and deserves to be rewarded. At least reward him by not encouraging others to avoid fees (or at least don't do it for free) 
Chup was going to donate half of his reward of 0.1 Zec to dev (I strongly believe in that)

Well, if anyone ever read the ANN, they'd see that was added 2 versions back and it's not any type of secret or anything. 

[nitrobg]

For 0.1 ZEC per rig I can make You have 0% devfee and never see single DevFee Accepted share with EWBF.

the rest of us can do that for 0.00000000 ZEC

Code:

miner --fee 0 --server some_server --port some_port --user some_user_name --pass x

Did you know that the miner simply mines the devfee into a black hole if you select --fee 0? You're not earning more, the dev is just earning less.

[ComputerGenie]

For 0.1 ZEC per rig I can make You have 0% devfee and never see single DevFee Accepted share with EWBF.

the rest of us can do that for 0.00000000 ZEC

Code:

miner --fee 0 --server some_server --port some_port --user some_user_name --pass x

Did you know that the miner simply mines the devfee into a black hole if you select --fee 0? You're not earning more, the dev is just earning less.

Did you know that no one that actually read this thread thought it did earn you more?  

[crypper]

For 0.1 ZEC per rig I can make You have 0% devfee and never see single DevFee Accepted share with EWBF.

the rest of us can do that for 0.00000000 ZEC

Code:

miner --fee 0 --server some_server --port some_port --user some_user_name --pass x

Did you know that the miner simply mines the devfee into a black hole if you select --fee 0? You're not earning more, the dev is just earning less.

Wow, and just when you though you had already seen all kinds of bulls**t in this thread....you get surprised again  

[chup]

For 0.1 ZEC per rig I can make You have 0% devfee and never see single DevFee Accepted share with EWBF.

the rest of us can do that for 0.00000000 ZEC

Code:

miner --fee 0 --server some_server --port some_port --user some_user_name --pass x

Of course, I just wanted to compensate my disturbance of reading again and again noobs complaints about EWBF fees...

[shotkina]

Guys , how to set temperature limit ? what command ?

[ComputerGenie]

Guys , how to set temperature limit ? what command ?

--tempunits         Temperature units, allowed values: C for celsius, F for fahrenheit and K for kelvin ).
--templimit         Temperature limit, gpu will be stopped if this limit is reached.

Just like it says in the help file you downloaded  

[rodney2250]

Hey guys,

I am the developer of rig-monitor (see here: https://bitcointalk.org/index.php?topic=2128602.0) and I a, looking o add EWBF support to it. Could someone share an example of the json output together with an example of the API query?

Thanks a lot

[ComputerGenie]

Hey guys,

I am the developer of rig-monitor (see here: https://bitcointalk.org/index.php?topic=2128602.0) and I a, looking o add EWBF support to it. Could someone share an example of the json output together with an example of the API query?

Thanks a lot

Code:

http://192.168.1.16:42000/getstat

Code:

{
	"method": "getstat",
	"error": null,
	"start_time": 1527870255,
	"current_server": "localhost:9998",
	"available_servers": 1,
	"server_status": 1,
	"result": [{
			"gpuid": 0,
			"cudaid": 0,
			"busid": "0000:01:00.0",
			"name": "GeForce GTX 1080",
			"gpu_status": 2,
			"solver": 0,
			"temperature": 68,
			"gpu_power_usage": 195,
			"speed_sps": 512,
			"accepted_shares": 10010,
			"rejected_shares": 0,
			"start_time": 1527976217
		}, {
			"gpuid": 1,
			"cudaid": 1,
			"busid": "0000:81:00.0",
			"name": "GeForce GTX 1080",
			"gpu_status": 2,
			"solver": 0,
			"temperature": 62,
			"gpu_power_usage": 198,
			"speed_sps": 506,
			"accepted_shares": 10956,
			"rejected_shares": 0,
			"start_time": 1527870256
		}, {
			"gpuid": 2,
			"cudaid": 2,
			"busid": "0000:82:00.0",
			"name": "GeForce GTX 1080",
			"gpu_status": 2,
			"solver": 0,
			"temperature": 64,
			"gpu_power_usage": 197,
			"speed_sps": 508,
			"accepted_shares": 10898,
			"rejected_shares": 0,
			"start_time": 1527870256
		}
	]
}