|
UnclWish
|
 |
January 21, 2018, 11:15:12 PM |
|
And it's stll need to setup every thread individually for cryptonight.
It turned out it has nothing to do with performance, so I won't do it. You're right. But not for all cards it useless. For Vega's it's needed. And I want ot try different intensity for each thread on my 270X 4Gb. |
|
|
|
|
Darek90
Newbie
 Offline
Activity: 8
Merit: 0
|
|
January 21, 2018, 11:15:26 PM |
|
excellent miner with last version 6 rx570 5.880 h cryptonight
What cards and what setup are u runing(raw intensity,driver,bios and so on)? |
|
|
|
|
|
UnclWish
|
|
January 21, 2018, 11:16:07 PM |
|
excellent miner with last version 6 rx570 5.880 h cryptonight
What memory size and type on your cards? |
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
January 22, 2018, 05:36:33 AM |
|
I think I found the root cause of instability. A fix is on its way!
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ |
|
|
|
rascabily
|
|
January 22, 2018, 06:04:11 AM |
|
I think I found the root cause of instability. A fix is on its way!
Good work!! |
|
|
|
|
maverik77
Newbie
Offline
Activity: 31
Merit: 0
|
|
January 22, 2018, 10:25:59 AM |
|
I'm running with 6 570 4gb itx pulse memory elpida
windows 10 drivers 17.1 intensity 112 bios made by me
|
|
|
|
|
|
thin
|
|
January 22, 2018, 10:27:48 AM |
|
exception found in the log, after exception mining had stopped. Version 1.1.21
2018-01-22 10:13:31.1897 [4] Exception in Stratum.Connect(): System.ArgumentException: The output char buffer is too small to contain the decoded characters, encoding 'US-ASCII' fallback 'System.Text.DecoderReplacementFallback'.
Parameter name: chars
at System.Text.Encoding.ThrowCharsOverflow()
at System.Text.Encoding.ThrowCharsOverflow(DecoderNLS decoder, Boolean nothingDecoded)
at System.Text.ASCIIEncoding.GetChars(Byte* bytes, Int32 byteCount, Char* chars, Int32 charCount, DecoderNLS decoder)
at System.Text.DecoderNLS.GetChars(Byte[] bytes, Int32 byteIndex, Int32 byteCount, Char[] chars, Int32 charIndex, Boolean flush)
at System.Text.DecoderNLS.GetChars(Byte[] bytes, Int32 byteIndex, Int32 byteCount, Char[] chars, Int32 charIndex)
at System.IO.StreamReader.ReadBuffer()
at System.IO.StreamReader.ReadLine()
at GatelessGateSharp.CryptoNightStratum.Authorize()
at GatelessGateSharp.Stratum.Connect()
2018-01-22 10:13:31.2835 [28] Exception in Stratum.StreamReaderThread(): System.ArgumentException: The output char buffer is too small to contain the decoded characters, encoding 'US-ASCII' fallback 'System.Text.DecoderReplacementFallback'.
Parameter name: chars
at System.Text.Encoding.ThrowCharsOverflow()
at System.Text.Encoding.ThrowCharsOverflow(DecoderNLS decoder, Boolean nothingDecoded)
at System.Text.ASCIIEncoding.GetChars(Byte* bytes, Int32 byteCount, Char* chars, Int32 charCount, DecoderNLS decoder)
at System.Text.DecoderNLS.GetChars(Byte[] bytes, Int32 byteIndex, Int32 byteCount, Char[] chars, Int32 charIndex, Boolean flush)
at System.Text.DecoderNLS.GetChars(Byte[] bytes, Int32 byteIndex, Int32 byteCount, Char[] chars, Int32 charIndex)
at System.IO.StreamReader.ReadBuffer()
at System.IO.StreamReader.ReadLine()
at GatelessGateSharp.Stratum.StreamReaderThread()
2018-01-22 10:13:53.1611 [7] Exception in Stratum.StreamReaderThread(): System.ArgumentException: The output char buffer is too small to contain the decoded characters, encoding 'US-ASCII' fallback 'System.Text.DecoderReplacementFallback'.
Parameter name: chars
at System.Text.Encoding.ThrowCharsOverflow()
at System.Text.Encoding.ThrowCharsOverflow(DecoderNLS decoder, Boolean nothingDecoded)
at System.Text.ASCIIEncoding.GetChars(Byte* bytes, Int32 byteCount, Char* chars, Int32 charCount, DecoderNLS decoder)
at System.Text.DecoderNLS.GetChars(Byte[] bytes, Int32 byteIndex, Int32 byteCount, Char[] chars, Int32 charIndex, Boolean flush)
at System.Text.DecoderNLS.GetChars(Byte[] bytes, Int32 byteIndex, Int32 byteCount, Char[] chars, Int32 charIndex)
at System.IO.StreamReader.ReadBuffer()
at System.IO.StreamReader.ReadLine()
at GatelessGateSharp.Stratum.StreamReaderThread()
2018-01-22 10:13:53.2705 [27] Exception in Stratum.StreamReaderThread(): System.ArgumentException: The output char buffer is too small to contain the decoded characters, encoding 'US-ASCII' fallback 'System.Text.DecoderReplacementFallback'.
Parameter name: chars
at System.Text.Encoding.ThrowCharsOverflow()
at System.Text.Encoding.ThrowCharsOverflow(DecoderNLS decoder, Boolean nothingDecoded)
at System.Text.ASCIIEncoding.GetChars(Byte* bytes, Int32 byteCount, Char* chars, Int32 charCount, DecoderNLS decoder)
at System.Text.DecoderNLS.GetChars(Byte[] bytes, Int32 byteIndex, Int32 byteCount, Char[] chars, Int32 charIndex, Boolean flush)
at System.Text.DecoderNLS.GetChars(Byte[] bytes, Int32 byteIndex, Int32 byteCount, Char[] chars, Int32 charIndex)
at System.IO.StreamReader.ReadBuffer()
at System.IO.StreamReader.ReadLine()
at GatelessGateSharp.Stratum.StreamReaderThread()
|
|
|
|
|
Darek90
Newbie
Offline
Activity: 8
Merit: 0
|
|
January 22, 2018, 01:07:27 PM |
|
I'm running with 6 570 4gb itx pulse memory elpida
windows 10 drivers 17.1 intensity 112 bios made by me
Thats impressive, can u pls explain how did u modded bios,with 1500straps,one click or something else? |
|
|
|
|
treanski
Full Member
Offline
Activity: 364
Merit: 106
ONe Social Network.
|
|
January 22, 2018, 01:13:52 PM |
|
I'm running with 6 570 4gb itx pulse memory elpida
windows 10 drivers 17.1 intensity 112 bios made by me
Thats impressive, can u pls explain how did u modded bios,with 1500straps,one click or something else? strapeditor, just copy 1500straps up give you shit on cryptonight. its alot of work to make custom straps so nobody will share for free, everything you get for free or find with google is bullshit |
|
|
|
Darek90
Newbie
Offline
Activity: 8
Merit: 0
|
|
January 22, 2018, 01:34:54 PM |
|
I'm running with 6 570 4gb itx pulse memory elpida
windows 10 drivers 17.1 intensity 112 bios made by me
Thats impressive, can u pls explain how did u modded bios,with 1500straps,one click or something else? strapeditor, just copy 1500straps up give you shit on cryptonight. its alot of work to make custom straps so nobody will share for free, everything you get for free or find with google is bullshit im using polaris 1 click option,it gives me the best timings but having problems with raw intensity,it freezes my rig on higher values, using strix 570 4g btw |
|
|
|
|
maverik77
Newbie
Offline
Activity: 31
Merit: 0
|
|
January 22, 2018, 01:42:17 PM |
|
I could go even more on type 1000h each card but there are some errors in more then I prefer to stay on 970h with consumption about 800w
overtool 1240 910 memory 2060 910
|
|
|
|
|
treanski
Full Member
Offline
Activity: 364
Merit: 106
ONe Social Network.
|
|
January 22, 2018, 01:51:45 PM |
|
I could go even more on type 1000h each card but there are some errors in more then I prefer to stay on 970h with consumption about 800w
overtool 1240 910 memory 2060 910
800watts for this speed is very much, so you overclock hard to achive that speed... |
|
|
|
maverik77
Newbie
Offline
Activity: 31
Merit: 0
|
|
January 22, 2018, 02:02:37 PM |
|
I do not pay the current ....
|
|
|
|
|
|
batko
|
|
January 22, 2018, 02:59:53 PM |
|
I have RX 480 1235/2000 -0.925v about 750khs -neoscrypt
Great miner thanks!
|
Donation: ETH: 0x0c8ce94dd3d1bfd09c0f887559c61d1b551e4b4d
|
|
|
|
UnclWish
|
|
January 22, 2018, 04:05:19 PM |
|
I could go even more on type 1000h each card but there are some errors in more then I prefer to stay on 970h with consumption about 800w
overtool 1240 910 memory 2060 910
Why 910mV? As I know the recommended values for core and memory voltage is 850,862,875,887,900,912,925 etc. It's devide by 0.25mv/2. Can controllers change voltage so small steps as 0,01mV? |
|
|
|
|
treanski
Full Member
Offline
Activity: 364
Merit: 106
ONe Social Network.
|
|
January 22, 2018, 04:24:49 PM |
|
I could go even more on type 1000h each card but there are some errors in more then I prefer to stay on 970h with consumption about 800w
overtool 1240 910 memory 2060 910
Why 910mV? As I know the recommended values for core and memory voltage is 850,862,875,887,900,912,925 etc. It's devide by 0.25mv/2. Can controllers change voltage so small steps as 0,01mV? you can adjust with ab or trixx +-100 |
|
|
|
|
UnclWish
|
|
January 22, 2018, 04:45:04 PM |
|
I could go even more on type 1000h each card but there are some errors in more then I prefer to stay on 970h with consumption about 800w
overtool 1240 910 memory 2060 910
Why 910mV? As I know the recommended values for core and memory voltage is 850,862,875,887,900,912,925 etc. It's devide by 0.25mv/2. Can controllers change voltage so small steps as 0,01mV? you can adjust with ab or trixx +-100 But 100 is not a limit... -100 it's 950-1050 mV. On Sapphire RX 580 Nitro+ 8Gb(Hynix) I use 1250/2125MHz with voltages 875/850mV. On cryptonight lower than 100W power cons. If use HWInfo, it show that core voltage jumps by steps by 0,12-0,13V. I think that setting 910mV will give 912mV. So as 911-917. But it's not exactly... and need to check... |
|
|
|
|
Outsider30
Newbie
Offline
Activity: 8
Merit: 0
|
|
January 22, 2018, 04:58:41 PM |
|
I could go even more on type 1000h each card but there are some errors in more then I prefer to stay on 970h with consumption about 800w
overtool 1240 910 memory 2060 910
Can you send me your bios? I have 2 rx570 pulse itx 4GB elpida |
|
|
|
|
|
heavyarms1912
|
|
January 22, 2018, 06:23:48 PM |
|
I could go even more on type 1000h each card but there are some errors in more then I prefer to stay on 970h with consumption about 800w
overtool 1240 910 memory 2060 910
800watts for this speed is very much, so you overclock hard to achive that speed... Yup. I have 8 x RX570 doing 7,620 H/s @ 800w from wall. Mix of 4 Elpidas + 4 Hynix. My Elpidas aren't optimized for XMR yet. I am working on it. Hynix can do 1000+ at 1250/2080 (850-887mV) |
|
|
|
|
|
UnclWish
|
|
January 22, 2018, 07:18:29 PM |
|
I could go even more on type 1000h each card but there are some errors in more then I prefer to stay on 970h with consumption about 800w
overtool 1240 910 memory 2060 910
800watts for this speed is very much, so you overclock hard to achive that speed... Yup. I have 8 x RX570 doing 7,620 H/s @ 800w from wall. Mix of 4 Elpidas + 4 Hynix. My Elpidas aren't optimized for XMR yet. I am working on it. Hynix can do 1000+ at 1250/2080 (850-887mV) Hynix 4Gb? AJR? |
|
|
|
|
|
Poll
