heavyarms1912
|
|
January 22, 2018, 10:14:31 PM |
|
I could go even more on type 1000h each card but there are some errors in more then I prefer to stay on 970h with consumption about 800w
overtool 1240 910 memory 2060 910
800watts for this speed is very much, so you overclock hard to achive that speed... Yup. I have 8 x RX570 doing 7,620 H/s @ 800w from wall. Mix of 4 Elpidas + 4 Hynix. My Elpidas aren't optimized for XMR yet. I am working on it. Hynix can do 1000+ at 1250/2080 (850-887mV) Hynix 4Gb? AJR? Yes AJRs.
|
|
|
|
UnclWish
|
|
January 22, 2018, 10:34:45 PM |
|
I could go even more on type 1000h each card but there are some errors in more then I prefer to stay on 970h with consumption about 800w
overtool 1240 910 memory 2060 910
800watts for this speed is very much, so you overclock hard to achive that speed... Yup. I have 8 x RX570 doing 7,620 H/s @ 800w from wall. Mix of 4 Elpidas + 4 Hynix. My Elpidas aren't optimized for XMR yet. I am working on it. Hynix can do 1000+ at 1250/2080 (850-887mV) Hynix 4Gb? AJR? Yes AJRs. Yes, as I thought... On 8Gb MJR Hynix it's practically impossible to reach 1 kH/s...
|
|
|
|
maverik77
Newbie
Offline
Activity: 31
Merit: 0
|
|
January 23, 2018, 12:04:56 AM |
|
new milestone with 570 pulse itx 4gb 1000h on cryptonight settings 1260 900 memory 2030 910 1000h stable for over 5 hours 75w average https://imgur.com/nhxIcwW
|
|
|
|
thin
|
|
January 23, 2018, 05:16:04 AM |
|
new milestone with 570 pulse itx 4gb 1000h on cryptonight settings 1260 900 memory 2030 910 1000h stable for over 5 hours 75w average congrats, your have quite good card! BTW, why GGS always shows half of the rate in the log (as visible on the bottom line image)?
|
|
|
|
treanski
Full Member
Offline
Activity: 364
Merit: 106
ONe Social Network.
|
|
January 23, 2018, 05:25:02 AM |
|
new milestone with 570 pulse itx 4gb 1000h on cryptonight settings 1260 900 memory 2030 910 1000h stable for over 5 hours 75w average get this with 1150mhz core then its a good strap
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
January 23, 2018, 08:09:44 AM |
|
Gateless Gate Sharp 1.2.6 alpha https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.2.6-alpha* Improved memory handling for GPU's. * Made overclocking features more reliable. The most important change in this version is that GGS now retains GPU's memory buffers across multiple runs for stability. Some of the older versions of GGS had this feature, and I had to reintroduce it as AMD drivers do not handle reallocations of memory buffers all that well. With this version, however, you can see the exact amounts of GPU memory used and reserved by GGS. You also have options either to release memory buffers manually or to restart the miner. This version should be very stable, but please do let me know if anything. Enjoy!
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
ayiphelmy
Copper Member
Full Member
Offline
Activity: 416
Merit: 105
|
|
January 23, 2018, 08:24:53 AM |
|
Gateless Gate Sharp 1.2.6 alpha https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.2.6-alpha* Improved memory handling for GPU's. * Made overclocking features more reliable. The most important change in this version is that GGS now retains GPU's memory buffers across multiple runs for stability. Some of the older versions of GGS had this feature, and I had to reintroduce it as AMD drivers do not handle reallocations of memory buffers all that well. With this version, however, you can see the exact amounts of GPU memory used and reserved by GGS. You also have options either to release memory buffers manually or to restart the miner. This version should be very stable, but please do let me know if anything. Enjoy! thx for the update!
|
|
|
|
zloy_hulk
Newbie
Offline
Activity: 40
Merit: 0
|
|
January 23, 2018, 08:42:03 AM |
|
Gateless Gate Sharp 1.2.6 alpha https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.2.6-alpha* Improved memory handling for GPU's. * Made overclocking features more reliable. The most important change in this version is that GGS now retains GPU's memory buffers across multiple runs for stability. Some of the older versions of GGS had this feature, and I had to reintroduce it as AMD drivers do not handle reallocations of memory buffers all that well. With this version, however, you can see the exact amounts of GPU memory used and reserved by GGS. You also have options either to release memory buffers manually or to restart the miner. This version should be very stable, but please do let me know if anything. Enjoy! Thank you! I hope it will really work stable even with my big rig! *** Miners, please, share your results at neoscrypt hashrate, want to compare. My results: RX 580 8GB 1270/2140 - 840 kh RX 580 4GB 1250/2080 - 810 kh RX 570 4GB 1270/1980 - 740 kh
|
|
|
|
rascabily
|
|
January 23, 2018, 09:20:40 AM |
|
Gateless Gate Sharp 1.2.6 alpha https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.2.6-alpha* Improved memory handling for GPU's. * Made overclocking features more reliable. The most important change in this version is that GGS now retains GPU's memory buffers across multiple runs for stability. Some of the older versions of GGS had this feature, and I had to reintroduce it as AMD drivers do not handle reallocations of memory buffers all that well. With this version, however, you can see the exact amounts of GPU memory used and reserved by GGS. You also have options either to release memory buffers manually or to restart the miner. This version should be very stable, but please do let me know if anything. Enjoy! http://prntscr.com/i4bl6uevery 3 minutes it stops and restarts
|
|
|
|
UnclWish
|
|
January 23, 2018, 09:31:21 AM Last edit: January 23, 2018, 09:58:43 AM by UnclWish |
|
Gateless Gate Sharp 1.2.6 alpha https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.2.6-alpha* Improved memory handling for GPU's. * Made overclocking features more reliable. The most important change in this version is that GGS now retains GPU's memory buffers across multiple runs for stability. Some of the older versions of GGS had this feature, and I had to reintroduce it as AMD drivers do not handle reallocations of memory buffers all that well. With this version, however, you can see the exact amounts of GPU memory used and reserved by GGS. You also have options either to release memory buffers manually or to restart the miner. This version should be very stable, but please do let me know if anything. Enjoy! Thanks for update! Lets see... System hangs and BSOD's on enabling OC/UC on Pitcairn is fixed? I'm allready scare to enable it )))) Colors of GPU's disappeared on dashboard...
|
|
|
|
BartoszN1990
Full Member
Offline
Activity: 218
Merit: 100
https://deeponion.org
|
|
January 23, 2018, 09:54:26 AM |
|
This software is same like nicehash ?? Anybody can explain i can put my exchange btc address ? I put nicehash adres and mining fiew days i make 10$ but no received this on my adres. Hiw i can withdrawal or male payment ??
|
|
|
|
maverik77
Newbie
Offline
Activity: 31
Merit: 0
|
|
January 23, 2018, 10:08:59 AM |
|
great miner ..... I create custom bios example with 1.2.6
sapphire RX 580 Nitro + 8GB ETH 30-32 MH / s, XMR 990-1100H / s Micron
Bios Sapphire Pulse ITX RX 570 4GB Elpida / Hynix ETH 29-31MH / s Elpida, ETH 28-29MH / s Hynix XMR 1000 H / s Elpida, XMR 990 H / s Hynix
all cards 560/570/580 with stable custom settings and low power if you are looking for send me pm
|
|
|
|
UnclWish
|
|
January 23, 2018, 10:25:37 AM |
|
great miner ..... I create custom bios example with 1.2.6
sapphire RX 580 Nitro + 8GB ETH 30-32 MH / s, XMR 990-1100H / s Micron
Bios Sapphire Pulse ITX RX 570 4GB Elpida / Hynix ETH 29-31MH / s Elpida, ETH 28-29MH / s Hynix XMR 1000 H / s Elpida, XMR 990 H / s Hynix
all cards 560/570/580 with stable custom settings and low power if you are looking for send me pm
Looking custom bios rom for 580 8Gb Hynix MJR memory.
|
|
|
|
zloy_hulk
Newbie
Offline
Activity: 40
Merit: 0
|
|
January 23, 2018, 11:53:14 AM |
|
About new version 1.2.6
Now the miner is not restarting every 15 mins in my case. The hashrate drop (after switching devfee) is smaller than before, but anyway exists (I see now average 8.5-9.5 Mh from starting 10.5). I've noticed some new trouble - the system is now freezing very much while mining (since a few hours of mining) - it's strange.
My settings are: neoscrypt - i=8, worksize=256
with default settings I have less hashrate at the beginning and more hasrate drop after devfee.
|
|
|
|
treanski
Full Member
Offline
Activity: 364
Merit: 106
ONe Social Network.
|
|
January 23, 2018, 12:40:51 PM |
|
yep noticed that to, miner is restarting very often...mostly within 15Minutes..restart needs around 5Minutes(what i can see in logfile last submitted hashrate ->restart)
|
|
|
|
thin
|
|
January 23, 2018, 01:15:26 PM |
|
yep noticed that to, miner is restarting very often...mostly within 15Minutes..restart needs around 5Minutes(what i can see in logfile last submitted hashrate ->restart)
Is it related to devfee? In general - I like claymore's strategy best, he is running dev fee once per hour. Less switches - more profit for everyone, both miner owner and miner dev.
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
January 23, 2018, 01:31:45 PM |
|
You mean the miner shuts itself down every 15 minutes? I got to fix that ASAP.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
icedevil
Member
Offline
Activity: 242
Merit: 10
|
|
January 23, 2018, 02:06:06 PM |
|
i have problem with the 4k resolution from 1.2 version
|
|
|
|
alexpta
Newbie
Offline
Activity: 4
Merit: 0
|
|
January 23, 2018, 03:45:09 PM |
|
Hi, I try to run custom pool for StoneCoin (NeoScrypt algo): host: stratum+tcp://pool.bsod.pw port 2031, username: my wallet password: x but the app not responding for sometime then quit and reopen, not responding and quit, again and again. I had to open task manager to end the process. Can you help?
|
|
|
|
UnclWish
|
|
January 23, 2018, 03:58:06 PM |
|
Hi, I try to run custom pool for StoneCoin (NeoScrypt algo): host: stratum+tcp://pool.bsod.pw port 2031, username: my wallet password: x but the app not responding for sometime then quit and reopen, not responding and quit, again and again. I had to open task manager to end the process. Can you help?
Just point in host field without stratum+tcp:// Write this way - pool.bsod.pw And will work fine.
|
|
|
|
|