fluxy12
Jr. Member
Offline
Activity: 145
Merit: 1
|
|
April 26, 2018, 07:13:47 AM |
|
Zawawa, forget about X17, Equihash etc. Focus on bringing a fast Lyra2z miner, please. There's lots of speed to be unlocked for AMD hardware and a gap you could fill. The Linux-only TDXminer is already a lot faster than SGminer, and a guy called Kerney666 claimed to have achieved even higher hashrates with smart use of GCN ASM (as opposed to OpenCL).
Bring that to life and you've got a winner on your hands.
100% Agree, this algo seems to be the next AMD overkill. The first dev who will have this working on W10 must see a bunch of miners come to him and i hope that it will be Zawawa because his miner is the best i have found ATM (all my mines are there on Monero : rx580 8gb armor : 850h/s 90W at wall).
|
|
|
|
Iamtutut
|
|
April 26, 2018, 11:22:26 AM |
|
What coins can you mine with Lyra2z ?
|
|
|
|
MinedTangerine
Jr. Member
Offline
Activity: 308
Merit: 4
|
|
April 26, 2018, 11:58:51 AM |
|
I vote for Lyra2z. Good coins are on that algo and it works really good an AMD cards.
|
SUQA - A new open source peer to peer digital currency (https://suqa.org/)
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
April 26, 2018, 01:14:58 PM |
|
Alright, the new version seems to be working fine now. I will release it today, I promise!
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
April 26, 2018, 02:19:53 PM |
|
Also, I figured out how to manage cheap USB watchdogs. Hopefully this would ease the pain of optimizations...
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
UnclWish
|
|
April 26, 2018, 03:41:43 PM |
|
I still cannot install the 1.3.5 on my PC. The program is neither in add or remove programs, cannot find an uninstall file in the folder. How to proceed?
You can download zipped archive of program not installer. Then just extract into any folder and run GGS.
|
|
|
|
ans76
Newbie
Offline
Activity: 11
Merit: 0
|
|
April 26, 2018, 04:17:55 PM Last edit: April 26, 2018, 04:57:20 PM by ans76 |
|
I apologize for an off topic, but as touched upon a subject WatchDOG, Board Made to himself of "Digispark Kickstarter Mini USB Development" ( https://www.electroschematics.com/12102/learn-to-use-attiny85-usb-mini-development-board/), Ebay 2$. Created a small code which tracks for activity of HDD LED, in case of long absence of a signal reboots system. In operation it is connected directly to "front panel connector" on matherboard, without use to a relay. USB using only for loading of a code.
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
April 26, 2018, 07:12:50 PM |
|
Actually, GGS is now compatible with the aforementioned USB watchdog. I got pretty lucky on this one...
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
April 26, 2018, 11:21:09 PM |
|
Most of the graphics cards I purchased arrived already, including Sapphire Nitro+ Vega 64. Got to finish up v1.3.6 soon...
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
aGeoM
Newbie
Offline
Activity: 43
Merit: 0
|
|
April 26, 2018, 11:37:32 PM |
|
Hi
Just finished testing 1.3.5 and I notice that the Default Pool MiningPoolHub on CryptonightV7 set me to Asia and some times to US and I live in Europe. Etash is fine, can you add a field to set location? ThanKs.
Be well
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
April 26, 2018, 11:40:11 PM |
|
Hi
Just finished testing 1.3.5 and I notice that the Default Pool MiningPoolHub on CryptonightV7 set me to Asia and some times to US and I live in Europe. Etash is fine, can you add a field to set location? ThanKs.
Be well
That's normal as GGS measures the response time of each server and picks the server with the least amount of response time.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
aGeoM
Newbie
Offline
Activity: 43
Merit: 0
|
|
April 27, 2018, 12:08:09 AM |
|
OK, thanks. Enjoy your new GPU's
|
|
|
|
fluxy12
Jr. Member
Offline
Activity: 145
Merit: 1
|
|
April 27, 2018, 06:21:46 AM |
|
Hi
Just finished testing 1.3.5 and I notice that the Default Pool MiningPoolHub on CryptonightV7 set me to Asia and some times to US and I live in Europe. Etash is fine, can you add a field to set location? ThanKs.
Be well
That's normal as GGS measures the response time of each server and picks the server with the least amount of response time. Any way to force the login to europe servers ? ping can be better in asia at one moment and very poor a few seconds later, creating a lot of stale shares.
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
April 27, 2018, 06:30:55 AM |
|
Hi
Just finished testing 1.3.5 and I notice that the Default Pool MiningPoolHub on CryptonightV7 set me to Asia and some times to US and I live in Europe. Etash is fine, can you add a field to set location? ThanKs.
Be well
That's normal as GGS measures the response time of each server and picks the server with the least amount of response time. Any way to force the login to europe servers ? ping can be better in asia at one moment and very poor a few seconds later, creating a lot of stale shares. OK, I will improve geolocation detection.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
fluxy12
Jr. Member
Offline
Activity: 145
Merit: 1
|
|
April 27, 2018, 06:33:25 AM |
|
Hi
Just finished testing 1.3.5 and I notice that the Default Pool MiningPoolHub on CryptonightV7 set me to Asia and some times to US and I live in Europe. Etash is fine, can you add a field to set location? ThanKs.
Be well
That's normal as GGS measures the response time of each server and picks the server with the least amount of response time. Any way to force the login to europe servers ? ping can be better in asia at one moment and very poor a few seconds later, creating a lot of stale shares. OK, I will improve geolocation detection. Thank you !
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
April 27, 2018, 12:56:41 PM |
|
Gateless Gate Sharp 1.3.6 alpha https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.3.6-alpha* Redesigned user interface for remote control with smaller screens. * Significantly improved responsiveness of user interface. * Added functionality to manage WDG273-based USB watchdog. (CH340 driver required.) * Improved default device settings for Ethash and RX 480 with Samsung GDDR5 (30Mh/s). * Added functionality to "capture" memory timings in the real-time. * Improved overclocking handling. * Added functionality to monitor ECC errors for Vega and other compatible devices. * Improved geolocation detection. * Switched the file format of user settings to JSON. Phew!
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
dragonmike
|
|
April 27, 2018, 01:03:59 PM |
|
Awesome! Now get cracking with a smoking fast Lyra2z miner!
|
|
|
|
Pete_X
Jr. Member
Offline
Activity: 47
Merit: 1
|
|
April 27, 2018, 02:38:26 PM Last edit: April 27, 2018, 02:54:16 PM by Pete_X |
|
Gateless Gate Sharp 1.3.6 alpha https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.3.6-alpha* Redesigned user interface for remote control with smaller screens. * Significantly improved responsiveness of user interface. * Added functionality to manage WDG273-based USB watchdog. (CH340 driver required.) * Improved default device settings for Ethash and RX 480 with Samsung GDDR5 (30Mh/s). * Added functionality to "capture" memory timings in the real-time. * Improved overclocking handling. * Added functionality to monitor ECC errors for Vega and other compatible devices. * Improved geolocation detection. * Switched the file format of user settings to JSON. Phew! Yay ! So far - so good. Just installed it on my testrig and it acts up a bit. CN Heavy: Miner restarts as soon as a 2nd 8GB card wants to start with two threads. Nothing in the logs - just a miner restart. Will dig a bit deeper l8r on when i have a bit more time. More details when i had time to fidel a bit with the miner
|
|
|
|
hamesh
Newbie
Offline
Activity: 22
Merit: 0
|
|
April 27, 2018, 03:26:42 PM |
|
Yay ! So far - so good. Just installed it on my testrig and it acts up a bit. CN Heavy: Miner restarts as soon as a 2nd 8GB card wants to start with two threads. Nothing in the logs - just a miner restart. Will dig a bit deeper l8r on when i have a bit more time. More details when i had time to fidel a bit with the miner Crap. I have the same issue. 2 R9 390x. First one starts up, but when second one starts when goes from 1.2GB memory to 2.4, application crashes
|
|
|
|
Iamtutut
|
|
April 27, 2018, 03:27:06 PM |
|
Actually, GGS is now compatible with the aforementioned USB watchdog. I got pretty lucky on this one...
Great news, how to purchase one "plug ang play" from you ? Delivery to France.
|
|
|
|
|