▂▃▅▆▇⫷[🆉🅿🅾🅾🅻.🅲🅰]⫸⫷[!Paying 10 FLUX PA's!]⫸⫷[ the miners multipool ]⫸▇▆▅▃▂

[guytechie]

No need to remove keccak.

Go to the Pools folder and edit the zpool.ps1 (and zpool24hr.ps1) file(s).

This works for NemosMiner and Sniffdogminer (and others based off the same script).

Find the line "switch($Zpool_Algorithm)" and add the line " "keccak"{$Divisor *= 1000} ".

See example:

Code:

switch($Zpool_Algorithm)
    {
        "equihash"{$Divisor /= 1000}
        "blake2s"{$Divisor *= 1000}
        "blakecoin"{$Divisor *= 1000}
        "decred"{$Divisor *= 1000}
        "keccak"{$Divisor *= 1000}
    }

No I took it off because that's not the algo's I have been watching lately

Also the stratum diff is out as well...but I'll keep on adding them to zpool's


        "equihash"{$Divisor /= 1000}
        "blake2s"{$Divisor *= 1000}
       "blakecoin"{$Divisor *= 1000}
        "decred"{$Divisor *= 1000}
       "x11"{$Divisor *= 100}
        "keccak"{$Divisor *= 1000}

Thanks!

Are you going to have a thread dedicated to your script?  Been using it for a few days and love it for the pool switching.  Any plans on adding cryptonight?

[robinlongstride]

Hello, I am interested in switching to zpool from miningpoolhub because zpool supports more coins.

It says in setup to set profitability factors in .bat file. How do I figure out the profitability factor for the rig I am using? I will be using a 1070, 1080, and 2 rx 480s for now.

Or is it fine to not set any factors in -p and leave it default?

Thanks for the help!

This post:

https://bitcointalk.org/index.php?topic=1751272.msg17921405#msg17921405

and this thread should be able to get you going:

https://bitcointalk.org/index.php?topic=1777336.msg17729122

How do I figure out the profitability factor for my Baikal ASIC? (X11,X13,X14,X15,Quark,Qubit)
https://ibb.co/dBu9VF

[Fromage]

No need to remove keccak.

Go to the Pools folder and edit the zpool.ps1 (and zpool24hr.ps1) file(s).

This works for NemosMiner and Sniffdogminer (and others based off the same script).

Find the line "switch($Zpool_Algorithm)" and add the line " "keccak"{$Divisor *= 1000} ".

See example:

Code:

switch($Zpool_Algorithm)
    {
        "equihash"{$Divisor /= 1000}
        "blake2s"{$Divisor *= 1000}
        "blakecoin"{$Divisor *= 1000}
        "decred"{$Divisor *= 1000}
        "keccak"{$Divisor *= 1000}
    }

No I took it off because that's not the algo's I have been watching lately

Also the stratum diff is out as well...but I'll keep on adding them to zpool's


        "equihash"{$Divisor /= 1000}
        "blake2s"{$Divisor *= 1000}
       "blakecoin"{$Divisor *= 1000}
        "decred"{$Divisor *= 1000}
       "x11"{$Divisor *= 100}
        "keccak"{$Divisor *= 1000}

Thanks!

Are you going to have a thread dedicated to your script?  Been using it for a few days and love it for the pool switching.  Any plans on adding cryptonight?

Yes just add it to your startsniffin.bat and increase the interval a bit (from 90)... only picks up Monroe

[guytechie]

Thanks!

Are you going to have a thread dedicated to your script?  Been using it for a few days and love it for the pool switching.  Any plans on adding cryptonight?

Yes just add it to your startsniffin.bat and increase the interval a bit (from 90)... only picks up Monroe

Thanks again.  Worked like a treat.  Any plans on creating a thread in bitcointalk for your Sniffindog script?

[Fromage]

Thanks!

Are you going to have a thread dedicated to your script?  Been using it for a few days and love it for the pool switching.  Any plans on adding cryptonight?

Yes just add it to your startsniffin.bat and increase the interval a bit (from 90)... only picks up Monroe

Thanks again.  Worked like a treat.  Any plans on creating a thread in bitcointalk for your Sniffindog script?

Perhaps if I get some help answering questions...

In the meantime you can find me under the issues tab at GitHub

[kaptkrunch]

Hi all!

Whats up with max coin??? No payout in over a day.

[Junkbarman]

https://imgur.com/DI4B4xD

Why in the world is that saying zero?

I don't have the biggest miners, but damn I just don't understand that. Using nemosminer auto switched to that coin and then to see that payout is just discouraging.

[Nekor]

Just curious but can you be paid out in ETH?

[kaptkrunch]

https://imgur.com/DI4B4xD

Why in the world is that saying zero?

I don't have the biggest miners, but damn I just don't understand that. Using nemosminer auto switched to that coin and then to see that payout is just discouraging.

Are you referring to Max Coin? I dunno ive had two rigs on it for over a day and no payouts at all, no pending, no unconfirmed, in fact my immature went to 23 sats which i run 12 gpus, so its never 23 sats.

Im hoping the pool had a issue and i get paid, but untill them that algo is currently disabled in my software.

[kaptkrunch]

Just curious but can you be paid out in ETH?

I do believe BTC is the only payout method, dont quote me on that. Unless you mine Max Coin then you get air for payment.

[Junkbarman]

https://imgur.com/DI4B4xD

Why in the world is that saying zero?

I don't have the biggest miners, but damn I just don't understand that. Using nemosminer auto switched to that coin and then to see that payout is just discouraging.

Are you referring to Max Coin? I dunno ive had two rigs on it for over a day and no payouts at all, no pending, no unconfirmed, in fact my immature went to 23 sats which i run 12 gpus, so its never 23 sats.

Im hoping the pool had a issue and i get paid, but untill them that algo is currently disabled in my software.

Not so sure about the Max Coin, I'm asking aobut Lithium, UMolecule, and BlakeBitcoin..they are all aux PoW and literally not paying anything. So why is that even being mined?

[starcrys]

Em....Can I just check if the last payout for Sunday has passed? 'Cos I checked and didn't really see a payout and so am wondering if the last payout hasn't happened yet (below's my balance).


Balance                      0.00152950 BTC
Total Unpaid ****      0.00153234 BTC

[kaptkrunch]

Em....Can I just check if the last payout for Sunday has passed? 'Cos I checked and didn't really see a payout and so am wondering if the last payout hasn't happened yet (below's my balance).


Balance                      0.00152950 BTC
Total Unpaid ****      0.00153234 BTC

i think minimum payout is .0024ish

[kaptkrunch]

https://imgur.com/DI4B4xD

Why in the world is that saying zero?

I don't have the biggest miners, but damn I just don't understand that. Using nemosminer auto switched to that coin and then to see that payout is just discouraging.

Are you referring to Max Coin? I dunno ive had two rigs on it for over a day and no payouts at all, no pending, no unconfirmed, in fact my immature went to 23 sats which i run 12 gpus, so its never 23 sats.

Im hoping the pool had a issue and i get paid, but untill them that algo is currently disabled in my software.

Not so sure about the Max Coin, I'm asking aobut Lithium, UMolecule, and BlakeBitcoin..they are all aux PoW and literally not paying anything. So why is that even being mined?

I see what your saying, mines been hitting mobilecash for crap payouts. Hmmmm

[Lercker]

Em....Can I just check if the last payout for Sunday has passed? 'Cos I checked and didn't really see a payout and so am wondering if the last payout hasn't happened yet (below's my balance).


Balance                      0.00152950 BTC
Total Unpaid ****      0.00153234 BTC

Min balance is 0.002 (was 0.0025 for a couple weeks) for "Sunday" payouts...which now can happen a few times a week so they may not happen on Sunday anymore.

[starcrys]

Em....Can I just check if the last payout for Sunday has passed? 'Cos I checked and didn't really see a payout and so am wondering if the last payout hasn't happened yet (below's my balance).


Balance                      0.00152950 BTC
Total Unpaid ****      0.00153234 BTC

Min balance is 0.002 (was 0.0025 for a couple weeks) for "Sunday" payouts...which now can happen a few times a week so they may not happen on Sunday anymore.

Em....Can I just check if the last payout for Sunday has passed? 'Cos I checked and didn't really see a payout and so am wondering if the last payout hasn't happened yet (below's my balance).


Balance                      0.00152950 BTC
Total Unpaid ****      0.00153234 BTC

i think minimum payout is .0024ish

Wow! Okay, 'cos I checked at the helpdesk and it gave a value of 0.0015...I guess the helpdesk wasn't updated then?

Thanks kaptkrunch. Thanks Lercker.

[sundownz]

Anything that says "auxPOW" is basically "free money" the way I saw it explained in the thread earlier... and some of the "blakecoin" ones do seem to have zero value.

[kaptkrunch]

Anything that says "auxPOW" is basically "free money" the way I saw it explained in the thread earlier... and some of the "blakecoin" ones do seem to have zero value.

Free money for who??? Sure as hell not the miner... My gear was hammering Max coin, immature .00000023 for 12 hrs hash, not exactly killin it.

[sundownz]

Anything that says "auxPOW" is basically "free money" the way I saw it explained in the thread earlier... and some of the "blakecoin" ones do seem to have zero value.

Free money for who??? Sure as hell not the miner... My gear was hammering Max coin, immature .00000023 for 12 hrs hash, not exactly killin it.

Yes, for the miner -- you can read more about it (Merged Mining):

https://eprint.iacr.org/2017/791.pdf

https://bitcoin.stackexchange.com/questions/273/how-does-merged-mining-work

Junkbarman was asking about the blakecoin algo (which has merged mining) -- so does Lyra2v2 (which you mentioned).

-----

Max Coin - keccak - does not have merged mining - so what I am saying about "auxPOW" does not apply.

[jkminkov]

m7m MAGi taken offline as it looks like they have some chain issues now.

can you set api to show 0 when you shutdown coins, otherwise algoswitch got stuck retrying to connect.