▂▃▅▆▇⫷[🆉🅿🅾🅾🅻.🅲🅰]⫸⫷[!Paying 10 FLUX PA's!]⫸⫷[ the miners multipool ]⫸▇▆▅▃▂

[Riptide_NVN]

I tried mining LUX yesterday on the pool however it popped up and gave me the message in red lettering about not being able to pay out in that currency.

Is this issue resolved?  It seems like it was a problem with XVG on and off last week too.

[crackfoo]

I apologize for not posing in the right place (I couldn't find it). I'm total newbie. Where do I report zpool coins not making it to my wallet?  For the last 2 days no coins have been arriving. On the wallet  page, it shows the txid's, and none appear in https://chainz.cryptoid.info/linx/ (that's what Coinomi Support says).  Below are the txid's. I can send screen shots if needed. I'd really appreciate knowing what's wrong with zpool and where all my coins went. They had to go somewhere. Please let me know how to proceed. Thanks.

about 3am, CST 1-24-18
http://zpool.ca/explorer/LINX?txid=bf2455649aeaec5a6c5371a1e0e1d6e1d2d63463627efe55da4bd5862f372c0f
about 11pm, CST 1-23-18
http://zpool.ca/explorer/LINX?txid=816092d16724e26e87ebb4afb86cb0973b3a6be343d11ac50435cf6d083f54f2
about 8pm CST, 1-23-18
http://zpool.ca/explorer/LINX?txid=a4923f735eae04785fa02c8eb26fd3f8a7856f284362c07e3d1e32504f93b292
about 4pm CST, 1-23-18
http://zpool.ca/explorer/LINX?txid=536b009638d636efdf5b8a6fe4bed1fd495c5f2e2df94d02c11146185dcf7c1f

sounds like LINX probably forked. I'll check into it later, but I'd stop mining using LINX address for now.

yup, looks like the dev updated the wallet. It's updated now. payouts should resume when it's synced.

[gpukoins]

at least you can see your empty wallets. all i see now is "Error 502 Bad gateway"
and nearly all coins were in status "New" for the last hour before that

[jagauthier]

at least you can see your empty wallets. all i see now is "Error 502 Bad gateway"
and nearly all coins were in status "New" for the last hour before that

The website and API are down.

[bobguy22]

So I've tried to connect and mine with both my electrum segwit bitcoin address and my electrum-ltc segwit litecoin address and they do not work any reason why?

[cryptapus]

Greetings!

A required update for Myriadcoin has been released:

https://www.reddit.com/r/myriadcoin/comments/7sp184/myriadcoin_01425/

Please update your pool at your earliest convenience.

[cornercafe]

Anybody has leveraged the API to get data from ZPOOL in a Google Sheet?

I tried but got lost in the proceed.    I believe though that should I have something to start with I could achieve what I want.

Thanks for your support...

I was able to get LibreOffice Calc to make an external data link to the WhatToMine.com website. It gives me real-time info without all the stupid flashing pop-ups and extra crap no one wants to see. It's rough going, since I'm not a VB programmer. I had to write some macros to fire when the sheet opens, closes, and updates the highest-paying coin.

[CrownRoyal79]

I use a BTC address to mine neoscrypt and everything has been working fine for several weeks. Today, I tried to setup a different rig to mine lyra2rev2 and I want to use a different BTC address so I can keep track of earnings.

Please somebody tell me why I have tried over 10+ BTC addresses and a few minutes after mining they all report as BCH !!?!?!? And yes I have the c=BTC set in the password field.

How the hell can I get zpool to recognize a valid BTC address? FWIW, these are all segwit addresses generated from my Trezor. Please help!!

[spielt_]

Is something wrong with yescrypt pool?
'Stratum connection failed' is been several hours already.

[HardBlockMiner]

I use a BTC address to mine neoscrypt and everything has been working fine for several weeks. Today, I tried to setup a different rig to mine lyra2rev2 and I want to use a different BTC address so I can keep track of earnings.

Please somebody tell me why I have tried over 10+ BTC addresses and a few minutes after mining they all report as BCH !!?!?!? And yes I have the c=BTC set in the password field.

How the hell can I get zpool to recognize a valid BTC address? FWIW, these are all segwit addresses generated from my Trezor. Please help!!

If you post the btc address Crack usually checks a few times a day and fixes it for people.

[Johosen]

I use a BTC address to mine neoscrypt and everything has been working fine for several weeks. Today, I tried to setup a different rig to mine lyra2rev2 and I want to use a different BTC address so I can keep track of earnings.

Please somebody tell me why I have tried over 10+ BTC addresses and a few minutes after mining they all report as BCH !!?!?!? And yes I have the c=BTC set in the password field.

How the hell can I get zpool to recognize a valid BTC address? FWIW, these are all segwit addresses generated from my Trezor. Please help!!

I have exactly the same problem. It is all shown as BCH despite the correct -p c=BTC ending in by bat file. Here is my BTC address in case someone can fix this: 1MvPAKp3HgotDnZhQYv99gWoTCVxBdFmpz

[PierG74]

Hi all, it's from today i'm working on this wallet ( iSEYT4b5LZiRjCiJgAEoQsbZDQ6gRdxsME) trying YesScript & 7n7 algo.
I have hase/rate & many exchange
https://screenshotscdn.firefoxusercontent.com/images/cdf92469-f401-4990-b38b-fae89131279b.png?download=Screenshot-2018-1-25%200%2001244788%20INN%20-%20zpool.png&sig=1ds-csbDN0M9SUNnxFF7QxNPKFM

But no one profit on my balance.

Can anyone explain me witch problem can i have pls?

since yesterday all works good.

Thankyou

[crackfoo]

I use a BTC address to mine neoscrypt and everything has been working fine for several weeks. Today, I tried to setup a different rig to mine lyra2rev2 and I want to use a different BTC address so I can keep track of earnings.

Please somebody tell me why I have tried over 10+ BTC addresses and a few minutes after mining they all report as BCH !!?!?!? And yes I have the c=BTC set in the password field.

How the hell can I get zpool to recognize a valid BTC address? FWIW, these are all segwit addresses generated from my Trezor. Please help!!

I have exactly the same problem. It is all shown as BCH despite the correct -p c=BTC ending in by bat file. Here is my BTC address in case someone can fix this: 1MvPAKp3HgotDnZhQYv99gWoTCVxBdFmpz

fixed and fixed.

[lost.dark]

is ltc payment safe? And whats the payment threshold for ltc?

[crackfoo]

is ltc payment safe? And whats the payment threshold for ltc?

yes, same as the rest. it described on the main page.

[SpriterQC]

Anybody has leveraged the API to get data from ZPOOL in a Google Sheet?

I tried but got lost in the proceed.    I believe though that should I have something to start with I could achieve what I want.

Thanks for your support...

I was able to get LibreOffice Calc to make an external data link to the WhatToMine.com website. It gives me real-time info without all the stupid flashing pop-ups and extra crap no one wants to see. It's rough going, since I'm not a VB programmer. I had to write some macros to fire when the sheet opens, closes, and updates the highest-paying coin.

So this is working in Excel then?  Can I have a look at it?  Maybe I can leverage this for me and the community.

[logon109]

I have an issue and hoping someone can help. I haven't been getting any new deposits from zPool in the past two days. Last transaction was 1/23/18 around 22:00. I'm mining lyra2v2 and i'm using verge QT wallet.  I've also updated the blockchain but still no luck. On zPool, it says it's paid out but it's not in my wallet. What gives? Any help would be appreciated.

Thank you in advance!

[crackfoo]

I have an issue and hoping someone can help. I haven't been getting any new deposits from zPool in the past two days. Last transaction was 1/23/18 around 22:00. I'm mining lyra2v2 and i'm using verge QT wallet.  I've also updated the blockchain but still no luck. On zPool, it says it's paid out but it's not in my wallet. What gives? Any help would be appreciated.

Thank you in advance!

check their blockexplorer for the transaction ID the pool gave you.

https://verge-blockchain.info/

[minerbit77]

Hi, I am mining HSR right now with ccminer, but on the wallet page I see that I am getting paid with HBC (HomeBlock Coin) that is totally unusable and I don't even got such wallet, why is this happening?

[cornercafe]

I apologize for not posing in the right place (I couldn't find it). I'm total newbie. Where do I report zpool coins not making it to my wallet?  For the last 2 days no coins have been arriving. On the wallet  page, it shows the txid's, and none appear in https://chainz.cryptoid.info/linx/ (that's what Coinomi Support says).  Below are the txid's. I can send screen shots if needed. I'd really appreciate knowing what's wrong with zpool and where all my coins went. They had to go somewhere. Please let me know how to proceed. Thanks.

about 3am, CST 1-24-18
http://zpool.ca/explorer/LINX?txid=bf2455649aeaec5a6c5371a1e0e1d6e1d2d63463627efe55da4bd5862f372c0f
about 11pm, CST 1-23-18
http://zpool.ca/explorer/LINX?txid=816092d16724e26e87ebb4afb86cb0973b3a6be343d11ac50435cf6d083f54f2
about 8pm CST, 1-23-18
http://zpool.ca/explorer/LINX?txid=a4923f735eae04785fa02c8eb26fd3f8a7856f284362c07e3d1e32504f93b292
about 4pm CST, 1-23-18
http://zpool.ca/explorer/LINX?txid=536b009638d636efdf5b8a6fe4bed1fd495c5f2e2df94d02c11146185dcf7c1f

sounds like LINX probably forked. I'll check into it later, but I'd stop mining using LINX address for now.

yup, looks like the dev updated the wallet. It's updated now. payouts should resume when it's synced.

I checked again today and those 28+ coins have never reached my Coinomi wallet.