▂▃▅▆▇⫷[🆉🅿🅾🅾🅻.🅲🅰]⫸⫷[!Paying 10 FLUX PA's!]⫸⫷[ the miners multipool ]⫸▇▆▅▃▂

[JaredKaragen]

Hello, why is the website buggy last days.Are there some known server problems?
I get from time to time Errro 502 and after refresh should I click on "Refresh for the live version" ant the third page loading is ok.

The second problem--> when I want to check the transaction hash, I get this errror ->Internal Server Error Call to undefined function curl_init()

Solved:
A third I didnt received the coins from this transaction txid=34e8720aca62f6ba56cac8bcdace186ba24db27ef386bd96b6f33b8835f03321
I#m mining X11 Algo(XMCC).

Thanks in advance!

the frontend goes offline when the transactions/payments are being processed;  or if some maintenance is going on.

normally comes back up in a little bit.

[Strebba90]

hi, i'm trying to mine on zpool with my BTC address, just created with greenaddress.
miner works fine but the pool show BCH balance. 
anyone can explain me why?

[Crywolf417]

When is MKT coins paid ? All other coins is paid except this one

mXxxDgi6jj6xVgR28SYHF3xNC6dd7a8kXS

Thanks

[JaredKaragen]

hi, i'm trying to mine on zpool with my BTC address, just created with greenaddress.
miner works fine but the pool show BCH balance. 
anyone can explain me why?

It needs to be repaired;  sometimes the server picks the wrong one for an unknown reason.

go to zpool.ca mainsite, scroll to bottom, click support link.   go to #support in the discord channel, and type a message to zpool that you need your account address from BCH switched to BTC.  Be sure to include your wallet address with your comment, and it will be handled when zpool gets back online.

[digital$]

miner stats for scrypt, sha256 and x11 almost always indicate lower hashrate than what im giving.  in some cases, especially with scrypt and sha miner shows its connected but absolutely no hashrate??  couple min later and it shows a quarter of what the actual hash is.  pity, wanted to give this pool a go but what gives if you cant track your hashrate reliably via the site.   

[rockmoney]

I see many people have started using Zpool to mine the blake2s algorithm using Claymore's new Dual Miner v11.3. The miner will allow you to mine Ethereum and now blake2s or keccak at the same time (with no effect on Ethereum mining speeds). Since its release yesterday, more and more people have started mining blake2s at Zpool.

Using my NVIDIA GTX 1070 rigs, I get about the same speed for each algorithm. To that end, you would think miners would then mine the most profitable one on a multipool like Zpool. For some reason, that is NOT the current case. For this example, we will use 10 GH/s as my mining speed for both algorithms, and current 24 hour average profitability for each algo are as follows:

keccak: 0.00004407 BTC/GH/day
blake2s: 0.00002123 BTC/GH/day

After 24 hours of mining at 10 GH/s, mining revenue (using the same exact miner) would be as follows:

keccak: 0.0105768 BTC/day
blake2s: 0.0050952 BTC/day

For that reason, I simply can NOT believe there are currently 9 people using Claymore's Miner (displayed as "dual" in the Miner stats on Zpool) to mine using the keccak algo, and 3,015 people using the same miner to mine the blake2s algo. According to the info provided by Zpool, mining profits using the keccak algorithm are nearly DOUBLE compared to blake2s. So, WHY ARE SO MANY CHOOSING TO EARN NEARLY HALF OF WHAT THEY COULD BE EARNING USING THE SAME MINER? Seriously, is there something I'm missing here?

If more miners decide to double their profits simply by changing two words and four numbers of the command line used to start the miner, the pool would likely find more keccak blocks, resulting in even more than double profits over the blake2s algorithm. Anyway, (unless I am completely missing something) I am still shocked that over 3k miners would start mining something without first checking profitability. The only reason I can really justify mining something less profitable is if you are a believer/supporter of the project, but payouts can be made in any currency mined on Zpool, so that should not be the case here..

I am getting way too many rejected shares when mining the keccak algo, but changing the difficulty manually has helped a great deal (although I am still seeing more rejected shares than I would like, and compared to any other algo on Claymore). Can someone from Zpool please look into the abnormally high number of rejected shares on port 5133?

[rockmoney]

hi, i'm trying to mine on zpool with my BTC address, just created with greenaddress.
miner works fine but the pool show BCH balance.  
anyone can explain me why?

It needs to be repaired;  sometimes the server picks the wrong one for an unknown reason.

go to zpool.ca mainsite, scroll to bottom, click support link.   go to #support in the discord channel, and type a message to zpool that you need your account address from BCH switched to BTC.  Be sure to include your wallet address with your comment, and it will be handled when zpool gets back online.

This from https://www.zpool.ca/ landing page:

<WALLET_ADDRESS> must be a valid address. Incorrect addresses will result in forfit of earning.

You can also use any valid wallet address from any of the coins we mine. This feature has had minimal testing so use at your own risk

YOU MUST ALWAYS set your currency in your password field that matches your wallet address: c=<SYMBOL>. The pool has mined hundreds of different coins and many have the same address version. We CAN NOT read your mind and possible know what currency you want. If no c=<SYMBOL> is set, your currency will be randomly chosen from any matching coins we have used. This HAS TO BE A REAL EXCHANGE SYMBOL. Do not use a symbol that has an <ALGO> added. Such as XVG-blake2s or AUR-sha or DGB-skein, these are ALL WRONG. These are used only for the pool to support multi-algo coins.

c=<SYMBOL> doesn't always work. However, if you fail to correct this and/or continue mining with the wrong currency detected you will NOT be able to change to the proper currency once an actual balance has been posted to the address. The quickest and easiest way for you to fix this, is create a new address, update your miners and make sure again you've set c= properly. Do not log a support ticket asking to convert your balance from one currency to another, they'll be closed. If you insist on keeping and using the original address. Your accrued balance will be cleared and the proper currency updated for you. Any blocks still new/immature/exchange will automaticlly convert to the new currency

[JaredKaragen]

I see many people have started using Zpool to mine the blake2s algorithm using Claymore's new Dual Miner v11.3. The miner will allow you to mine Ethereum and now blake2s or keccak at the same time (with no effect on Ethereum mining speeds). Since its release yesterday, more and more people have started mining blake2s at Zpool.

Using my NVIDIA GTX 1070 rigs, I get about the same speed for each algorithm. To that end, you would think miners would then mine the most profitable one on a multipool like Zpool. For some reason, that is NOT the current case. For this example, we will use 10 GH/s as my mining speed for both algorithms, and current 24 hour average profitability for each algo are as follows:

keccak: 0.00004407 BTC/GH/day
blake2s: 0.00002123 BTC/GH/day

After 24 hours of mining at 10 GH/s, mining revenue (using the same exact miner) would be as follows:

keccak: 0.0105768 BTC/day
blake2s: 0.0050952 BTC/day

For that reason, I simply can NOT believe there are currently 9 people using Claymore's Miner (displayed as "dual" in the Miner stats on Zpool) to mine using the keccak algo, and 3,015 people using the same miner to mine the blake2s algo. According to the info provided by Zpool, mining profits using the keccak algorithm are nearly DOUBLE compared to blake2s. So, WHY ARE SO MANY CHOOSING TO EARN NEARLY HALF OF WHAT THEY COULD BE EARNING USING THE SAME MINER? Seriously, is there something I'm missing here?

If more miners decide to double their profits simply by changing two words and four numbers of the command line used to start the miner, the pool would likely find more keccak blocks, resulting in even more than double profits over the blake2s algorithm. Anyway, (unless I am completely missing something) I am still shocked that over 3k miners would start mining something without first checking profitability. The only reason I can really justify mining something less profitable is if you are a believer/supporter of the project, but payouts can be made in any currency mined on Zpool, so that should not be the case here..

I am getting way too many rejected shares when mining the keccak algo, but changing the difficulty manually has helped a great deal (although I am still seeing more rejected shares than I would like, and compared to any other algo on Claymore). Can someone from Zpool please look into the abnormally high number of rejected shares on port 5133?

remember;  that's a dual-use miner;  AMD or nvidia.  Profitability on the other algos is vastly different between them.... you have no idea what they are mining with... thus no clue which is more profitable.    You only know for your own case.

I put a note about the rejects in the #support page of the zpool discord for you.

[malthrax]

I am still shocked that over 3k miners would start mining something without first checking profitability.

I'm not.  Not at all.

[Selector79]

Hello.

Is it possible in the settings to disable only one coin of algorithm?

In a Qubit algorithm I would disable a qubitcoin.  It takes only miner capacity and do not earn something.

Are there some commands for Baikal Giant X10 to disable this coin, but mine other coins in an algorithm?

Thanks in advance




Is it possible to disable qubitcoin in your pool or settings on baikal x10?

[JaredKaragen]

Hello.

Is it possible in the settings to disable only one coin of algorithm?

In a Qubit algorithm I would disable a qubitcoin.  It takes only miner capacity and do not earn something.

Are there some commands for Baikal Giant X10 to disable this coin, but mine other coins in an algorithm?

Thanks in advance




Is it possible to disable qubitcoin in your pool or settings on baikal x10?

no, this is not how the pool works.  you only pick the algo.

[Selector79]

Hello.

Is it possible in the settings to disable only one coin of algorithm?

In a Qubit algorithm I would disable a qubitcoin.  It takes only miner capacity and do not earn something.

Are there some commands for Baikal Giant X10 to disable this coin, but mine other coins in an algorithm?

Thanks in advance




Is it possible to disable qubitcoin in your pool or settings on baikal x10?

no, this is not how the pool works.  you only pick the algo.

Is it possible for you as pool to disable this coin?    This coin do not earn money!   It is only wasting of capacity!

[JaredKaragen]

Is it possible for you as pool to disable this coin?    This coin do not earn money!   It is only wasting of capacity!

you would need to speak in #support on the discord channel and voice your concern.  see this or the previous page for a reply of mine with instructions to get to the discord page.  if its an auxpow coin;  it will not be removed as its free hash results that would just get discarded otherwise.

[Crywolf417]

When is MKT coins paid ? All other coins is paid except this one

mXxxDgi6jj6xVgR28SYHF3xNC6dd7a8kXS

Thanks

Why is my coins not paid , 2 days and still no payment ?

[JaredKaragen]

When is MKT coins paid ? All other coins is paid except this one

mXxxDgi6jj6xVgR28SYHF3xNC6dd7a8kXS

Thanks

Why is my coins not paid , 2 days and still no payment ?

3 hours ago, tx: e0ddadbd98b3194a6580d4d5efb0136deca9048bc5daf7bb48d3247dc0f1ecef

[gaabit]

Hi'

i have Antminer L3+ and want to mine the most profit Coin and get paid in BTC coin

what is the settings ?

thank you

[JaredKaragen]

Hi'

i have Antminer L3+ and want to mine the most profit Coin and get paid in BTC coin

what is the settings ?

thank you

an L3 mines a specific algorythm.  just point it at that port to zpool using a btc address, as well as the correct password c=BTC
you don't pick the coin, the stratum picks the coin.

[gaabit]

Hi'

i have Antminer L3+ and want to mine the most profit Coin and get paid in BTC coin

what is the settings ?

thank you

an L3 mines a specific algorythm.  just point it at that port to zpool using a btc address, as well as the correct password c=BTC
you don't pick the coin, the stratum picks the coin.

thank you'

But, it will picks the most profit coin ?

[crackfoo]

Hi'

i have Antminer L3+ and want to mine the most profit Coin and get paid in BTC coin

what is the settings ?

thank you

an L3 mines a specific algorythm.  just point it at that port to zpool using a btc address, as well as the correct password c=BTC
you don't pick the coin, the stratum picks the coin.

thank you'

But, it will picks the most profit coin ?

yes

[Blazer77]

hello,

mining TerraCoin with everything working until it didn't.  Tx changed to "...." which i understand to be resubmitted.  What is the timeline?  It has been about 2 weeks, I tried mining again with every Tx still going "...."   

Wallet:
 1HS388JFrjHxnQvDMtnCxzQMFxqXQLtAev
  1H5tVU9mwgL5D4cHZBnzqLsKzDAe8oVqx8
   1PQEATwoMy46taXYMum8eCKZ6hz8YoWE61

thank you!