[NemosMiner] multi algo profit switching NVIDIA/CPU miner

[minerx117]

NemosMiner-v3.0-windows

https://github.com/nemosminer/NemosMiner-v3.0-windows/archive/master.zip

NemosMiner-v3.0
Updated 2018 Mar 15

NemosMiner-v3.0 Monitors mining pools in real-time in order to find the most profitable Algo / Auto Benchmarks Each algo to get optimal speeds / Fully automated / Auto Downloads Miners / GUI

New to v3.0

GUI

  NemosMiner has a GUI making it easy to configure and run.
  Relies on config files. No need to edit bat files. Simply run NemosMiner With ConfigFile.bat (Not the .ps1)
  Set the config on the config tab, save, close, run

instructions:

Run NemosMiner With ConfigFile.bat (Not the .ps1)

1.Hit the Config tab

2.Set your config carefully

3.Select your pools and hit load defaults button. (Remove any algos you do not want to mine)

4.Close and run NemosMiner so it loads your changes properly

5.Hit "Start" if Autostart not selected.

6.there is a 5 minutes per day fee (0.3%), that can be changed in the config (Minimum is 1 - 0 is Random 0 to 5).

If you have Windows 7, 8, or 8.1, please update PowerShell: https://www.microsoft.com/en-us/download/details.aspx?id=50395

CCMiner may need 'MSVCR120.dll' if you don't already have it: https://www.microsoft.com/en-gb/download/details.aspx?id=40784

CCMiner may need 'VCRUNTIME140.DLL' if you don't already have it: https://www.microsoft.com/en-us/download/details.aspx?id=48145

running multiple cards its recommended to increase Virtual Memory 64gb is optimal

Requires nvidia driver newer than 388

Made For & Tested with 6x10603gb 6x1070 6x1070ti 6x1080ti (users have reported up to 12cards working have not tested myself) Some miners do not support more that 9 cards

ActiveMinerGainPct (percent of advantage that active miner has over candidates in term of profit (default 3%)

Pools variants:

24hr - uses last 24hour Actual API too request profit -Low switching rate
plus - uses advanced calculations to maximize profit -Best switching rate
normal - uses current estimate API too request profit -High switching rate
this is a free project feel free to donate be much appreciated:

aaronsace = 1MsrCoAt8qM53HUMsUxvy9gMj3QVbHLazH

nemo = 1QGADhdMRpp9Pk5u5zG1TrHKRrdK5R81TE

MrPlus = 134bw4oTorEJUUVFhokDQDfNqTs7rBMNYy

Licensed under the GNU General Public License v3.0 Permissions of this strong copyleft license are conditioned on making available complete source code of licensed works and modifications, which include larger works using a licensed work, under the same license. Copyright and license notices must be preserved. Contributors provide an express grant of patent rights
https://github.com/nemosminer/NemosMiner-v3.0-windows/blob/master/LICENSE

Best Regards
Nemo

[1714732620]

1714732620

[1714732620]

1714732620

[minerx117]

I'm using NemosMiner 2.5.2 with 4 GTX 1050ti cards. All mining software work well, except for the sick, buggy-as-hell hsrminer... It just brought me persistent headache while crashing all the time and needs infinite attempts for configuring it at a stable manner... Feels like the lousy kid in the family!

Please, get rid of it and use a well-configured edition of ccminer for Neoscrypt along with PhoenixMiner for ethereum mining...

Keep up the good work!

This would be a nice feature request.. able to select or change which miner is tied to an algo.  I would rather have stable miners.  Sometimes the fastest aren't stable.

NemosMiner is configured for GTX 10603gb to GTX 1080ti i already have "well-configured edition of ccminer for Neoscrypt"  "CcminerKlaust v8.21"...

open miners folder
edit CcminerKlaust.ps1
remove # from neoscrypt
save

eg,

Code:

. .\Include.ps1

$Path = ".\Bin\NVIDIA-CcminerKlaust\ccminer.exe"
$Uri = "https://github.com/KlausT/ccminer/releases/download/8.20/ccminer-820-cuda91-x64.zip"

$Commands = [PSCustomObject]@{
    #"bitcore" = "" #Bitcore
    #"blake2s" = "" #Blake2s
    #"blakecoin" = "" #Blakecoin
    #"vanilla" = "" #BlakeVanilla
    #"cryptonight" = "" #Cryptonight
    #"decred" = "" #Decred
    #"equihash" = "" #Equihash
    #"ethash" = "" #Ethash
    #"groestl" = " -d $SelGPUCC" #Groestl
    #"hmq1725" = "" #hmq1725
    #"keccak" = "" #Keccak
    #"lbry" = "" #Lbry
    #"lyra2v2" = " -d $SelGPUCC" #Lyra2RE2
    #"lyra2z" = "" #Lyra2z
    #"myr-gr" = " -d $SelGPUCC" #MyriadGroestl
    "neoscrypt" = " -b 4068 -d $SelGPUCC" #NeoScrypt
    #"nist5" = " -d $SelGPUCC" #Nist5
    #"pascal" = "" #Pascal
    #"qubit" = "" #Qubit
    #"scrypt" = "" #Scrypt
    #"sia" = "" #Sia
    #"sib" = "" #Sib
    #"skein" = "" #Skein
    #"timetravel" = "" #Timetravel
    #"x11" = "" #X11
    #"veltor" = "" #Veltor
    #"x11evo" = "" #X11evo
    #"x17" = "" #X17
    #"yescrypt" = "" #Yescrypt
}

 


PhoenixMiner for ethereum mining...  i'll get onto that asap  (also i will be reviewing ccminers over next few days, may be changes to a few algos to favor faster loading of gpus as more rigs are moving from 6 gpu's to 8 10 or 12 gpus it is becoming more of a issue...)

most of my rigs are still 6x GPUS i have a couple of 8x GPUS's...  (i use plus or 24hr & ActiveMinerGain 11 so my rigs only switch a few times a day..)

Best Regards
Nemo

[vitlab]

@minerx117

installed 3.0.
Please make possible, edit PaymentThreshhold. For the AHP it is not equal to 0.01 and 0.008

[minerx117]

thanks i'll update ahashpool to 0.008

[vitlab]

thanks i'll update ahashpool to 0.008

Thank you. how can I do this myself? now.

[JCS-CCT]

PhoenixMiner for ethereum mining...  i'll get onto that asap  (also i will be reviewing ccminers over next few days, may be changes to a few algos to favor faster loading of gpus as more rigs are moving from 6 gpu's to 8 10 or 12 gpus it is becoming more of a issue...)

most of my rigs are still 6x GPUS i have a couple of 8x GPUS's...  (i use plus or 24hr & ActiveMinerGain 11 so my rigs only switch a few times a day..)

Best Regards
Nemo

Thank you!  Looking forward to the updated miners.

[MaxiMan]

Looking Last version 3.0 with Gui...Thats good advance even when im familiarized with bats and codes
Few Questions:
What if i Select many pools at time? Looks like I can check everything... Will it change pools if one down (Like ASIC)?
Since it have GPU count... will it automatically adjust Hashrates depending of number of active GPUs for? I explained this few post above
(Im keeping 2 Copies  of Nemosminer to avoid Stats changed when using one or more GPUs)

[legendary13]

How to lower cpu utilization ?

[Raziel666]

Any way we can create automatic batch files for version 3? In case we want to add it to automatic startup if machine crashes or restarts, etc.

[MrPlus]

Any way we can create automatic batch files for version 3? In case we want to add it to automatic startup if machine crashes or restarts, etc.

See here : https://bitcointalk.org/index.php?topic=2965976.msg32004304#msg32004304

[legendary13]

eth-claymore use all gpu instead of listed in config

[Raziel666]

Any way we can create automatic batch files for version 3? In case we want to add it to automatic startup if machine crashes or restarts, etc.

See here : https://bitcointalk.org/index.php?topic=2965976.msg32004304#msg32004304

You have this:

Code:

C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -version 5.0 -executionpolicy bypass -windowstyle hidden -file ".\NPlusMiner-v2.0.ps1"

I see that in the version 3 batch file, it's the same with the addition of -ConfigFile switch. If we don't use the switch for our own batch files, where it's gonna get the configuration from? Or should we use the configuration options from version 2.5.2 batch files?

[MrPlus]

Any way we can create automatic batch files for version 3? In case we want to add it to automatic startup if machine crashes or restarts, etc.

See here : https://bitcointalk.org/index.php?topic=2965976.msg32004304#msg32004304

You have this:

Code:

C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -version 5.0 -executionpolicy bypass -windowstyle hidden -file ".\NPlusMiner-v2.0.ps1"

I see that in the version 3 batch file, it's the same with the addition of -ConfigFile switch. If we don't use the switch for our own batch files, where it's gonna get the configuration from? Or should we use the configuration options from version 2.5.2 batch files?

See changelog of NPlusMiner -ConfigFile was introduced in 2.0.3 (current is 2.1)
https://github.com/MrPlusGH/NPlusMiner/releases

-ConfigFile is optional, it defaults to ".\Config\config.json"

[Raziel666]

Any way we can create automatic batch files for version 3? In case we want to add it to automatic startup if machine crashes or restarts, etc.

See here : https://bitcointalk.org/index.php?topic=2965976.msg32004304#msg32004304

You have this:

Code:

C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -version 5.0 -executionpolicy bypass -windowstyle hidden -file ".\NPlusMiner-v2.0.ps1"

I see that in the version 3 batch file, it's the same with the addition of -ConfigFile switch. If we don't use the switch for our own batch files, where it's gonna get the configuration from? Or should we use the configuration options from version 2.5.2 batch files?

See changelog of NPlusMiner -ConfigFile was introduced in 2.0.3 (current is 2.1)
https://github.com/MrPlusGH/NPlusMiner/releases

-ConfigFile is optional, it defaults to ".\Config\config.json"

I tried using the following command in a batch file:

Code:

C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -version 5.0 -executionpolicy bypass -windowstyle hidden -file ".\NemosMiner-v3.0.ps1

But all it does is open the GUI, it doesn't start any miner. What am I doing wrong?

[MrPlus]

Any way we can create automatic batch files for version 3? In case we want to add it to automatic startup if machine crashes or restarts, etc.

See here : https://bitcointalk.org/index.php?topic=2965976.msg32004304#msg32004304

You have this:

Code:

C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -version 5.0 -executionpolicy bypass -windowstyle hidden -file ".\NPlusMiner-v2.0.ps1"

I see that in the version 3 batch file, it's the same with the addition of -ConfigFile switch. If we don't use the switch for our own batch files, where it's gonna get the configuration from? Or should we use the configuration options from version 2.5.2 batch files?

See changelog of NPlusMiner -ConfigFile was introduced in 2.0.3 (current is 2.1)
https://github.com/MrPlusGH/NPlusMiner/releases

-ConfigFile is optional, it defaults to ".\Config\config.json"

I tried using the following command in a batch file:

Code:

C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -version 5.0 -executionpolicy bypass -windowstyle hidden -file ".\NemosMiner-v3.0.ps1

But all it does is open the GUI, it doesn't start any miner. What am I doing wrong?

Check Autostart in config, Save Config, run

[Raziel666]

Check Autostart in config, Save Config, run

Thanks, seems to be working now.

Is this version hiding the miner windows or is it my idea? I get a message in the command windows "Staring miner" but no miner appears.

[MrPlus]

Check Autostart in config, Save Config, run

Thanks, seems to be working now.

Is this version hiding the miner windows or is it my idea? I get a message in the command windows "Staring miner" but no miner appears.

You should see the miner in the taskbar, they start minimized.

[vitlab]

who compared MHP (miningpoolhub.com) and AHP (www.ahashpool.com)?

[MrPlus]

#Set process priority to BelowNormal to avoid hash rate drops on systems with weak CPUs
(Get-Process -Id $PID).PriorityClass = "BelowNormal"

Edit: Looks like fixed in v3.0!

Yes. This has been fixed in NPlusMiner 2.1 and therefore in NemosMiner 3.0

[Stellvia]

Hi,

v3 ===> currency EUR , or EURO, or EU doesn't work ( still USD )

any idea ?