AMD FTW
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 317
Merit: 250
GET IN - Smart Ticket Protocol - Live in market!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 27, 2013, 08:11:46 PM |
|
Just got my boards from UPS. There was a $130 and some change brokerage fee I had to pay, but I don't really care as I have my boards and I can make that up pretty quickly. Time to get these parts on my table with my anti static mat and wrist band and start assembly as well as checking the firmware on these. I already missed my environmental science class this afternoon but physics will also be blown off tonight. I think I'll be running these together off of my alienware m11x laptop for the short term, but I'll need to look into the raspberry pi eventually once it's all up and running. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fanonymouse.org%2Fcgi-bin%2Fanon-www.cgi%2Fhttp%3A%2F%2Fanonymouse.org%2Fcgi-bin%2Fanon-www.cgi%2Fhttp%3A%2F%2Fimg32.imageshack.us%2Fimg32%2F2961%2Fgpvm.jpg&t=665&c=kROUpQFeqUlNDQ) SEXY! congrats + good luck. Well, I'm half way through unwrapping them and there's definitely some damage from shipping. Few pieces ripped off the boards, and tons of bent pins which I should be able to bend back. I will take pictures once I'm finished unwrapping them. I'm good with a solder gun, only problem is so far one board looks like part of the copper trace was pulled up from the board. I'll post pic in a bit. I think somewhere during shipment my box had some airtime http://www.youtube.com/watch?v=tPzRPga6uDg
|
|
|
|
roy7
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 27, 2013, 08:32:09 PM |
|
Hah nice video. Now we know where all the Avalon chips are. Sitting on some runaway. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
AMD FTW
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 317
Merit: 250
GET IN - Smart Ticket Protocol - Live in market!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2013, 02:31:43 AM Last edit: August 28, 2013, 02:56:17 PM by AMD FTW |
|
Here's pics of all the damaged boards. It's pretty obvious the box was thrown around and even though it was intact you could tell the box wasn't nice and rigid. I'm pretty sure even though the boards were taped together and packaged in bubble wrap the adjacent boards heatsink would hit the capacitor/other components and did all the damage. I think one way around this is to either have all the boards in tiny individual boxes which would cost more to ship and up the cost. Another idea is to have the end consumer install the heatsinks themselves and tape all the boards together and put them in one box and all the heatsinks in another box. Then combine these 2 boxes in 1 bigger box to ship it. I'm sure on small orders the boards will arrive in much better condition because of the package being lighter. Burnin I'm pretty sure I can fix most of these boards. I'm sure Mouser electronics would carry the parts and I get parts from them quickly as I've ordered parts in the past from them. I just need a bit of help finding the parts if you don't mind. http://www.mouser.com/Most boards have broken part 1(choke coil?). Its a through hole so I can solder that no problem One board has cracked part 2 (haven't powered it on yet, I may later today on a separate smaller psu). Four boards have damaged capacitor part 3 One board has damaged part 4 ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fanonymouse.org%2Fcgi-bin%2Fanon-www.cgi%2Fhttp%3A%2F%2Fanonymouse.org%2Fcgi-bin%2Fanon-www.cgi%2Fhttp%3A%2F%2Fanonymouse.org%2Fcgi-bin%2Fanon-www.cgi%2Fhttp%3A%2F%2Fanonymouse.org%2Fcgi-bin%2Fanon-www.cgi%2Fhttp%3A%2F%2Fanonymouse.org%2Fcgi-bin%2Fanon-www.cgi%2Fhttp%3A%2F%2Fanonymouse.org%2Fcgi-bin%2Fanon-www.cgi%2Fhttp%3A%2F%2Fanonymouse.org%2Fcgi-bin%2Fanon-www.cgi%2Fhttp%3A%2F%2Fanonymouse.org%2Fcgi-bin%2Fanon-www.cgi%2Fhttp%3A%2F%2Fimg836.imageshack.us%2Fimg836%2F6641%2Fvzab.jpg&t=665&c=wS4pGKIqTJgyOA) Here are the damaged boards ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fimageshack.us%2Fa%2Fimg812%2F6816%2F3870.jpg&t=665&c=wKL6gadyvawbxg) ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fimageshack.us%2Fa%2Fimg14%2F2222%2F9kou.jpg&t=665&c=JYdTX53R6KExLQ) You can see the capacitor pulled up part of the copper trace, but it may still function. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fimageshack.us%2Fa%2Fimg29%2F6467%2Fqvtd.jpg&t=665&c=edp4aIPOgUt1qg) ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fimageshack.us%2Fa%2Fimg842%2F7789%2F35kl.jpg&t=665&c=RNJZHP6tSk4J7Q) Night shot of 16 boards hashing away...who needs a Christmas tree. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fanonymouse.org%2Fcgi-bin%2Fanon-www.cgi%2Fhttp%3A%2F%2Fanonymouse.org%2Fcgi-bin%2Fanon-www.cgi%2Fhttp%3A%2F%2Fanonymouse.org%2Fcgi-bin%2Fanon-www.cgi%2Fhttp%3A%2F%2Fanonymouse.org%2Fcgi-bin%2Fanon-www.cgi%2Fhttp%3A%2F%2Fanonymouse.org%2Fcgi-bin%2Fanon-www.cgi%2Fhttp%3A%2F%2Fimg694.imageshack.us%2Fimg694%2F7249%2Fgcch.jpg&t=665&c=8A-J7DSI2T5SsA)
|
|
|
|
eraziel
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2013, 06:56:41 AM |
|
Is there any kind of compensation that you can get from dhl/ups/whoever delivered them? Did the package had some "fragile" markings on the outside, etc? Was the package insured? Even if not I think you can still try to get something out of them due to the fact that it's clearly their negligence that led to the damage... In the light of recent UPS employees being recorded on tape throwing packages in their delivery van and being fired afterwards, I guess it wouldn't be too hard to get some attention... Otherwise if you have to send them back to burnin and then back to the US you might even not be able to break even...
|
|
|
|
|
Beastlymac
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2013, 08:03:42 AM |
|
In case someone is asking what to buy to monitor cgminer without having to use a big monitor. Here my little monitor i use for the raspberry pi. I like its so small and can be taken with you easily... Its a sweet little thing but its not made for showing a full screen though so i have to raise the size of the letters a bit to see enough. Thats a downside. But i can connect it directly to the rpi (with a cinch-connector in between), it gets powered from the atx psu i power the bitburner with and its really cheap with 17€ including shipping. Im not sure if it can be bought outside of germany. 3.5" Auto MonitorThis is also a good display
|
Message me if you have any problems
|
|
|
slastar
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2013, 09:11:19 AM |
|
In case someone is asking what to buy to monitor cgminer without having to use a big monitor. Here my little monitor i use for the raspberry pi. I like its so small and can be taken with you easily... Its a sweet little thing but its not made for showing a full screen though so i have to raise the size of the letters a bit to see enough. Thats a downside. But i can connect it directly to the rpi (with a cinch-connector in between), it gets powered from the atx psu i power the bitburner with and its really cheap with 17€ including shipping. Im not sure if it can be bought outside of germany. 3.5" Auto MonitorThis is also a good display http://www.raspians.com/cgminerlcdstats-with-usb-2-8-tft-lcd-aida64-lcd-smartie/
|
|
|
|
|
tarmi
Legendary
Offline
Activity: 1218
Merit: 1010
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2013, 11:42:02 AM |
|
Burnin, will you please answer my question? I sent you an email, and asked you here, but you didnt address the issue.
I have (pre)ordered more then 30 boards, and paid more than 3000 euros for them. How much money will I receive if I decide to cancel my order?
order #:
489 661 711
bump.
|
|
|
|
ajw107
Newbie
Offline
Activity: 40
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2013, 12:17:44 PM |
|
Why not do what other people have done with their chip orders, and actually sell your board and chip order combined as an auction? That way you will get back far more than Burning could give you (you may make a bit of a loss, or even a profit, but I doubt that). Also burning won't be left with unused stock. Also you won't sound so ungrateful, which is what you do now. I understand the panic because of the delay in chips, and how much money you invested, but so have others and they are not acting like you. The phrase "grow a pair" comes to mind, you just had to think of alternative solutions, as I have done for you above. Alex
|
|
|
|
tarmi
Legendary
Offline
Activity: 1218
Merit: 1010
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2013, 12:42:07 PM |
|
Ungrateful? Are you kidding me? He is not doing me a favor, this is business.
After 2 months I am loosing my patience. I want a simple nand straight answer on hthat issue. Once I get it, I will think what is my next step, but I need that info.
|
|
|
|
juve4v
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2013, 12:45:53 PM Last edit: August 28, 2013, 02:39:48 PM by juve4v |
|
I really don't get the logic of certain people. So they ordered dozens of boards, payed a couple thousands of dollars for them but dont have the money for a second hand lousy Asus EeePC for example and yet they choose to mine on RPi ? I mean c'mmon.... All of that for what, 20 W more than RPI? Or 80 $ more is too much?
|
|
|
|
-Redacted-
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2013, 01:00:48 PM |
|
Why would I want to do that? The RPi is way cooler...
|
|
|
|
ajw107
Newbie
Offline
Activity: 40
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2013, 02:08:50 PM |
|
He he, I have to agree that it is the hobbist/enthusiast in us that is wanting to use a Raspberry Pi. We may as well plug them into our main PCs or as you say a second hand laptop. But that's not a challenge, the Raspberry Pi means you have to keep on playing with it and tweaking it, and keeps you entertained. The cost has nothing to do with it.
|
|
|
|
AMD FTW
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 317
Merit: 250
GET IN - Smart Ticket Protocol - Live in market!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2013, 02:30:15 PM |
|
@Burnin I have 18 boards up and running while 17 are DOA right now. If you can get me a part number for part pictured 1 on Post #2533, I can probably get 12 more of those boards up and running in the next 3 days. The other 5 maybe questionable. Link to where I want to get replacement parts http://www.mouser.com/
|
|
|
|
CumpsD
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2013, 02:34:38 PM |
|
Burnin, will you please answer my question? I sent you an email, and asked you here, but you didnt address the issue.
I have (pre)ordered more then 30 boards, and paid more than 3000 euros for them. How much money will I receive if I decide to cancel my order?
order #:
489 661 711
bump. Send a mail through the shop, works better than posting in a busy thread
|
|
|
|
tarmi
Legendary
Offline
Activity: 1218
Merit: 1010
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2013, 02:49:08 PM |
|
Send a mail through the shop, works better than posting in a busy thread
Already did that, didnt receive any answer. on the other hand, I saw Burnin making plans to make bitfury board. I am not feeling comfortable with that.
|
|
|
|
-Redacted-
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2013, 03:09:47 PM |
|
Because? I'd be absolutely thrilled to have Bitfury based boards from Burnin.
|
|
|
|
AMD FTW
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 317
Merit: 250
GET IN - Smart Ticket Protocol - Live in market!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2013, 03:24:33 PM |
|
Send a mail through the shop, works better than posting in a busy thread
Already did that, didnt receive any answer. on the other hand, I saw Burnin making plans to make bitfury board. I am not feeling comfortable with that. You need to understand that Burnin is just the middle man. He can't control when he'll receive the Avalon chips and he stated this clearly. When you purchased your Avalon chips you accepted this risk. My order was delayed over 60 days. While this sucks, I don't blame burnin at all as he didn't have anything to do with this. You paid him to have components ready to assemble the boards once those Avalon chips came in. It's not like he can just go down the street and return these components as the pcb boards were probably already made up and electronic components are sold on reels typically which would have been purchased. As far as Bitfury chips go, why shouldn't he get involved. He has a company that needs to make money. Both chip manufacturers are separate and he has no vested interest in either one besides selling fully assembled boards and turning a profit.
|
|
|
|
marto74
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2013, 03:35:41 PM |
|
Send a mail through the shop, works better than posting in a busy thread
Already did that, didnt receive any answer. on the other hand, I saw Burnin making plans to make bitfury board. I am not feeling comfortable with that. You need to understand that Burnin is just the middle man. He can't control when he'll receive the Avalon chips and he stated this clearly. When you purchased your Avalon chips you accepted this risk. My order was delayed over 60 days. While this sucks, I don't blame burnin at all as he didn't have anything to do with this. You paid him to have components ready to assemble the boards once those Avalon chips came in. It's not like he can just go down the street and return these components as the pcb boards were probably already made up and electronic components are sold on reels typically which would have been purchased. As far as Bitfury chips go, why shouldn't he get involved. He has a company that needs to make money. Both chip manufacturers are separate and he has no vested interest in either one besides selling fully assembled boards and turning a profit. +1
|
|
|
|
|