AMD Ryzen hashrate?

[Set Ready Go]

So a dude on reddit were getting 600-610 hashes monero using :
2700x @ stock 3850,  biostar tb350 6gpu rig, 4gb ram 2133,

Not sure what mining program nor had he enabled large pages yet.

[dirton]

I was able to find this link on google:
http://www.planet3dnow.de/cms/37852-summit-ridge-vs-pinnacle-ridge-beim-monero-mining/

[Set Ready Go]

I was able to find this link on google:
http://www.planet3dnow.de/cms/37852-summit-ridge-vs-pinnacle-ridge-beim-monero-mining/

Cheers Man!
Intresting. 17% higher hashrate.

[Iamtutut]

So a dude on reddit were getting 600-610 hashes monero using :
2700x @ stock 3850,  biostar tb350 6gpu rig, 4gb ram 2133,

Not sure what mining program nor had he enabled large pages yet.

Slow memory for this CPU, should be minimum 2933MHz, even 3200MHz. May be the CPU is slow down by the mem speed.

[starmax]

You got a beast there! :p
I have seen prices drop for 1920x so im feeling the urge to buy it.

From reviews that i read seems noctua tr4 cooler even "better" then the aio cooler.

Microcenter has the 1950x for $730 right now, so check it out if you can.

Noctua TR coolers are very good, well actually all their coolers are very good...  I went with Arctic for a cheap temp solution, knowing i would re-use my custom loop eventually.

[starmax]

So a dude on reddit were getting 600-610 hashes monero using :
2700x @ stock 3850,  biostar tb350 6gpu rig, 4gb ram 2133,

Not sure what mining program nor had he enabled large pages yet.

Slow memory for this CPU, should be minimum 2933MHz, even 3200MHz. May be the CPU is slow down by the mem speed.

Hmm, I ran a bunch of tests yesterday on my 1700 and found that RAM speed had very little impact on Ryzen hashing performance with XMR-stak.  Running 3.7 w/2133 memory was getting about 570 h/s.  Running 3.7 w/3200 memory was getting about 575 h/s but used about 15 more watts due to the RAM overclock voltage (1.2v vs 1.4v).  Also, please note these are XMR-stak monero7 hash rates while co-mining with Claymore on 5x1070s.  If I shutdown Claymore I get about 610 h/s.

Edit:  Just saw that post, dude replied that he did NOT have large pages enabled.

[timbereagle]

i did not have good cpu in past. now i have amd ryzen 1600. can anyone say xmr hashrate? ı think it does not make money more than it consumes electricity.

[starmax]

i did not have good cpu in past. now i have amd ryzen 1600. can anyone say xmr hashrate? ı think it does not make money more than it consumes electricity.

Search for 1600 here (probably 450-550 h/s):

http://monerobenchmarks.info/searchCPU.php

Plug in numbers here:

https://whattomine.com/coins/101-xmr-cryptonightv7

You will be surprised how much you can make right now mining Monero with these Ryzen cpus.

[lncm]

So a dude on reddit were getting 600-610 hashes monero using :
2700x @ stock 3850,  biostar tb350 6gpu rig, 4gb ram 2133,

Not sure what mining program nor had he enabled large pages yet.

Slow memory for this CPU, should be minimum 2933MHz, even 3200MHz. May be the CPU is slow down by the mem speed.

Hmm, I ran a bunch of tests yesterday on my 1700 and found that RAM speed had very little impact on Ryzen hashing performance with XMR-stak.  Running 3.7 w/2133 memory was getting about 570 h/s.  Running 3.7 w/3200 memory was getting about 575 h/s but used about 15 more watts due to the RAM overclock voltage (1.2v vs 1.4v).  Also, please note these are XMR-stak monero7 hash rates while co-mining with Claymore on 5x1070s.  If I shutdown Claymore I get about 610 h/s.

Edit:  Just saw that post, dude replied that he did NOT have large pages enabled.

RAM speeds shouldn't make a big difference, the whole point is to run each miner instance on 2 Mb CPU L3 cache...

[Set Ready Go]

update:  2700x , TB350-BTC, 4 gb 2133 ram , 6 rx 570 ,  at stock speed with large pages hes getting 680h/s

with some mining program tweaking and OC 700+  no problem.

[lncm]

Impressive numbers for a mainstream CPU.

[Emoss3417]

I just got a Ryzen 5 2400g for a new mining rig today. When I fire it up tomorrow, I will let you guy's know.

[stevascha]

update:  2700x , TB350-BTC, 4 gb 2133 ram , 6 rx 570 ,  at stock speed with large pages hes getting 680h/s

with some mining program tweaking and OC 700+  no problem.

any review for yescryptr16 algo?
i still used 1700x, looking more info is it worth to upgrade 2700x or not

[lncm]

Ryzens are beasts on Cryptonight.

On other algos, they suffer a bit. Can't really tell if from their architecture, or poor optimized software.

My 1700 does 17 H/s on Arionum with 14 Threads (Argon2i + SHA512), while my puny 15W i7 7500U (laptop) does 10 H/s on 4 threads...

Verium Blake2s wasn't brilliant also.

[Emoss3417]

So, the Ryzen 2400g is mining 850 h/s on IPBC without GPU enabled. I'm not the biggest techie, but it BSOD with CPU/GPU with stock settings. I'm sure if someone figured out a proper code it would mine near a stock 1700.

[rednoW]

ryzens g-series have only half of cache memory, amd was not able to fit gpu core and big cache on this die. So it will not be as good for cryptonight as classic ryzens are

[m.vina]

I don't understand why you would build a mining rig around a Ryzen CPU though. When it comes to mining, EFFICIENCY is the only key and major enemy. With the ryzen motherboards available right now you would be constrained to at most 8-GPU rigs. Compare that to the efficiency of a 13-GPU or better yet 19-GPU rig and what do you have..

I would say ryzen CPU mining is for gaming rigs who just want the option to mine but are not seriously doing it for profit.

[Lontonbit]

Anyone know why my 1800x mining at 630 m/h on nicehash is saying it’s only 17 cents a day?? It use to show $1.50 a day running at the same 630 m/h. I know the price has come down but not that much. My 1700x at 550 mh use to give like $1.25 now it’s 15 cents a day?? Is this a nicehash glitch?

[lncm]

I don't understand why you would build a mining rig around a Ryzen CPU though. When it comes to mining, EFFICIENCY is the only key and major enemy. With the ryzen motherboards available right now you would be constrained to at most 8-GPU rigs. Compare that to the efficiency of a 13-GPU or better yet 19-GPU rig and what do you have..

I would say ryzen CPU mining is for gaming rigs who just want the option to mine but are not seriously doing it for profit.

Not everyone has the money and space to have a 13-19 CPU rig...

And some people do use the computer for more than mining, keeping them on and mining when working is done.

[Iamtutut]

I don't understand why you would build a mining rig around a Ryzen CPU though. When it comes to mining, EFFICIENCY is the only key and major enemy. With the ryzen motherboards available right now you would be constrained to at most 8-GPU rigs. Compare that to the efficiency of a 13-GPU or better yet 19-GPU rig and what do you have..

I would say ryzen CPU mining is for gaming rigs who just want the option to mine but are not seriously doing it for profit.

USB hub.