[ANN] a new coin based on Litecoin - CHNCoin

[TheSwede75]

Stale/invalids are rampant when solo mining or am I just unlucky/stupid?

If blocks are being found quickly, you need your client to be updated faster that a new block was found so it stops working on useless shares (stales). Can do that setting other pools in rotation for their longpoll data. Might try something like --expiry 5. Or 1. It causes a lot of network traffic to a pool, but if you are solo mining no harm. This way your client will check your local solo server for any new changes quicker than the 120 second default.

Can I use expiry as flags in guiminer? Seems I can. Nevermind and thank you.

[RetardedMonkey]

can anyone tell me how i put bobs pool and all other known chncoin pools in my cgminer bat

so if one fails when i sleep it will go on to the next pool?


can some give me an exact example since if you leave any room for error i will certainly make it.
thanks

https://bitcointalk.org/index.php?topic=28402.0

[blastbob]

can anyone tell me how i put bobs pool and all other known chncoin pools in my cgminer bat

so if one fails when i sleep it will go on to the next pool?


can some give me an exact example since if you leave any room for error i will certainly make it.
thanks

just add more -o host1 -u user1 -p pass1 -o host2 -u user2 -p pass2

[roy7]

We need more working pools, i am getting hammered

Argh you tempt me. I have a working front end for the pool I'm setting up, but payments aren't automatic yet. I don't want to get tied up making payments to hundreds of miners by hand, lol.

[blastbob]

We need more working pools, i am getting hammered

Argh you tempt me. I have a working front end for the pool I'm setting up, but payments aren't automatic yet. I don't want to get tied up making payments to hundreds of miners by hand, lol.

What is your CNC address? ill give you some motivation

[cryptohunter]

can anyone tell me how i put bobs pool and all other known chncoin pools in my cgminer bat

so if one fails when i sleep it will go on to the next pool?


can some give me an exact example since if you leave any room for error i will certainly make it.
thanks

just add more -o host1 -u user1 -p pass1 -o host2 -u user2 -p pass2

thanks, will try that now

Please bring bobs pool back, it was awesome.

[Joerii]

I have pretty much everything configured to solo mine, now i'm at the last step : configuring the solomine bat file.

Could someone be so kind as to post good settings for an AMD 7950 ?
I have three of them installed.

I've only used GUIminer-scrypt before, I'll read the the manual later but righth now I just wanna copy paste something and have my three cards run solo

Anyone, please ? I'll send 500 CNC as a bounty if you can help me set it up.

[Fernandez]

He's just said it's down.

I'm back soloing

Does solo mining work for you guys? I'm only getting rejects.

Maybe luck; but I have got 11 accepts/4 rejects; with a total of 3 confirms. Only problem is that my hashreate is too low (70 kH/s),

[roy7]

What is your CNC address? ill give you some motivation

LOL. Just found out about CNC this morning from work, haven't been home yet. Will be in a few hours. Don't even have CNC installed yet! (I have about every other coin though, even stuff like MinCoin, lol.)

[tidus_13]

OMG only 1 day 44 pages posts??

how do i mine this?

[RetardedMonkey]

Anyone, please ? I'll send 500 CRC as a bounty if you can help me set it up.

Oh.. well in that case!

cgminer -o pool.com:1111 -u user -p pass --scrypt --thread-concurrency 21712 --lookup-gap 2 -w 256 -v 1 -g 1 -I 18

Add your proper pool details in and maybe modify intensity to 19 if your cards allow it (20 if you're lucky).

Trial and error friend.

[Tigggger]

I have pretty much everything configured to solo mine, now i'm at the last step : configuring the solomine bat file.

Could someone be so kind as to post good settings for an AMD 7950 ?
I have three of them installed.

I've only used GUIminer-scrypt before, I'll read the the manual later but righth now I just wanna copy paste something and have my three cards run solo

Anyone, please ? I'll send 500 CNC as a bounty if you can help me set it up.

I use this for my 7950's

Code:

cgminer.exe --scrypt -u CHNADDRESS -p x -o POOL -w 256 -v 1 -I 18 -g 1 --thread-concurrency 21712 --gpu-engine 1050 --gpu-memclock 1625 --gpu-vddc 1.087 --temp-target 75 --auto-fan

[gpudude]

cgminer cannot be downloaded for windows at the moment... sucks!!

[datguyian]

I have pretty much everything configured to solo mine, now i'm at the last step : configuring the solomine bat file.

Could someone be so kind as to post good settings for an AMD 7950 ?
I have three of them installed.

I've only used GUIminer-scrypt before, I'll read the the manual later but righth now I just wanna copy paste something and have my three cards run solo

Anyone, please ? I'll send 500 CNC as a bounty if you can help me set it up.

I average about 640 kh/s from each card with these settings:

cgminer.exe -s 1 -E 1 --queue 0 --scrypt -o altcoin.pw:1024 -u CLnNoTE4SUf8qSGoSV2Z15cJSkCAkEZLLW -p x -o 127.0.0.1:8108 -u 12345 -p 12345 --shaders 1792 --gpu-engine 1100 --gpu-memclock 1500 --gpu-fan 100 -I 20 -w 256 --lookup-gap 2 --thread-concurrency 24000 -g 1

I have 2 Sapphire Vapor-X 7950's.

[Joerii]

I have pretty much everything configured to solo mine, now i'm at the last step : configuring the solomine bat file.

Could someone be so kind as to post good settings for an AMD 7950 ?
I have three of them installed.

I've only used GUIminer-scrypt before, I'll read the the manual later but righth now I just wanna copy paste something and have my three cards run solo

Anyone, please ? I'll send 500 CNC as a bounty if you can help me set it up.

I use this for my 7950's

Code:

cgminer.exe --scrypt -u CHNADDRESS -p x -o POOL -w 256 -v 1 -I 18 -g 1 --thread-concurrency 21712 --gpu-engine 1050 --gpu-memclock 1625 --gpu-vddc 1.087 --temp-target 75 --auto-fan

AH yes, temp target i want that. Hey, so if I paste this into the bat, will it automatically use all 3 of my cards ?

[datguyian]

I have pretty much everything configured to solo mine, now i'm at the last step : configuring the solomine bat file.

Could someone be so kind as to post good settings for an AMD 7950 ?
I have three of them installed.

I've only used GUIminer-scrypt before, I'll read the the manual later but righth now I just wanna copy paste something and have my three cards run solo

Anyone, please ? I'll send 500 CNC as a bounty if you can help me set it up.

I use this for my 7950's

Code:

cgminer.exe --scrypt -u CHNADDRESS -p x -o POOL -w 256 -v 1 -I 18 -g 1 --thread-concurrency 21712 --gpu-engine 1050 --gpu-memclock 1625 --gpu-vddc 1.087 --temp-target 75 --auto-fan

AH yes, temp target i want that. Hey, so if I paste this into the bat, will it automatically use all 3 of my cards ?

Yes, but you can also use the --device switch to specify which cards to run if you don't want to run all of them. Example, just your first two cards: --device 0,1

[RetardedMonkey]

I average about 640 kh/s from each card with these settings:

cgminer.exe -s 1 -E 1 --queue 0 --scrypt -o altcoin.pw:1024 -u CLnNoTE4SUf8qSGoSV2Z15cJSkCAkEZLLW -p x -o 127.0.0.1:8108 -u 12345 -p 12345 --shaders 1792 --gpu-engine 1100 --gpu-memclock 1500 --gpu-fan 100 -I 20 -w 256 --lookup-gap 2 --thread-concurrency 24000 -g 1

I have 2 Sapphire Vapor-X 7950's.

Bad.

[datguyian]

I average about 640 kh/s from each card with these settings:

cgminer.exe -s 1 -E 1 --queue 0 --scrypt -o altcoin.pw:1024 -u CLnNoTE4SUf8qSGoSV2Z15cJSkCAkEZLLW -p x -o 127.0.0.1:8108 -u 12345 -p 12345 --shaders 1792 --gpu-engine 1100 --gpu-memclock 1500 --gpu-fan 100 -I 20 -w 256 --lookup-gap 2 --thread-concurrency 24000 -g 1

I have 2 Sapphire Vapor-X 7950's.

Bad.

How so?

[RetardedMonkey]

How so?

For one, no one needs the extra noise 100% fans make.

Secondly, your fans will burn out in no time.

[TheSwede75]

Bob's pool, please come back! I am stuck in solo swamp and testing out a 'French' pool. Feels outright UnaMurcan!