1080Ti Specific - Best mining option

[milicic]

Miningpoolhub.
Using miner which is shared by someone earlier in this thread.
Don't know how but hashrate shown on MPH is always more then which I saw on miner.
Minig 2.6 Zcoin per day with 7 GTX 1080 Ti.

Zcoin now $12.5, so currently $4.6/ card
 

Which miner do you use?

Check here
http://jkcrypto.com/how-to-mine-zcoin-xzc/

I tried this, did everything as described but miner keeps crashing. Installed cuda 9, tried different clocks, tried different miners...but nothing. Have 6x 1080ti Asus rog strix which perfectly mines zcash on much higher clocks...

Did miner run for few minutes?
I am on older Nvidia version 385.28.
Latest nvidia driver gave me problems and lesser hashrate.

Miner works for 10 mins, max an hour and than crashes saying "the launch timed out and was terminaterd". Tried different drivers, now latest nvidia drivers. Tried different clocks, even stock clock and nothing... Any idea?

Is CUDA installed?

First tried with regular cuda, than installed cuda 9. Its not that miner doesnt work, it works fine for 10-60 minutes, and than crashes saying "the launch timed out and was terminaterd". Its like the pool rejects connection or something like that.

[1714196612]

1714196612

[kalymist]

when pool is attacked, can disconnect some people with timeout.

[ROFLED]

CUDA toolkits is not required for mining. For use, not developing or compiling, drivers decides in this case

[szasza576]

Miningpoolhub.
Using miner which is shared by someone earlier in this thread.
Don't know how but hashrate shown on MPH is always more then which I saw on miner.
Minig 2.6 Zcoin per day with 7 GTX 1080 Ti.

Zcoin now $12.5, so currently $4.6/ card
 

Which miner do you use?

Check here
http://jkcrypto.com/how-to-mine-zcoin-xzc/

I tried this, did everything as described but miner keeps crashing. Installed cuda 9, tried different clocks, tried different miners...but nothing. Have 6x 1080ti Asus rog strix which perfectly mines zcash on much higher clocks...

Did miner run for few minutes?
I am on older Nvidia version 385.28.
Latest nvidia driver gave me problems and lesser hashrate.

Miner works for 10 mins, max an hour and than crashes saying "the launch timed out and was terminaterd". Tried different drivers, now latest nvidia drivers. Tried different clocks, even stock clock and nothing... Any idea?

Is CUDA installed?

First tried with regular cuda, than installed cuda 9. Its not that miner doesnt work, it works fine for 10-60 minutes, and than crashes saying "the launch timed out and was terminaterd". Its like the pool rejects connection or something like that.

What OC settings do you use?
On my regular 1080 cards I had to UNDER-clock by 50 MHz to stabilize the rig.
My Ti cards accept ~100 MHz less OC for Lyra2z than what I have for Equihash algo.

[ManuBBXX]

Do you, guys, set the intensity of the miner to 20 instead of 16 for ZCoin ?

[suilow1991]

Do you, guys, set the intensity of the miner to 20 instead of 16 for ZCoin ?

beginning i use default 16, now i run -i 22 okay But the change in hashrates is not much

[milicic]

Miningpoolhub.
Using miner which is shared by someone earlier in this thread.
Don't know how but hashrate shown on MPH is always more then which I saw on miner.
Minig 2.6 Zcoin per day with 7 GTX 1080 Ti.

Zcoin now $12.5, so currently $4.6/ card
 

Which miner do you use?

Check here
http://jkcrypto.com/how-to-mine-zcoin-xzc/

I tried this, did everything as described but miner keeps crashing. Installed cuda 9, tried different clocks, tried different miners...but nothing. Have 6x 1080ti Asus rog strix which perfectly mines zcash on much higher clocks...

Did miner run for few minutes?
I am on older Nvidia version 385.28.
Latest nvidia driver gave me problems and lesser hashrate.

Miner works for 10 mins, max an hour and than crashes saying "the launch timed out and was terminaterd". Tried different drivers, now latest nvidia drivers. Tried different clocks, even stock clock and nothing... Any idea?

Is CUDA installed?

First tried with regular cuda, than installed cuda 9. Its not that miner doesnt work, it works fine for 10-60 minutes, and than crashes saying "the launch timed out and was terminaterd". Its like the pool rejects connection or something like that.

What OC settings do you use?
On my regular 1080 cards I had to UNDER-clock by 50 MHz to stabilize the rig.
My Ti cards accept ~100 MHz less OC for Lyra2z than what I have for Equihash algo.

I tried many OC settings, tried even with stock settings, nothing changes. Could someone explain what "the launch timed out and was terminaterd" means, because my drivers dont crash, I dont need to reinstall or even restart PC, just close ccminer and start again...

[szasza576]

What OC settings do you use?
On my regular 1080 cards I had to UNDER-clock by 50 MHz to stabilize the rig.
My Ti cards accept ~100 MHz less OC for Lyra2z than what I have for Equihash algo.

I tried many OC settings, tried even with stock settings, nothing changes. Could someone explain what "the launch timed out and was terminaterd" means, because my drivers dont crash, I dont need to reinstall or even restart PC, just close ccminer and start again...

I got this error when I had too much OC. I have Asus Strix 1080Ti OC variants and these are my settings: PL: 55 (doesn't really matter as it sticks at ~52%), Core: +90, Mem: -500
If you have non-OC variant then most probably these exact values won't work for you. I also have 6x Asus Strix in my rig.
I suggest to give a try with Core: -100 (yeap minus) and Mem: -500.
Lyra2z drives the GPU to much higher. At Lyra2z with +90 Core the GPU goes at 2050 MHz. At Equihash with +125 Core the GPU goes at ~1850-1900 MHz.
This might sound strange but with -100 core you can exclude the OC issue factor.
As I mentioned earlier on my EVGA FTW2 1080 cards I had to underclock with -50 MHz and now those go at 1975-2000 MHz. On the stock settings those were freeze.

[igrokvpoker]

I have bought 1070, I will tell you about its specifications later on. I hope it won't have a very big difference with 1080
And soon 1070ti is approaching. I wonder, who good it will be

[CjMapope]

I have bought 1070, I will tell you about its specifications later on. I hope it won't have a very big difference with 1080
And soon 1070ti is approaching. I wonder, who good it will be

meh, most of us have 1070's , we dont really care about them in this thread   This is for our 1080ti specific cards (as the title says lol)
I preordered a buncha 1070ti's, ill review them around Nov5th if noone else does here


Anyone mining Vivocoin? seems profitable on Neoscrypt, tho not on any good exchanges yet  im mining a few, str8 selling them tho, masternodes seems expensive for a shitcoin
noticed "klausT" miner does best hash, but it's been hanging for me so im using ccminer 2.2.2

[killerelite]

Currently mining zcoin on mining pool hub , with 3 1080 tis
getting around 0.7 zcoin a day
Was getting 1000+ dgb a day mining on the blocks factory
Might just switch back , but the power consumption on zcoin is just too damm low

Anyways my gpus show 98% usuage at 18 intensity should i increase any more ?

Card model Gigabyte aurous 1080ti

[jmigdlc99]

Have you guys tried BTCZ? Similar to bitcoin gold but without the scam. Solid project IMHO.

Currently mining BTCZ at 680 sols (equihash) and 160+ watts using EWBF's miner.
Total revenue is currently at $3+ per day per 1080ti.

[kalymist]

BSD, XZC, BTX, SMART, FTC, LUX, ETP, VIVO ...

So many to mine, that if you sell them when value is at a peak, then profitability can almost be the same for all of these.

Just need to be patient for the right time to sell.

[anujsainicse]

Have you guys tried BTCZ? Similar to bitcoin gold but without the scam. Solid project IMHO.

Currently mining BTCZ at 680 sols (equihash) and 160+ watts using EWBF's miner.
Total revenue is currently at $3+ per day per 1080ti.

Earlier was getting 1000 BTCZ/card. Now difficulty has been increased

[kalymist]

Have you guys tried BTCZ? Similar to bitcoin gold but without the scam. Solid project IMHO.

Currently mining BTCZ at 680 sols (equihash) and 160+ watts using EWBF's miner.
Total revenue is currently at $3+ per day per 1080ti.

Earlier was getting 1000 BTCZ/card. Now difficulty has been increased

Yes it doesn't worth it anymore.

[abudfv2008]

Several of these guys come here from time to time to say they're making 50/60% more daily profit than the actual value. Just don't believe them and don't feed them. Whattomine gives you a rough estimate, you can get maybe a dollar more than what's showing there but not 50% more, ignore these clowns.

Yes yes. Don't trust these clowns mine ethereum and zec only.

[BellicoseBenny]

I'm mining VTC only because this coin is so strong it will probably hit 10 USD soon

Zcoin also looks very strong. But I don't think it can stay strong if BTC hits 7k

[dragonmike]

Aaaaah, VTC... I remember when it was trading at $12 right after the launch, almost 4 years ago. I've believed in that coin, I've mined it when it was on Scrypt-N algo... but it just too too long (or I wasn't patient enough). Oh well.

[BellicoseBenny]

Aaaaah, VTC... I remember when it was trading at $12 right after the launch, almost 4 years ago. I've believed in that coin, I've mined it when it was on Scrypt-N algo... but it just too too long (or I wasn't patient enough). Oh well.

I'm just praying it skyrockets and bring the price of hash up with it.

I didn't like the mining system at first but I gotta say it's nice to have a very difficult to abuse decentralized pool system

[Temporel]

Have you guys tried BTCZ? Similar to bitcoin gold but without the scam. Solid project IMHO.

21 billions coins with whales having already  at least 250 000 000 of them , so no, its not a solid project.