Re: [ANN] Las Vegas coin. Masternode cost only $250!! Only 400,000 coins total!

[cryptonit]

once u have the dependencies on linux 16.04 or 14.04
u can easy compile the headless wallet for remote masternode with

Code:

cd ~
./lasvegascoin-cli stop
rm -r LasVegasCoin2
git clone https://github.com/Vegas-Guy/LasVegasCoin2.git
chmod -R +x LasVegasCoin2
cd LasVegasCoin2
./autogen.sh
./configure
make install
cd /root/LasVegasCoin2/src
mv lasvegascoind lasvegascoin-cli lasvegascoin-tx ~/
cd ~
rm -r LasVegasCoin2
./lasvegascoind

[cryptonit]

resync chain from zero

and learn to read logs

the log state just that u dont accept POS blocks from the not updated wallets
because they dont give the masternode 2 VGS
and that u start banning this old nodes
which is what ur wallet should do

i full aggree vegasguy fucked it up once again
but for the best of the coin now only way is go through the upgrade
and the new wallet and the new masternode rewards are working

i did take care explorer is updated too now

so to see if u are sync with correct chain just check ur latest wallet blocknumber with explorer blocknumber
if its same or +/- 2 u are on correct chain

https://chainz.cryptoid.info/vgs/

i dont know why i put free support work in this coin
maybe because the suffering of all this people stick as long with this coin as i did
make me feel their pain and i want to help at least a bit

vegasguy if u feel a bit ashamed to not have done all that by urself
u can donate here VBVYpgV5mXcwfjKEDPjcYGXyDS8YKphd5n

[goosewobbler]

Here's an updated Mac wallet compiled from master of the new repo.

https://github.com/goosewobbler/LasVegasCoin2/releases/tag/v2.5.0.0

[Glen123NEW]

jepp, thx for pointing this out... its the log started before MN sync ready .
my fault


now its synced with newest MN
2018-04-02 11:52:14 mnb - Got NEW Masternode entry - f6c73cc570ed75ee524d3bd2c3c81dc2202df5649ffd87b81b138ede6e7082ad - 23.95.9.117:60702 - CTxIn(COutPoint(5455889a8c83d6e527a4487fb2209d71d9f3858221ebd416ab7e320e990dfa47, 1), scriptSig=$
2018-04-02 11:52:20 mnb - Got NEW Masternode entry - 88e2b540e59d7ed04d2bb6d002df49c7247a65464b7cab02eab6ac77af98a21d - 173.212.238.176:60702 - CTxIn(COutPoint(87896346c6569bbaa56e6ded93b8f250a8093ee6b59c4a7dc7d456ccc2caccb9, 0), script$
2018-04-02 11:52:21 mnb - Got NEW Masternode entry - 312a6cbbb0fb840743236a909381661ed94729622c5d4080c9420c282d3aff40 - 24.116.169.234:60702 - CTxIn(COutPoint(bbc29bc15315b9adcc1c8dbade99a02628d17b2484431eff802deaa7a64ff4d9, 0), scriptS$
2018-04-02 11:52:23 mnb - Got NEW Masternode entry - 5d97575ecbb8d54d2302ba4a5ff0e28c058f9252b2d7bf263529e5ca26c3a970 - 51.254.212.133:60702 - CTxIn(COutPoint(a4b575247f332b3d0f8e28f55d93be8217f1b691c6ea423e9e3065ea81ce41a3, 1), scriptS$
2018-04-02 11:52:34 mnb - Got NEW Masternode entry - 0822db0e451ba02c0e28e402d1889cae2024397f6135ea41fbfc6930424f79a0 - 23.95.216.157:60702 - CTxIn(COutPoint(9be250299f49067b39a3519dec20789e5ff17ac01395f2d2855829ee077aed38, 1), scriptSi$
2018-04-02 11:52:36 mnb - Got NEW Masternode entry - 8a3f097325f03e10a0ebc835e8cd89fedd6cc17ee31eb7f14a587c1a46b68a68 - 68.108.95.216:60702 - CTxIn(COutPoint(b637f35886510dffec355b92d35e27c22eadcd4425171401fcba77d95329542f, 1), scriptSi$
2018-04-02 11:52:45 connect() to 81.190.0.174:60702 failed after select(): No route to host (113)
2018-04-02 11:52:51 receive version message: /VGS Core:2.0.0.3/: version 70715, blocks=39411, us=5.147.206.234:53653, peer=40
2018-04-02 11:52:51 Added time data, samples 33, offset +0 (+0 minutes)
2018-04-02 11:52:51 nTimeOffset = +0  (+0 minutes)

[vegasguy]

Again guys. I admit, I messed this up, and should have moved the fork block for 45,000. Lesson learned. At the end of the day , everything is working. Please understand the reason for the change. .5 VGS to the staker, and .5 vgs to the masternode made no sense whatsoever. I wanted to increase buying pressure through masternodes. Anyway, I shall now move forward with more promotions, the wallet is the way I want it. I will also cleanup the github.

My apologies to everyone.



Vegas

[vegasguy]

This is what I used to set up my remote MN.  I am thinking that maybe this script installed an older wallet on my VPS, and this is why I'm getting orphans.  Does this sound right?

Correct, the repo used for this release has changed yet again.  I need to update the script.

Vegas guy, are we going to have a new repo for every release?  Additionally, the version in the about dialog seems to be still 2.0.0.3

This is not very professional.

Clearly, it would not make any sense to keep changing repos. The previous build from Limxdev was not easy to compile on windows, and uses "pro lib". It took 3 different devs to try and compile it on windows, this caused the delay,  and the 3rd finally could do it. I am aware the repo is messy, and will get it cleaned up.

Vegas

[investgeek]

Hi all,

I have already invested in Celcius network, Salt lending, eth lend ICO's and want to invest in Welltrado.
What do you think guys? Is it an interesting project?

Thank you for your answers!

[gregofdoom]

Again guys. I admit, I messed this up, and should have moved the fork block for 45,000. Lesson learned. At the end of the day , everything is working. Please understand the reason for the change. .5 VGS to the staker, and .5 vgs to the masternode made no sense whatsoever. I wanted to increase buying pressure through masternodes. Anyway, I shall now move forward with more promotions, the wallet is the way I want it. I will also cleanup the github.

My apologies to everyone.

Vegas

Okay, vegas, nothing happened, you wanted good.
We are with you and we will support you.

On the other hand, it is also worth listening to wise people such as Limxdev or cryptonit  

[vegasguy]

Again guys. I admit, I messed this up, and should have moved the fork block for 45,000. Lesson learned. At the end of the day , everything is working. Please understand the reason for the change. .5 VGS to the staker, and .5 vgs to the masternode made no sense whatsoever. I wanted to increase buying pressure through masternodes. Anyway, I shall now move forward with more promotions, the wallet is the way I want it. I will also cleanup the github.

My apologies to everyone.

Vegas

Okay, vegas, nothing happened, you wanted good.
We are with you and we will support you.

On the other hand, it is also worth listening to wise people such as Limxdev or cryptonit  

I think Cryptonit was very hard on me. I didnt foresee that the Limxdev wallet would be so difficult to compile in windows. Its NOT a normal windows compile. Im going to keep this short, because people come here for information not drama, @Cryptonit, I dont know why your so aggressive towards me, I have NEVER attacked you in the dmd threads, in fact, I have defended you!!! Agreed this update never went smooth. But all turned out well. If you want a donation, be a little nicer.

Vegas

[vegasguy]

If you want to write a script to help them setup their ubuntu VPS  200 Las Vegas coins for that.

...Ahem.

https://github.com/goosewobbler/vps

So I've been helping some people out in Discord DMs with this, might as well post proper instructions here.  The following sets up one node called lasvegas_node1, and assumes you know how to send yourself funds with a wallet, and can use the linux editor vim.

Instructions (assumes one node called lasvegas_node1)

<on master wallet>

<Send 1000 VGS to yourself - must be exact>
<Tools menu, debug console>

Enter the following commands:

Code:

masternode genkey

The result of this is your MN private key.  You need it later.

Code:

masternode outputs

The result of this is your MN transaction id and index in the format "{tx_id}": "{index}".  You need those later.

<Tools menu, open masternode configuration file>

Add the following details in this file in the following format:

Code:

lasvegas_node1 {VPS IP address}:60702 {MN private key} {MN transaction id} {MN transaction index}

Save the file and close the wallet.  Open the wallet again.

<on VPS>
Run the following commands to compile and install the VPS wallet:

Code:

git clone https://github.com/goosewobbler/vps.git && cd vps && ./install.sh -p lasvegascoin -n 4 -c 1

Now edit the VPS wallet config file:

Code:

vim /etc/masternodes/lasvegascoin_n1.conf

Insert your private key and the IP address of the VPS in the appropriate places and save the file.



Now activate the node locally:

Code:

/usr/local/bin/activate_masternodes_lasvegascoin

You will need to wait for the VPS wallet blockchain to fully sync before you can start the node remotely.  
Keep running this command, eventually the value of 'blocks' will stabilise:
 

Code:

/usr/local/bin/lasvegascoin-cli -conf=/etc/masternodes/lasvegascoin_n1.conf getinfo

Can someone confirm this , so I can pay the bounty?



The value of 'blocks' will increase until it reaches the 'up to block' value on the block explorer:

https://chainz.cryptoid.info/vgs/#

When the VPS wallet is fully synced, you can start the node remotely:

<on master wallet>
<Masternodes => My Masternodes => Start MISSING>

You can verify the status of the VPS wallet and masternode with the following:

<on VPS>

Code:

/usr/local/bin/lasvegascoin-cli -conf=/etc/masternodes/lasvegascoin_n1.conf masternode status

Disclaimer

• This has been tested with Vultr Ubuntu 16.04 instance ($5/month).  The $2.50 instances should be fine for a single node but they are always sold out in my region.
• Don't use IPV6 addresses, I have yet to see the script work with those for any coin.
• The script supports more than one node per VPS instance but I prefer to keep mine separate so haven't tested that.
• This is not my script, but I did the LasVegasCoin integration amongst others, this should be merged upstream when Florian gets to my PR, it's been sat there a while with the others.  Seems he's busy messing around with Achilles Coin
• PR for the geeks/interested:
  https://github.com/masternodes/vps/pull/31

Sign up for Vultr here:  https://www.vultr.com/?ref=7282546

VGS address:  VMATmN4BZRSTNES5dpzz34pC7EFJLnWh1F

This is what I used to set up my remote MN.  I am thinking that maybe this script installed an older wallet on my VPS, and this is why I'm getting orphans.  Does this sound right?

Ok.. I should have read the whole article. Can this be modified so we can setup our own server, to run multiple nodes, and not pay a 3rd party for vps?  Can you write the instructions for it. Also goosewobbler, and Cryptonit added some information. Does it need to be added to this article?

Ok.. I owe a lot of people, so Im going to start sending out rewards.

Vegas

[examplens]

Here's an updated Mac wallet compiled from master of the new repo.

https://github.com/goosewobbler/LasVegasCoin2/releases/tag/v2.5.0.0

vegasguy Is this right link to official latest MAC wallet?
I am going to finish the website it would be fine to set correct links.

[vegasguy]

Here's an updated Mac wallet compiled from master of the new repo.

https://github.com/goosewobbler/LasVegasCoin2/releases/tag/v2.5.0.0

vegasguy Is this right link to official latest MAC wallet?
I am going to finish the website it would be fine to set correct links.

Yes, it is untested. Please test, so I can pay reward.

Vegas

[vegasguy]

Coinexchange.io emailed me, they are on the latest wallet

Vegas

[goosewobbler]

Ok.. I should have read the whole article. Can this be modified so we can setup our own server, to run multiple nodes, and not pay a 3rd party for vps?  Can you write the instructions for it. Also goosewobbler, and Cryptonit added some information. Does it need to be added to this article?

Ok.. I owe a lot of people, so Im going to start sending out rewards.

Vegas

So this is just a script to automate the setup of one or more masternodes on a server.  I'm not sure what you mean by "setup our own server", do you mean a Masternode pool for LasVegasCoin?

Any masternode or group of nodes has to be hosted on a server somewhere, so for setting up a pool - unless you are personally running an exceptionally beefy machine with a superfast connection, you can't really avoid paying a 3rd party.

Multiple nodes with this script is simply untested by myself.  It should work through IPV6 out of the box, as stated on the script installation text; multiple nodes through IPV4 needs some extra configuration of your VPS.  

Basically when I started with this script I was new to masternodes, using an early Magnet wallet, and couldn't get it working *at the time*.  I got single nodes through IPV4 working, then tried and failed to get IPV6 working for a single node.  Due to having a few nodes to set up very quickly, decided to stick with the known working approach rather than spending any more days fruitlessly messing around with things.

I am a lot more experienced with masternodes now, and in about two weeks I will be setting up my fourth node for two of the coins in my portfolio.  Since it isn't recommended to run more than three nodes per instance and my VPS bill is quite chunky already, I will look at reconfiguring them to use multiple nodes over IPV6 and ensure the instructions for the script covers this case.

[kostepanych2]

Is there win32 version of the new wallet?

Also why on the 1st post of this topic there is still link to v2.0.0.3?
New users will download old wallet...

[cryptonit]

I think Cryptonit was very hard on me. I didnt foresee that the Limxdev wallet would be so difficult to compile in windows. Its NOT a normal windows compile. Im going to keep this short, because people come here for information not drama, @Cryptonit, I dont know why your so aggressive towards me, I have NEVER attacked you in the dmd threads, in fact, I have defended you!!! Agreed this update never went smooth. But all turned out well. If you want a donation, be a little nicer.

Vegas

u could even urself change the triggerblock in source
even i could

asking for donation was a joke
VGS have no financial value its as i stated more a fight against have one red project that i support u

any project i invested was a success just VGS (FLY) was not

and im not accepting that fact

thats the only reason i support this

im known to write and state my opinion in a very direct way
u may call it "very hard" but if it helps u to improve i have no problem play the bad cop

next time if just a simple thing like change a trigger block for a fork is a issue PM me i can easy change that in source
like i guess 10 more people from the community are able too

and please learn how to create releases on github and post the compiled wallets there

[hakeris123]

shall i admit to myself that im screwed on this project very badly? I have bought VGS 5-6$ each and I see there no chance to get up to  1 $ soon,What a nightmare,there is nothing active no fb, no twitter , no website, no telegram no advertisement and so on 

[examplens]

shall i admit to myself that im screwed on this project very badly? I have bought VGS 5-6$ each and I see there no chance to get up to  1 $ soon,What a nightmare,there is nothing active no fb, no twitter , no website, no telegram no advertisement and so on 

I also know people who are buy bitcoin at the price $16k, now they can get up only $7k, ethereum investor also have problem. And so on...

[vella85]

The new wallet seems to be working perfectly for staking at the moment. I am planning on setting up a masternode in the near future on my VPS but first I'll let everything settle down a bit before setting one up. I have also spread the word on Twitter about the new wallet update which people need to update asap so I hope people are listing out there.

[jimmy24651]

Again guys. I admit, I messed this up, and should have moved the fork block for 45,000. Lesson learned. At the end of the day , everything is working. Please understand the reason for the change. .5 VGS to the staker, and .5 vgs to the masternode made no sense whatsoever. I wanted to increase buying pressure through masternodes. Anyway, I shall now move forward with more promotions, the wallet is the way I want it. I will also cleanup the github.

My apologies to everyone.



Vegas

This is where I would like a little clarification if possible.  Yous stated that everything is working, but I am still getting .5 rewards.  Can anyone confirm 2 VGS rewards that fully confirm without turning to orphans...?

After following the wallet repair; recover transactions advice, now I am ONLY showing .5 VGS payouts.  All evidence of 2 VGS payouts have vanished (ie - no more orphans)

I am not wanting to be a pain in the butt, but I would really like to get this thing running correctly ASAP.  The idea of each payout I received today being worth 4 times as much is almost enough to salivate over!