ASICMiner USB group buy- orders closed, pay for extra!

[mdude77]

Hi Arklan,

Now that you've had time to test these suckers, what is your average actual Mh/s?  Just curious.

This is after 18 hours.  Something is funny, I'm not getting Th/s out of them.

Code:

 cgminer version 3.1.1 - Started: [2013-06-01 20:54:28]
-----------------------------------------------------------------------------
 (5s):2.511G (avg):1.695Ph/s | A:8207  R:10  HW:312  U:7.5/m  WU:32.9/m
 ST: 2  SS: 4  NB: 151  LW: 71804  GF: 0  RF: 0
 Connected to 192.168.0.110 diff 4 with stratum as user mdude_proxy
 Block: 0129e9afab477061...  Diff:12.2M  Started: [14:59:42]  Best share: 455
-----------------------------------------------------------------------------
 [P]ool management [S]ettings [D]isplay options [Q]uit
 ICA 0:                | 332.9M/282.6Th/s | A:1238 R:1 HW:41 U: 1.14/m
 ICA 1:                | 334.3M/282.6Th/s | A:1156 R:2 HW:31 U: 1.06/m
 ICA 2:                | 334.7M/282.6Th/s | A:1163 R:2 HW:51 U: 1.07/m
 ICA 3:                | 334.8M/282.6Th/s | A:1166 R:1 HW:57 U: 1.07/m
 ICA 4:                | 323.7M/282.6Th/s | A:1173 R:2 HW:48 U: 1.08/m
 ICA 5:                | 333.9M/334.4Mh/s | A:1154 R:0 HW:44 U: 1.06/m
 ICA 6:                | 334.3M/282.6Th/s | A:1157 R:2 HW:40 U: 1.06/m
-----------------------------------------------------------------------------

 [2013-06-02 15:01:49] ICA2: invalid nonce - HW error
 [2013-06-02 15:01:56] Accepted 10f6b8a2 Diff 15/4 ICA 1 pool 0
 [2013-06-02 15:02:03] Accepted 2edaf5aa Diff 5/4 ICA 1 pool 0
 [2013-06-02 15:02:17] Accepted 0f90f3db Diff 16/4 ICA 2 pool 0
 [2013-06-02 15:02:25] Accepted 24a7ff61 Diff 6/4 ICA 3 pool 0
 [2013-06-02 15:02:25] Accepted 3c6ec226 Diff 4/4 ICA 2 pool 0
 [2013-06-02 15:02:28] Accepted 1b515e9a Diff 9/4 ICA 0 pool 0

M

[arklan]

"I've fallen and I can't get up."  <-- Line from an old, and quite irritating, TV commercial.

Well, that decision got easy.

It stopped hashing again within an hour of being brought back up. It now will not initialize / hash at all. (The other one merrily starts hashing every time I plug it in.)


I've got a bad one, arklan, please ship a replacement.


BTW, I'm happy with it if you ship one you've been using for a while and has a 'known good' status rather than you pulling a cold one from the replacement inventory to send me.

Should I use the return address on the package these came in?
Or do you wish to email an address for me to use in shipping this one back?

And, please cross-ship the replacement. I.e., don't wait to get the bad one before shipping the replacement. (PM me if you want a deposit for that.)

And please send it Express / Next Day delivery. Send me the cost for that and I'll send the BTC to cover that charge.

return address is fine. PM me if you can't read it.

i'll mail a replacement monday.

[LazyOtto]

i'll mail a replacement monday.

Thank you.

Hope your ankle is doing much better.
I hate causing you to get out.

[arklan]

i'll mail a replacement monday.

Thank you.

Hope your ankle is doing much better.
I hate causing you to get out.

i'm about 90% actually. walking on it is good at this point.

[Henchman24]

Hi Arklan,

Now that you've had time to test these suckers, what is your average actual Mh/s?  Just curious.

This is after 18 hours.  Something is funny, I'm not getting Th/s out of them.

Code:

 (5s):2.511G (avg):1.695Ph/s | A:8207  R:10  HW:312  U:7.5/m  WU:32.9/m

Yeah, something isn't right.  Your accepted shares is really low too.

Mine seem to settle in at 334.2MH/s

Code:

 cgminer version 3.1.1 - Started: [2013-06-01 16:26:28]
--------------------------------------------------------------------------------
 (5s):1.047G (avg):1.336Gh/s | A:28781  R:96  HW:281  U:18.5/m  WU:18.8/m
 ST: 2  SS: 0  NB: 224  LW: 61174  GF: 2  RF: 0
 Connected to stratum.btcguild.com diff 1 with stratum as user Henchman24_1
 Block: 00f1dd2d75150151...  Diff:12.2M  Started: [18:10:28]  Best share: 22.6K
--------------------------------------------------------------------------------
 [P]ool management [S]ettings [D]isplay options [Q]uit
 ICA 0:                | 333.3M/334.2Mh/s | A:7208 R:30 HW:62 U:  4.64/m
 ICA 1:                | 333.2M/334.2Mh/s | A:7270 R:24 HW:79 U:  4.68/m
 ICA 2:                | 334.6M/334.2Mh/s | A:7128 R:19 HW:74 U:  4.59/m
 ICA 3:                | 333.7M/334.1Mh/s | A:7175 R:23 HW:66 U:  4.62/m
--------------------------------------------------------------------------------

 [2013-06-02 18:17:00] Accepted 455da15f Diff 3/1 ICA 2 pool 0
 [2013-06-02 18:17:06] Accepted 9e280082 Diff 1/1 ICA 0 pool 0
 [2013-06-02 18:17:12] Accepted 8eeef61b Diff 1/1 ICA 3 pool 0
 [2013-06-02 18:17:14] Accepted c5ef5530 Diff 1/1 ICA 0 pool 0
 [2013-06-02 18:17:15] Accepted a6078fee Diff 1/1 ICA 1 pool 0
 [2013-06-02 18:17:28] Accepted f165e394 Diff 1/1 ICA 3 pool 0
 [2013-06-02 18:17:31] Accepted 3c63948c Diff 4/1 ICA 0 pool 0
 [2013-06-02 18:17:31] Accepted 0cb0b60f Diff 20/1 ICA 0 pool 0
 [2013-06-02 18:17:32] Accepted 71b17d06 Diff 2/1 ICA 1 pool 0
 [2013-06-02 18:17:33] Accepted 88209778 Diff 1/1 ICA 3 pool 0
 [2013-06-02 18:17:35] Accepted 27114a4a Diff 6/1 ICA 3 pool 0
 [2013-06-02 18:17:36] Accepted d767b9c6 Diff 1/1 ICA 1 pool 0
 [2013-06-02 18:17:39] Accepted b1bfe428 Diff 1/1 ICA 1 pool 0
 [2013-06-02 18:17:40] Accepted c43ddc86 Diff 1/1 ICA 0 pool 0
 [2013-06-02 18:17:43] Accepted 471ce2e2 Diff 3/1 ICA 2 pool 0
 [2013-06-02 18:17:50] Accepted 801e4dde Diff 1/1 ICA 0 pool 0
 [2013-06-02 18:17:54] Accepted 203610e5 Diff 7/1 ICA 3 pool 0
 [2013-06-02 18:17:54] Accepted 876b66cd Diff 1/1 ICA 0 pool 0
 [2013-06-02 18:17:58] Accepted e8dceb4d Diff 1/1 ICA 2 pool 0
 [2013-06-02 18:18:04] Accepted 24153ac4 Diff 7/1 ICA 3 pool 0
 [2013-06-02 18:18:07] Accepted 60143158 Diff 2/1 ICA 3 pool 0
 [2013-06-02 18:18:07] Accepted b366d797 Diff 1/1 ICA 1 pool 0
 [2013-06-02 18:18:10] Accepted 9d5f79a5 Diff 1/1 ICA 3 pool 0
 [2013-06-02 18:18:12] Accepted bf08c0e3 Diff 1/1 ICA 3 pool 0
 [2013-06-02 18:18:13] Accepted 062888c6 Diff 41/1 ICA 3 pool 0
 [2013-06-02 18:18:15] Accepted 8e631eff Diff 1/1 ICA 0 pool 0
 [2013-06-02 18:18:15] Accepted 7764665a Diff 2/1 ICA 2 pool 0
 [2013-06-02 18:18:17] Accepted b1cc02a2 Diff 1/1 ICA 0 pool 0
 [2013-06-02 18:18:21] Accepted 49216488 Diff 3/1 ICA 1 pool 0
 [2013-06-02 18:18:21] Accepted 6608398b Diff 2/1 ICA 1 pool 0
 [2013-06-02 18:18:22] Accepted 8dfedc56 Diff 1/1 ICA 0 pool 0
 [2013-06-02 18:18:30] Accepted ca8bb105 Diff 1/1 ICA 2 pool 0

[mdude77]

Hi Arklan,

Now that you've had time to test these suckers, what is your average actual Mh/s?  Just curious.

This is after 18 hours.  Something is funny, I'm not getting Th/s out of them.

Code:

 (5s):2.511G (avg):1.695Ph/s | A:8207  R:10  HW:312  U:7.5/m  WU:32.9/m

Yeah, something isn't right.  Your accepted shares is really low too.

Mine seem to settle in at 334.2MH/s

That's about right.  As for my accepted shares, let me guess, 4+ times as low as they should be?  Note the difficulty 4.  The pool I use has variable diff, but I can't configure it.  So with 4 sets of miners, everything ends up at 1 difficulty.  To reduce my (and pool ops) bandwidth, I run them through the stratum proxy (look at screenshot), which funnels it all to one user on the pool's side.  That kicks up the difficulty to 4, sometimes 8.

M

[Henchman24]

Hi Arklan,

Now that you've had time to test these suckers, what is your average actual Mh/s?  Just curious.

This is after 18 hours.  Something is funny, I'm not getting Th/s out of them.

Code:

 (5s):2.511G (avg):1.695Ph/s | A:8207  R:10  HW:312  U:7.5/m  WU:32.9/m

Yeah, something isn't right.  Your accepted shares is really low too.

Mine seem to settle in at 334.2MH/s

That's about right.  As for my accepted shares, let me guess, 4+ times as low as they should be?  Note the difficulty 4.  The pool I use has variable diff, but I can't configure it.  So with 4 sets of miners, everything ends up at 1 difficulty.  To reduce my (and pool ops) bandwidth, I run them through the stratum proxy (look at screenshot), which funnels it all to one user on the pool's side.  That kicks up the difficulty to 4, sometimes 8.

M

Have you tried connecting to another pool directly?  Simplifying your setup might help you to identify the problem.

[mdude77]

Hi Arklan,

Now that you've had time to test these suckers, what is your average actual Mh/s?  Just curious.

This is after 18 hours.  Something is funny, I'm not getting Th/s out of them.

Code:

 (5s):2.511G (avg):1.695Ph/s | A:8207  R:10  HW:312  U:7.5/m  WU:32.9/m

Yeah, something isn't right.  Your accepted shares is really low too.

Mine seem to settle in at 334.2MH/s

That's about right.  As for my accepted shares, let me guess, 4+ times as low as they should be?  Note the difficulty 4.  The pool I use has variable diff, but I can't configure it.  So with 4 sets of miners, everything ends up at 1 difficulty.  To reduce my (and pool ops) bandwidth, I run them through the stratum proxy (look at screenshot), which funnels it all to one user on the pool's side.  That kicks up the difficulty to 4, sometimes 8.

M

Have you tried connecting to another pool directly?  Simplifying your setup might help you to identify the problem.

Everything seems to be working fine.. just visually it's messed up.  As long as I keep getting paid, I don't care.

M

[daweller]

Hey guys so with these usb devices should I try cgminer 3.2 or is that proven a no-go?

[Xian01]

Hey guys so with these usb devices should I try cgminer 3.2 or is that proven a no-go?

 I've not been able to get 3.2.0 working under Windows yet Still using 3.1.1 with the SiLabs driver.

[kosmokramer]

I have not gotten any version of cgminer to work with my USB erupter. The bitminter client has been working well for me though.

[turtle83]

Got mine today. Apparently theres an issue with using cgminer 3.2.0 with ubuntu. so worked fine after downgrading to 3.1.1. Will try on the pi later...  Boy these run hot.

[aahzmundus]

Got mine today. Apparently theres an issue with using cgminer 3.2.0 with ubuntu. so worked fine after downgrading to 3.1.1. Will try on the pi later...  Boy these run hot.

What group were yours sent out with? mine have yet to arrive -_-

[turtle83]

Got mine today. Apparently theres an issue with using cgminer 3.2.0 with ubuntu. so worked fine after downgrading to 3.1.1. Will try on the pi later...  Boy these run hot.

What group were yours sent out with? mine have yet to arrive -_-

Sent via fedex to Asia.

[Chemicalbro]

Shipped 30/05/13

[turtle83]

-  03/06/2013  -  Monday
11:50   
Delivered
xxxxxxx TH
08:31   
On FedEx vehicle for delivery
BANGKOK TH
07:59   
At local FedEx facility
BANGKOK TH
06:12   
International shipment release - Import
SAMUTPRAKARN TH
05:06   
In transit
SAMUTPRAKARN TH
Package available for clearance
03:35   
At destination sort facility
SAMUTPRAKARN TH
02:17   
Departed FedEx location
GUANGZHOU CN
01:23   
In transit
GUANGZHOU CN
 -  01/06/2013  -  Saturday
18:32   
Arrived at FedEx location
GUANGZHOU CN
 -  31/05/2013  -  Friday
10:53   
Departed FedEx location
ANCHORAGE, AK
07:09   
Arrived at FedEx location
ANCHORAGE, AK
04:07   
Departed FedEx location
MEMPHIS, TN
00:39   
Arrived at FedEx location
MEMPHIS, TN
 -  30/05/2013  -  Thursday
20:58   
At local FedEx facility
SALT LAKE CITY, UT
18:45   
Left FedEx origin facility
OREM, UT
17:46   
Picked up
OREM, UT
Tendered at FedEx Office

[muyuu]

Got mine today. Apparently theres an issue with using cgminer 3.2.0 with ubuntu. so worked fine after downgrading to 3.1.1. Will try on the pi later...  Boy these run hot.

So did I (London, UK).

[CanaryInTheMine]

Shipped 30/05/13

Whaaat??? this is fedex???

[Chemicalbro]

Shipped 30/05/13

Whaaat??? this is fedex???

Fedex International Ground to Canada. Now you can understand why I was annoyed with the muilti-day shipping delays.

[bitcoindaddy]

Are you guys running your cgminer as root? That makes me uncomfortable. I get these messages when run as a normal user:

[2013-06-03 13:44:35] USB init open device failed, err -3, you dont have priviledge to access - AMU device 7:3
[2013-06-03 13:44:35] Icarus detect (7:3) failed to initialise (incorrect device?)

When run with sudo, it acts like it didn't detect the block erupter. Any ideas?