[ANN] New Crypto Currency FRANKO [v0.16][Resurrection]

[bitrain]

FRANCO test p2pool up and running

http://chncoin.no-ip.biz:9222/static/

connect with:

Code:

cgminer --scrypt -o chncoin.no-ip.biz:9222 -u [b]yourCNCaddress[/b] -p 

Have fun

CNCaddress for mining Franco? Sorry, what?

[1715142230]

1715142230

[1715142230]

1715142230

[1715142230]

1715142230

[shakezula]

FRANCO test p2pool up and running

http://chncoin.no-ip.biz:9222/static/

connect with:

Code:

cgminer --scrypt -o chncoin.no-ip.biz:9222 -u yourCNCaddress -p 

Have fun

Nice, that WAS damn fast.

[furuknap]

Only orphans here too, 10 found, 20 rejected, 10 orphans, 0 valid.

And as I hit Post I got my first valid.

I'd sell if but I'll wait for one more to give half a FAC.

.b

[TheSwede75]

FRANCO test p2pool up and running

http://chncoin.no-ip.biz:9222/static/

connect with:

Code:

cgminer --scrypt -o chncoin.no-ip.biz:9222 -u [b]yourCNCaddress[/b] -p 

Have fun

CNCaddress for mining Franco? Sorry, what?

He obviously copy-pasted his scrypt server code fast enough that he just didn't care to change anything but the main code.

[mc_lovin]

FRANCO test p2pool up and running

http://chncoin.no-ip.biz:9222/static/

connect with:

Code:

cgminer --scrypt -o chncoin.no-ip.biz:9222 -u [b]yourCNCaddress[/b] -p 

Have fun

CNCaddress for mining Franco? Sorry, what?

Looks like new altcoins are coming out faster than he can change the subdomain name.  I connected, seems legit.

[Narken]

FRANCO test p2pool up and running

http://chncoin.no-ip.biz:9222/static/

connect with:

Code:

cgminer --scrypt -o chncoin.no-ip.biz:9222 -u yourCNCaddress -p 

Have fun

And its down.

That was even faster 

Test pool, need to adjust the shares and reward since it's 0.25

Aka test pool. up again through

[sidelsky18]

I made the conf file, but when I run frankod.exe it just opens a blank command prompt that just sits there.

that's the daemon.  you need to open the QT window. 

You mean the mining in the wallet?

You have your wallet open, then you can point miners to it. 

Like you have cgminer open on that same computer, then point it to 127.0.0.01:<port>, then it'll solo, if you hit a block it shows up in the wallet. 

If you have other IPs open in your conf, you can connect from other machines and point them towards the ip/port on your computer w/the wallet.

Okay, so I added a new pool with url 127.0.0.01:7913 and user frankorpc and a pass of some random characters, but I'm getting "Failed to resolve (?wrong URL) 127.0.0.01:7913"

127.0.0.01 --- remove the 0.. so.. 127.0.0.1

for others...

rpcuser=myusername
rpcpassword=mypassword
rpcallowip=127.0.0.1
rpcallowip=192.168.0.*
rpcport=9898
port=7912
daemon=1
server=1
gen=0

point your miners to port 9898
make sure server switch and daemon are 1..

How do I get cgminer to run the franko.conf file rather than the cgminer.conf file?

[Narken]

FRANCO test p2pool up and running

http://chncoin.no-ip.biz:9222/static/

connect with:

Code:

cgminer --scrypt -o chncoin.no-ip.biz:9222 -u [b]yourCNCaddress[/b] -p 

Have fun

CNCaddress for mining Franco? Sorry, what?

He obviously copy-pasted his scrypt server code fast enough that he just didn't care to change anything but the main code.

True, I'm the owner of

https://bitcointalk.org/index.php?topic=198175

https://github.com/narken/p2pool-altcoins

[cryptohunter]

FRANCO test p2pool up and running

http://chncoin.no-ip.biz:9222/static/

connect with:

Code:

cgminer --scrypt -o chncoin.no-ip.biz:9222 -u yourCNCaddress -p 

Have fun

And its down.

That was even faster 

Test pool, need to adjust the shares and reward since it's 0.25

Aka test pool. up again through

is 100% rejection rate something i should be seeing in cgminer?

[skyangel]

How do I get cgminer to run the franko.conf file rather than the cgminer.conf file?

you don't. cgminer users cgminer.conf, franko-qt uses franko.conf

[TheSwede75]

FRANCO test p2pool up and running

http://chncoin.no-ip.biz:9222/static/

connect with:

Code:

cgminer --scrypt -o chncoin.no-ip.biz:9222 -u yourCNCaddress -p 

Have fun

And its down.

That was even faster 

Test pool, need to adjust the shares and reward since it's 0.25

Aka test pool. up again through

is 100% rejection rate something i should be seeing in cgminer?

Damn, I haven't seen 100% rejection rate since I stopped trying to date *zing*

[clip]

diff is probably way to low for pooled mining.

[mc_lovin]

I made the conf file, but when I run frankod.exe it just opens a blank command prompt that just sits there.

that's the daemon.  you need to open the QT window. 

You mean the mining in the wallet?

You have your wallet open, then you can point miners to it. 

Like you have cgminer open on that same computer, then point it to 127.0.0.01:<port>, then it'll solo, if you hit a block it shows up in the wallet. 

If you have other IPs open in your conf, you can connect from other machines and point them towards the ip/port on your computer w/the wallet.

Okay, so I added a new pool with url 127.0.0.01:7913 and user frankorpc and a pass of some random characters, but I'm getting "Failed to resolve (?wrong URL) 127.0.0.01:7913"

127.0.0.01 --- remove the 0.. so.. 127.0.0.1

for others...

rpcuser=myusername
rpcpassword=mypassword
rpcallowip=127.0.0.1
rpcallowip=192.168.0.*
rpcport=9898
port=7912
daemon=1
server=1
gen=0

point your miners to port 9898
make sure server switch and daemon are 1..

How do I get cgminer to run the franko.conf file rather than the cgminer.conf file?

franko.conf is to be in your %appdata%/franko folder, when  you open the franko-qt, it will use this for its's settings.

then cgminer uses cgminer.conf to mine, and it connects to the credentials you set in your franko.conf file.  you need'm both.

[cryptohunter]

FRANCO test p2pool up and running

http://chncoin.no-ip.biz:9222/static/

connect with:

Code:

cgminer --scrypt -o chncoin.no-ip.biz:9222 -u yourCNCaddress -p 

Have fun

And its down.

That was even faster 

Test pool, need to adjust the shares and reward since it's 0.25

Aka test pool. up again through

is 100% rejection rate something i should be seeing in cgminer?

Damn, I haven't seen 100% rejection rate since I stopped trying to date *zing*

lol thats a no then, ...i must have done something wrong let me double check it all

[Magic8Ball]

How to set up for CPUminer?

[snailbrain]

I made the conf file, but when I run frankod.exe it just opens a blank command prompt that just sits there.

that's the daemon.  you need to open the QT window. 

You mean the mining in the wallet?

You have your wallet open, then you can point miners to it. 

Like you have cgminer open on that same computer, then point it to 127.0.0.01:<port>, then it'll solo, if you hit a block it shows up in the wallet. 

If you have other IPs open in your conf, you can connect from other machines and point them towards the ip/port on your computer w/the wallet.

Okay, so I added a new pool with url 127.0.0.01:7913 and user frankorpc and a pass of some random characters, but I'm getting "Failed to resolve (?wrong URL) 127.0.0.01:7913"

127.0.0.01 --- remove the 0.. so.. 127.0.0.1

for others...

rpcuser=myusername
rpcpassword=mypassword
rpcallowip=127.0.0.1
rpcallowip=192.168.0.*
rpcport=9898
port=7912
daemon=1
server=1
gen=0

point your miners to port 9898
make sure server switch and daemon are 1..

How do I get cgminer to run the franko.conf file rather than the cgminer.conf file?

u put the conf file in the appdata franko directory..
then you run the application/Gui

then you are ready to go, you can point your miners to it .. or use cpu mining.. or both
in cgiminer just put in your local ip or 127.0.0.1 .. the port 9898 if you used that conf file.. the username and password that you set.. and any settings you normally use.. (just guessing, haven't mined properly for a couple of years, don't have the hardware now.. nvidia )

[mc_lovin]

I'm still waiting for Ass Pennies to be released..

https://github.com/keninishna/ass-pennies

[mkmen]

Damn, I haven't seen 100% rejection rate since I stopped trying to date *zing*

good one, I'm still getting some

[sidelsky18]

How do I get cgminer to run the franko.conf file rather than the cgminer.conf file?

you don't. cgminer users cgminer.conf, franko-qt uses franko.conf

I'm so confused.

Someone said to use

rpcuser=username
rpcpassword=password
rpcallowip=127.0.0.1
rpcallowip=192.168.0.*
rpcport=9898
port=7912
daemon=1
server=1
gen=0
addnode=8.8.8.8
addnode=8.8.4.4
addnode=77.101.119.112
addnode=174.50.248.2
addnode=76.115.8.101

Is that for cgminer or franko-qt?

[cryptohunter]

where is blastbobs pool ? should be out soon?