[ANN][TZC] TrezarCoin Super-Secure-PoW/PoS

[ItsCrafty]

Whats the difficulty right now? Is it worth solo mining?

[makomako]

my coins are 2 days old and still not staking what am I doing wrong??

create a conf file at your wallet with these settings

irc=1
dns=1
qtstyle=2
daemon=1
server=1
stakegen=1
logtimestamps=1
minersleep=2000
stakemintime=24
stakecombine=200
stakesplit=400
port=15298
rpcport=15299
rpcuser=username
rpcpassword=password

thank it change to green now.

but right corner bottom  say staking pause

maybe your coins are not yet matured yet, just wait for it.

[temple]

Whats the difficulty right now? Is it worth solo mining?

I don't think so. If there is a pool I think you are better off.

[sigtmerchant]

it works fine if you leave it on default. Gonna publish a guide later on for insight depth, but its not necessary to be able to stake.

I wrote all into the Mainpost which is needed to be able to mine and to stake correctly.

Wow I bet lots and lots of folks would appreciate such a post!

[nizzuu]

Is it worth solo mining?

No. For now, you can solo mine only if you got 20Mh+, then you may find a block in an hour, or less. Or you may not

[abudfv2008]

His config-file is the one from the Mainpost I guess, shouldnt differ a lot

May be you can make first post selfexplanatory about staking?
Or at least answer some questions?
1) Why this conf is not created automatically? User would have no problems. I don't remember wallets that need to add all config file manually.
2) Only one option "Stakemintime" is understandable. But whats the difference between 24 and 72. Or simpler what do i benefit from 72/48 instead of 24?
3) What stakecombine and stakesplit and stakemindepth mean?
4) I get now a message "Staking is Enabled. 10 inputs. 180coindays" And second string also. And what does it mean? How these 180 correspond to coins in my wallet ... Five minutes later it shows 200coindays. What does it mean?
The coins are in the wallet for 2 days. But no staking.

5) It is written
" -stakemindepth=<n>     Set the min. stake input block chain depth in confirmations (default: follow -stakeminage)"
But there is no stakeminage. I think you mean "Stakemintime". But for what do you need second parameter if it is the same? Or if I put it different - what's the point of that? What will change?

it works fine if you leave it on default. Gonna publish a guide later on for insight depth, but its not necessary to be able to stake.

I wrote all into the Mainpost which is needed to be able to mine and to stake correctly.

Ok. My first 2 transaction to wallet happened
04.09.2017 23:23 2.813989
05.09.2017 01:23 63.796141
So now it is more than 24hours. I put your conf several hours ago and still no stacking.

[ChekaZ]

His config-file is the one from the Mainpost I guess, shouldnt differ a lot

May be you can make first post selfexplanatory about staking?
Or at least answer some questions?
1) Why this conf is not created automatically? User would have no problems. I don't remember wallets that need to add all config file manually.
2) Only one option "Stakemintime" is understandable. But whats the difference between 24 and 72. Or simpler what do i benefit from 72/48 instead of 24?
3) What stakecombine and stakesplit and stakemindepth mean?
4) I get now a message "Staking is Enabled. 10 inputs. 180coindays" And second string also. And what does it mean? How these 180 correspond to coins in my wallet ... Five minutes later it shows 200coindays. What does it mean?
The coins are in the wallet for 2 days. But no staking.

5) It is written
" -stakemindepth=<n>     Set the min. stake input block chain depth in confirmations (default: follow -stakeminage)"
But there is no stakeminage. I think you mean "Stakemintime". But for what do you need second parameter if it is the same? Or if I put it different - what's the point of that? What will change?

it works fine if you leave it on default. Gonna publish a guide later on for insight depth, but its not necessary to be able to stake.

I wrote all into the Mainpost which is needed to be able to mine and to stake correctly.

Ok. My first 2 transaction to wallet happened
04.09.2017 23:23 2.813989
05.09.2017 01:23 63.796141
So now it is more than 24hours. I put your conf several hours ago and still no stacking.

Is your config working correctly, did you see the color-change?

[Dennoo]

How can to stake? Here is my config, but i don't know how can it work, sorry for my newbie in POS. Thanks!

https://i.imgur.com/PUexLtR.png

this is how it looks when stake works if you used the settings dev provided wait few hours.
https://image.ibb.co/dZSJjF/tzcss.jpg

is there a reason these wallets are green around on the side?
my wallet is whole grey.

is it correct that i put the config into the "data" folder for the stake?

Its green cause of the qtstyle=2 in the .conf file.

if yours is not green, your config doesnt work. Make sure its a .conf file not .conf.txt and its called Trezarcoin.conf

His config-file is the one from the Mainpost I guess, shouldnt differ a lot

May be you can make first post selfexplanatory about staking?
Or at least answer some questions?
1) Why this conf is not created automatically? User would have no problems. I don't remember wallets that need to add all config file manually.
2) Only one option "Stakemintime" is understandable. But whats the difference between 24 and 72. Or simpler what do i benefit from 72/48 instead of 24?
3) What stakecombine and stakesplit and stakemindepth mean?
4) I get now a message "Staking is Enabled. 10 inputs. 180coindays" And second string also. And what does it mean? How these 180 correspond to coins in my wallet ... Five minutes later it shows 200coindays. What does it mean?
The coins are in the wallet for 2 days. But no staking.

5) It is written
" -stakemindepth=<n>     Set the min. stake input block chain depth in confirmations (default: follow -stakeminage)"
But there is no stakeminage. I think you mean "Stakemintime". But for what do you need second parameter if it is the same? Or if I put it different - what's the point of that? What will change?

it works fine if you leave it on default. Gonna publish a guide later on for insight depth, but its not necessary to be able to stake.

I wrote all into the Mainpost which is needed to be able to mine and to stake correctly.

ok while creating the conf file i accidently changed the coding type of the file, thats why it didnt work. now im good! thx

[JohnnyR20]

His config-file is the one from the Mainpost I guess, shouldnt differ a lot

May be you can make first post selfexplanatory about staking?
Or at least answer some questions?
1) Why this conf is not created automatically? User would have no problems. I don't remember wallets that need to add all config file manually.
2) Only one option "Stakemintime" is understandable. But whats the difference between 24 and 72. Or simpler what do i benefit from 72/48 instead of 24?
3) What stakecombine and stakesplit and stakemindepth mean?
4) I get now a message "Staking is Enabled. 10 inputs. 180coindays" And second string also. And what does it mean? How these 180 correspond to coins in my wallet ... Five minutes later it shows 200coindays. What does it mean?
The coins are in the wallet for 2 days. But no staking.

5) It is written
" -stakemindepth=<n>     Set the min. stake input block chain depth in confirmations (default: follow -stakeminage)"
But there is no stakeminage. I think you mean "Stakemintime". But for what do you need second parameter if it is the same? Or if I put it different - what's the point of that? What will change?

it works fine if you leave it on default. Gonna publish a guide later on for insight depth, but its not necessary to be able to stake.

I wrote all into the Mainpost which is needed to be able to mine and to stake correctly.

Ok. My first 2 transaction to wallet happened
04.09.2017 23:23 2.813989
05.09.2017 01:23 63.796141
So now it is more than 24hours. I put your conf several hours ago and still no stacking.

Is your config working correctly, did you see the color-change?

I put this to conf file in data folder:

irc=1
dns=1
qtstyle=2
daemon=1
server=1
stakegen=1
logtimestamps=1
minersleep=2000
stakemindepth=1000
stakemintime=72
stakecombine=40
stakesplit=80
port=15298
rpcport=15299
rpcuser=username
rpcpassword=password

wallet green now.
I do all ok, or i miss something?

[Vegan97]

His config-file is the one from the Mainpost I guess, shouldnt differ a lot

May be you can make first post selfexplanatory about staking?
Or at least answer some questions?
1) Why this conf is not created automatically? User would have no problems. I don't remember wallets that need to add all config file manually.
2) Only one option "Stakemintime" is understandable. But whats the difference between 24 and 72. Or simpler what do i benefit from 72/48 instead of 24?
3) What stakecombine and stakesplit and stakemindepth mean?
4) I get now a message "Staking is Enabled. 10 inputs. 180coindays" And second string also. And what does it mean? How these 180 correspond to coins in my wallet ... Five minutes later it shows 200coindays. What does it mean?
The coins are in the wallet for 2 days. But no staking.

5) It is written
" -stakemindepth=<n>     Set the min. stake input block chain depth in confirmations (default: follow -stakeminage)"
But there is no stakeminage. I think you mean "Stakemintime". But for what do you need second parameter if it is the same? Or if I put it different - what's the point of that? What will change?

it works fine if you leave it on default. Gonna publish a guide later on for insight depth, but its not necessary to be able to stake.

I wrote all into the Mainpost which is needed to be able to mine and to stake correctly.

Ok. My first 2 transaction to wallet happened
04.09.2017 23:23 2.813989
05.09.2017 01:23 63.796141
So now it is more than 24hours. I put your conf several hours ago and still no stacking.

Is your config working correctly, did you see the color-change?

I put this to conf file in data folder:

irc=1
dns=1
qtstyle=2
daemon=1
server=1
stakegen=1
logtimestamps=1
minersleep=2000
stakemindepth=1000
stakemintime=72
stakecombine=40
stakesplit=80
port=15298
rpcport=15299
rpcuser=username
rpcpassword=password

wallet green now.
I do all ok, or i miss something?

Can somebody explain what these settings mean in the config file?

[DashS]

Oops I missed a nice PoW project.

"marketing fund" is a very nice for premine 

[makomako]

His config-file is the one from the Mainpost I guess, shouldnt differ a lot

May be you can make first post selfexplanatory about staking?
Or at least answer some questions?
1) Why this conf is not created automatically? User would have no problems. I don't remember wallets that need to add all config file manually.
2) Only one option "Stakemintime" is understandable. But whats the difference between 24 and 72. Or simpler what do i benefit from 72/48 instead of 24?
3) What stakecombine and stakesplit and stakemindepth mean?
4) I get now a message "Staking is Enabled. 10 inputs. 180coindays" And second string also. And what does it mean? How these 180 correspond to coins in my wallet ... Five minutes later it shows 200coindays. What does it mean?
The coins are in the wallet for 2 days. But no staking.

5) It is written
" -stakemindepth=<n>     Set the min. stake input block chain depth in confirmations (default: follow -stakeminage)"
But there is no stakeminage. I think you mean "Stakemintime". But for what do you need second parameter if it is the same? Or if I put it different - what's the point of that? What will change?

it works fine if you leave it on default. Gonna publish a guide later on for insight depth, but its not necessary to be able to stake.

I wrote all into the Mainpost which is needed to be able to mine and to stake correctly.

Ok. My first 2 transaction to wallet happened
04.09.2017 23:23 2.813989
05.09.2017 01:23 63.796141
So now it is more than 24hours. I put your conf several hours ago and still no stacking.

Is your config working correctly, did you see the color-change?

I put this to conf file in data folder:

irc=1
dns=1
qtstyle=2
daemon=1
server=1
stakegen=1
logtimestamps=1
minersleep=2000
stakemindepth=1000
stakemintime=72
stakecombine=40
stakesplit=80
port=15298
rpcport=15299
rpcuser=username
rpcpassword=password

wallet green now.
I do all ok, or i miss something?

nah you're good, just make sure that it says staking at the lower right icon it has something like inputs coins xx days.
if its not then you have to wait for your coins to  mature first then your good to go.

[Dennoo]

nah you're good, just make sure that it says staking at the lower right icon it has something like inputs coins xx days.
if its not then you have to wait for your coins to  mature first then your good to go.

i have the same, it says staking paused.
it shows my coins under balance, not under immature. do i have still have to wait?

[abudfv2008]

His config-file is the one from the Mainpost I guess, shouldnt differ a lot

May be you can make first post selfexplanatory about staking?
Or at least answer some questions?
1) Why this conf is not created automatically? User would have no problems. I don't remember wallets that need to add all config file manually.
2) Only one option "Stakemintime" is understandable. But whats the difference between 24 and 72. Or simpler what do i benefit from 72/48 instead of 24?
3) What stakecombine and stakesplit and stakemindepth mean?
4) I get now a message "Staking is Enabled. 10 inputs. 180coindays" And second string also. And what does it mean? How these 180 correspond to coins in my wallet ... Five minutes later it shows 200coindays. What does it mean?
The coins are in the wallet for 2 days. But no staking.

5) It is written
" -stakemindepth=<n>     Set the min. stake input block chain depth in confirmations (default: follow -stakeminage)"
But there is no stakeminage. I think you mean "Stakemintime". But for what do you need second parameter if it is the same? Or if I put it different - what's the point of that? What will change?

it works fine if you leave it on default. Gonna publish a guide later on for insight depth, but its not necessary to be able to stake.

I wrote all into the Mainpost which is needed to be able to mine and to stake correctly.

Ok. My first 2 transaction to wallet happened
04.09.2017 23:23 2.813989
05.09.2017 01:23 63.796141
So now it is more than 24hours. I put your conf several hours ago and still no stacking.

Is your config working correctly, did you see the color-change?

I think it is correct color. Previously there were 0 in second line. Now 12minutes. But I've put conf file at least 3 hour ago.

[ghostlander]

i put config in datafolder

stakemintime=24
stakecombine=200
stakesplit=400


and why my wallet not green like u guy  i miss something?

The default Qt style is 1 with a gray vertical bar. qtstyle=2 is the same with a green vertical bar. qtstyle=0 is very much like the reference Bitcoin wallet. If you have any questions, look at the Orbitcoin forum thread first. This coin is a fork of ORB.

[medveworld]

comrades and how to solo mine that? )

[Dennoo]

so the config is running correctly now, but it still says no mature coins staking paused.

but i have no immature coins, where is the mistake?

[ChekaZ]

so the config is running correctly now, but it still says no mature coins staking paused.

but i have no immature coins, where is the mistake?

You need to have the coins in your wallet for at least 24h and your wallet needs to be unlocked.

comrades and how to solo mine that? )

I wouldnt recommend it, nethashrate is pretty high.

[abudfv2008]

so the config is running correctly now, but it still says no mature coins staking paused.

but i have no immature coins, where is the mistake?

You need to have the coins in your wallet for at least 24h and your wallet needs to be unlocked.

Excuse me. But I have coins in my wallet for 48h already. The wallet is running, it is not encrypted or locked.
What I'm doing wrong?
It still shows 12minutes of minage as in the previous post.

[Garicc]

so the config is running correctly now, but it still says no mature coins staking paused.

but i have no immature coins, where is the mistake?

You need to have the coins in your wallet for at least 24h and your wallet needs to be unlocked.

comrades and how to solo mine that? )

I wouldnt recommend it, nethashrate is pretty high.

What means "and your wallet needs to be unlocked"?