[ANN][TZC] TrezarCoin Super-Secure-PoW/PoS

[abudfv2008]

ChekaZ
Will you give any answer to the questions about staking?
Or these questions are in the ignore list?

[1714902842]

1714902842

[1714902842]

1714902842

[1714902842]

1714902842

[1714902842]

1714902842

[ishem]

my wallet crashed just as it was about to find POS block...

Now my AV flags it as a virus... malwaregen32. My AV shuts down the program because it's trying to run illegal commands on my pc.

You cant know that its about to find a PoS block, and it doesnt matter cause you can just restart it again and it doesnt loose any coindays.

AV always flags miner/wallets as malware, whitelist it.

Well my other wallets don't get flagged by AV.

Until now trezarqt was also not flagged... I started it up and shut it down dozens of times - my AV was quiet, but after it crashed a couple of hours ago, I tried to run it again and my AV flagged it and erased it from the system. I don't know if it's related to the crash or not... perhaps the program suddenly started acting differently than before.

[ChekaZ]

ChekaZ
Will you give any answer to the questions about staking?
Or these questions are in the ignore list?

Whats your question, everything got explained dozens of times how to stake, many people were able to get it running

[abudfv2008]

iam received 700 TZC , i hope dev have strategi to building and grow this coin , i think its interesting to all people in world
i hope can coming a big exchange cryptopia and yobit soon ,
thanks for coin.

Your more than welcome to trade Trezarcoin on Bitzure in the meantime

https://bitzure.com/markets/tzcbtc

can you stop spam with your shitty exchange?

Your entitled to your opinion, just letting everyone know that they can trade there. As many traders currently trading Magnatum and Signatum at Bitzure at the moment

I think that he don't want trust his assets to persons with
William Borcoski https://www.google.ru/search?q=William+Borcoski&newwindow=1&safe=off&tbm=isch&tbo=u&source=univ&sa=X&ved=0ahUKEwifsdGS7JLWAhWLWxQKHRSqCz4QsAQIQw
Martin Prue https://www.google.ru/search?q=Martin+Prue&newwindow=1&safe=off&tbm=isch&tbo=u&source=univ&sa=X&ved=0ahUKEwj5tuWa7JLWAhWCVRoKHZm2BCEQsAQIJg&biw=1280&bih=918
nicknames.
Who are you people? Another thieves?

[cattani30]

I have 2200 confirmations right now and more then 48 hours have passed. But i can still see the message staking is paused , no mature coins found.
As an update, my wallet also crashed unexpectedly

[ChekaZ]

I have 2200 confirmations right now and more then 48 hours have passed. But i can still see the message staking is paused , no mature coins found.
As an update, my wallet also crashed unexpectedly

Did you set your .conf file properly?

[abudfv2008]

ChekaZ
Will you give any answer to the questions about staking?
Or these questions are in the ignore list?

Whats your question, everything got explained dozens of times how to stake, many people were able to get it running

Ok I can repeat once again. The "documentation" says

Staking options:
 -stakegen=<n>          Generate coin stakes (default: 1 = enabled)
 -stakemintime=<n>      Set the min. stake input block chain time in hours (default: 48 or testnet: 1)
 -stakemindepth=<n>     Set the min. stake input block chain depth in confirmations (default: follow -stakeminage)
 -stakeminvalue=<n>     Set the min. stake input value in coins (default: 1.0)
 -stakecombine=<n>      Try to combine inputs while staking up to this limit in coins (20 < n < 200; default: 20)

So. Questions
1)  -stakemintime=<n>. Whats the difference between 24/48/72/... in terms of profit?
2)  -stakemindepth=<n>. What is it? Whats the difference if not "follow"
3) -stakeminvalue=<n> Why not 0.01 or 100? Whats the difference?
4) -stakecombine=<n> Whats the difference between 20 .... 200?
5) What means "XXX coindays, 12minage,0avg age,0 max age"? I had these numbers yesterday, I have them now. Only XXX coin days change.


P.S. And yes it is running. But do you think it is abnormal to understand the process?

[ChekaZ]

ChekaZ
Will you give any answer to the questions about staking?
Or these questions are in the ignore list?

Whats your question, everything got explained dozens of times how to stake, many people were able to get it running

Ok I can repeat once again. The "documentation" says

Staking options:
 -stakegen=<n>          Generate coin stakes (default: 1 = enabled)
 -stakemintime=<n>      Set the min. stake input block chain time in hours (default: 48 or testnet: 1)
 -stakemindepth=<n>     Set the min. stake input block chain depth in confirmations (default: follow -stakeminage)
 -stakeminvalue=<n>     Set the min. stake input value in coins (default: 1.0)
 -stakecombine=<n>      Try to combine inputs while staking up to this limit in coins (20 < n < 200; default: 20)

So. Questions
1)  -stakemintime=<n>. Whats the difference between 24/48/72/... in terms of profit?
2)  -stakemindepth=<n>. What is it? Whats the difference if not "follow"
3) -stakeminvalue=<n> Why not 0.01 or 100? Whats the difference?
4) -stakecombine=<n> Whats the difference between 20 .... 200?
5) What means "XXX coindays, 12minage,0avg age,0 max age"? I had these numbers yesterday, I have them now. Only XXX coin days change.


P.S. And yes it is running. But do you think it is abnormal to understand the process?

Ive posted a standard config with which you are completely good to go, which is working. Coindays/coinweight is your "power" to stake. stakecombine is combining your addresses with low coins to one that is able to stake at the minimum rate, stakemindepth is for min confirmations on your coins.

Gonna explain it more detailed on the FAQ which is beeing prepared.

You dont actually need to understand this, that is why an example config got posted with which you are ready to go.

[JohnnyR20]

ChekaZ
Will you give any answer to the questions about staking?
Or these questions are in the ignore list?

Whats your question, everything got explained dozens of times how to stake, many people were able to get it running

Ok I can repeat once again. The "documentation" says

Staking options:
 -stakegen=<n>          Generate coin stakes (default: 1 = enabled)
 -stakemintime=<n>      Set the min. stake input block chain time in hours (default: 48 or testnet: 1)
 -stakemindepth=<n>     Set the min. stake input block chain depth in confirmations (default: follow -stakeminage)
 -stakeminvalue=<n>     Set the min. stake input value in coins (default: 1.0)
 -stakecombine=<n>      Try to combine inputs while staking up to this limit in coins (20 < n < 200; default: 20)

So. Questions
1)  -stakemintime=<n>. Whats the difference between 24/48/72/... in terms of profit?
2)  -stakemindepth=<n>. What is it? Whats the difference if not "follow"
3) -stakeminvalue=<n> Why not 0.01 or 100? Whats the difference?
4) -stakecombine=<n> Whats the difference between 20 .... 200?
5) What means "XXX coindays, 12minage,0avg age,0 max age"? I had these numbers yesterday, I have them now. Only XXX coin days change.
https://image.ibb.co/cesePF/123.jpg

P.S. And yes it is running. But do you think it is abnormal to understand the process?

Ive posted a standard config with which you are completely good to go, which is working. Coindays/coinweight is your "power" to stake. stakecombine is combining your addresses with low coins to one that is able to stake at the minimum rate, stakemindepth is for min confirmations on your coins.

Gonna explain it more detailed on the FAQ which is beeing prepared.

You dont actually need to understand this, that is why an example config got posted with which you are ready to go.

what about nodes? Are they need to be adding in config file?

-
Aslo TZC back to altminer.net again

[divedaucd]

Hello ChekaZ, can you let me know how long stake begin? I open wallet almost 20 hours but still stake pause.  I'm so sad

[ChekaZ]

Hello ChekaZ, can you let me know how long stake begin? I open wallet almost 20 hours but still stake pause.  I'm so sad

https://i.imgur.com/Thx2EEz.png

add stakemindepth=1000

and you need to have your coins at least 24h in your wallet.

[divedaucd]

add stakemindepth=1000

and you need to have your coins at least 24h in your wallet.

Thank you so much, great dev. 

[ishem]

To work around the AV issue, I am now running my wallet in virtual machine. But it's true it shows 242 coin days, so maybe I'll get POS block soon.

[abudfv2008]

ChekaZ
Will you give any answer to the questions about staking?
Or these questions are in the ignore list?

Whats your question, everything got explained dozens of times how to stake, many people were able to get it running

Ok I can repeat once again. The "documentation" says

Staking options:
 -stakegen=<n>          Generate coin stakes (default: 1 = enabled)
 -stakemintime=<n>      Set the min. stake input block chain time in hours (default: 48 or testnet: 1)
 -stakemindepth=<n>     Set the min. stake input block chain depth in confirmations (default: follow -stakeminage)
 -stakeminvalue=<n>     Set the min. stake input value in coins (default: 1.0)
 -stakecombine=<n>      Try to combine inputs while staking up to this limit in coins (20 < n < 200; default: 20)

So. Questions
1)  -stakemintime=<n>. Whats the difference between 24/48/72/... in terms of profit?
2)  -stakemindepth=<n>. What is it? Whats the difference if not "follow"
3) -stakeminvalue=<n> Why not 0.01 or 100? Whats the difference?
4) -stakecombine=<n> Whats the difference between 20 .... 200?
5) What means "XXX coindays, 12minage,0avg age,0 max age"? I had these numbers yesterday, I have them now. Only XXX coin days change.


P.S. And yes it is running. But do you think it is abnormal to understand the process?

Ive posted a standard config with which you are completely good to go, which is working. Coindays/coinweight is your "power" to stake. stakecombine is combining your addresses with low coins to one that is able to stake at the minimum rate, stakemindepth is for min confirmations on your coins.

Gonna explain it more detailed on the FAQ which is beeing prepared.

You dont actually need to understand this, that is why an example config got posted with which you are ready to go.

You know there are people who don't need to understand anything - they get 500h/s from 1060 and are happy, making 2 coins a day.
There are others that try to get more.
So if you have settings it is obvious that someone like me will ask WTF they mean. Other wallets just have default values and nobody ask questions.
I think these settings should influence something, or for what do they exist. Especially intrest is profit so what is wrong that I'm trying to get an answer?
You still gave NO answer.

1) "Coindays/coinweight is your "power" to stake.". Ok, why I have 200-300coin days? Why did it lowered when I got first stake? How it is calculated?
2) "stakecombine is combining your addresses with low coins to one that is able to stake at the minimum rate". Understandable, but whats the difference between 20 and 200? Why not simply to combine everything in a wallet?
3) "stakemindepth is for min confirmations on your coins" If I set it 0 ... what will happen?

And you still didn't answer about 24/48/72. What's the difference? More "power"? If so - what's the formula?

P.S. Couple of hours ago I had some coins in the "Deposit" line. After wallet crash there is nothing. All coins are on "Balance" line.
Staking is enabled, still 12minage, and 375coindays. What doest it mean?

[ishem]

Yeah basically we need detailed explanation of all staking parameters so we can tweak and turn our set up as we please to maximize our profits... that's why a very detailed explanation of every parameter and how they interact with each other/the network and the amount of coins you have is definitely needed here.

[cattani30]

I have 2200 confirmations right now and more then 48 hours have passed. But i can still see the message staking is paused , no mature coins found.
As an update, my wallet also crashed unexpectedly

Did you set your .conf file properly?

I made a typing mistake on my .conf file name and thats why the staking couldnt start. Now it started

[Ryuh]

Dev said that will write a FAQ about staking, so give him some time now.
Ishem, this time wait more than 12 minutes if you can, please? 

[abudfv2008]

Dev said that will write a FAQ about staking, so give him some time now.
Ishem, this time wait more than 12 minutes if you can, please?  

Yes of course. But we are asking the same questions from yesterday.
And I'm also trying to remind dev all questions, that they need to be explained thoughly. But he still avoid/forget to answer some of them.

[Ryuh]

Ok, ill answer this way.

Bitcoin is the first crypto ever right? Yes!
Is it user friendly? No!
Does it have technical problems as of now, even its the most popular? Yes!

Does Ethereum have technical problems? Yes!
Is it user friendly? No!

Do you see where i'm going with this?

[cryptodunno]

also new here
Does anyone mine on GTX 1060?
cannot find any sensible calculator for neoscrypt so wondering if 500 kh/s is okay with ccminer?

seems 500 kh/s is reasonable ..I see little diff. avg 600kh/s on GTX 1060

finally got some time for testings and got my 4x1060 to 750-800 kh/s each with ccminer64