obm_dan
Member
 Offline
Activity: 112
Merit: 13
|
 |
August 04, 2018, 02:15:53 PM |
|
Hello! I'd love to add support for Baikal miners to the miner monitoring project that I'm working on. Unfortunately, I don't have a Baikal miner to test with. Is there any way that I could get somebody to run the following commands and PM me the output? I'd love you forever.  echo '{"command":"stats"}' | netcat <baikal_ip_here> 4028
echo '{"command":"pools"}' | netcat <baikal_ip_here> 4028
echo '{"command":"devs"}' | netcat <baikal_ip_here> 4028
|
|
|
|
|
|
|
|
|
|
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
yrk1957
Member
Offline
Activity: 529
Merit: 29
|
|
August 04, 2018, 03:57:55 PM |
|
Hello! I'd love to add support for Baikal miners to the miner monitoring project that I'm working on. Unfortunately, I don't have a Baikal miner to test with. Is there any way that I could get somebody to run the following commands and PM me the output? I'd love you forever. echo '{"command":"stats"}' | netcat <baikal_ip_here> 4028
echo '{"command":"pools"}' | netcat <baikal_ip_here> 4028
echo '{"command":"devs"}' | netcat <baikal_ip_here> 4028
I believe this is what you want: API command: devs
{
"STATUS": [
{
"STATUS": "S",
"When": 1533397884,
"Code": 9,
"Msg": "3 GPU(s)",
"Description": "sgminer 5.6.6-l"
}
],
"DEVS": [
{
"ASC": 0,
"Name": "BKLU",
"ID": 0,
"Enabled": "Y",
"Status": "Alive",
"Temperature": 47.0,
"MHS av": 3111.0421,
"MHS 5s": 3379.1931,
"Accepted": 1277,
"Rejected": 0,
"Hardware Errors": 0,
"Utility": 103.2529,
"Last Share Pool": 1,
"Last Share Time": 1533397884,
"Total MH": 2308584.7347,
"Diff1 Work": 158691.497589,
"Difficulty Accepted": 130197.14096064,
"Difficulty Rejected": 0.0,
"Last Share Difficulty": 149.66147328,
"No Device": false,
"Last Valid Work": 1533397884,
"Device Hardware%": 0.0,
"Device Rejected%": 0.0,
"Device Elapsed": 742
},
{
"ASC": 1,
"Name": "BKLU",
"ID": 1,
"Enabled": "Y",
"Status": "Alive",
"Temperature": 47.0,
"MHS av": 3091.0,
"MHS 5s": 3379.2005,
"Accepted": 1262,
"Rejected": 0,
"Hardware Errors": 0,
"Utility": 102.0401,
"Last Share Pool": 1,
"Last Share Time": 1533397884,
"Total MH": 2293712.1997,
"Diff1 Work": 158618.478538,
"Difficulty Accepted": 127321.87427328,
"Difficulty Rejected": 0.0,
"Last Share Difficulty": 149.66147328,
"No Device": false,
"Last Valid Work": 1533397884,
"Device Hardware%": 0.0,
"Device Rejected%": 0.0,
"Device Elapsed": 742
},
{
"ASC": 2,
"Name": "BKLU",
"ID": 2,
"Enabled": "Y",
"Status": "Alive",
"Temperature": 46.0,
"MHS av": 3090.5468,
"MHS 5s": 3379.1582,
"Accepted": 1270,
"Rejected": 0,
"Hardware Errors": 0,
"Utility": 102.6869,
"Last Share Pool": 1,
"Last Share Time": 1533397882,
"Total MH": 2293375.913,
"Diff1 Work": 161574.95538,
"Difficulty Accepted": 128734.96687936,
"Difficulty Rejected": 0.0,
"Last Share Difficulty": 149.66147328,
"No Device": false,
"Last Valid Work": 1533397884,
"Device Hardware%": 0.0,
"Device Rejected%": 0.0,
"Device Elapsed": 742
}
],
"id": 1
}
API command: pools
{
"STATUS": [
{
"STATUS": "S",
"When": 1533397884,
"Code": 7,
"Msg": "8 Pool(s)",
"Description": "sgminer 5.6.6-l"
}
],
"POOLS": [
{
"POOL": 0,
"Name": "hub.miningpoolhub.com",
"URL": "stratum+tcp://hub.miningpoolhub.com:17016",
"Profile": "",
"Algorithm": "skein-sha256",
"Algorithm Type": "Skeincoin",
"Description": "",
"Status": "Alive",
"Priority": 3,
"Quota": 1,
"Long Poll": "N",
"Getworks": 5,
"Accepted": 10,
"Rejected": 0,
"Works": 379,
"Discarded": 72,
"Stale": 0,
"Get Failures": 0,
"Remote Failures": 0,
"User": "ZZZZZZZZZZZZZZZZZZZZZZZ",
"Last Share Time": 1533397250,
"Diff1 Shares": 159.83552,
"Proxy Type": "",
"Proxy": "",
"Difficulty Accepted": 159.83552,
"Difficulty Rejected": 0.0,
"Difficulty Stale": 0.0,
"Last Share Difficulty": 16.90568,
"Has Stratum": true,
"Stratum Active": false,
"Stratum URL": "",
"Has GBT": false,
"Best Share": 186.11316,
"Pool Rejected%": 0.0,
"Pool Stale%": 0.0
},
{
"POOL": 1,
"Name": "hub.miningpoolhub.com",
"URL": "stratum+tcp://hub.miningpoolhub.com:17014",
"Profile": "",
"Algorithm": "qubit",
"Algorithm Type": "Qubit",
"Description": "",
"Status": "Alive",
"Priority": 0,
"Quota": 1,
"Long Poll": "N",
"Getworks": 32,
"Accepted": 3788,
"Rejected": 0,
"Works": 1921,
"Discarded": 364,
"Stale": 18,
"Get Failures": 0,
"Remote Failures": 0,
"User": "ZZZZZZZZZZZZZZZZZZZZZZZZ",
"Last Share Time": 1533397884,
"Diff1 Shares": 478192.615987,
"Proxy Type": "",
"Proxy": "",
"Difficulty Accepted": 385643.58659327,
"Difficulty Rejected": 0.0,
"Difficulty Stale": 1981.00918272,
"Last Share Difficulty": 149.66147328,
"Has Stratum": true,
"Stratum Active": true,
"Stratum URL": "hub.miningpoolhub.com",
"Has GBT": false,
"Best Share": 1860019.542141,
"Pool Rejected%": 0.0,
"Pool Stale%": 0.5111
}
],
"id": 1
}
API command: stats
{
"STATUS": [
{
"STATUS": "S",
"When": 1533397884,
"Code": 70,
"Msg": "sgminer stats",
"Description": "sgminer 5.6.6-l"
}
],
"STATS": [
{
"STATS": 0,
"ID": "BKLU0",
"Elapsed": 742,
"Calls": 0,
"Wait": 0.0,
"Max": 0.0,
"Min": 99999999.0,
"Chip Count": 64,
"Clock": 300,
"HWV": 29297,
"FWV": 7500055,
"Algo": "Qubit",
"USB Pipe": "0",
"USB Delay": "r0 0.000000 w0 0.000000",
"USB tmo": "341199 0"
},
{
"STATS": 1,
"ID": "BKLU1",
"Elapsed": 742,
"Calls": 0,
"Wait": 0.0,
"Max": 0.0,
"Min": 99999999.0,
"Chip Count": 64,
"Clock": 300,
"HWV": 29297,
"FWV": 7500055,
"Algo": "Qubit",
"USB Pipe": "0",
"USB Delay": "r0 0.000000 w0 0.000000",
"USB tmo": "11 0"
},
{
"STATS": 2,
"ID": "BKLU2",
"Elapsed": 742,
"Calls": 0,
"Wait": 0.0,
"Max": 0.0,
"Min": 99999999.0,
"Chip Count": 64,
"Clock": 300,
"HWV": 29297,
"FWV": 7500055,
"Algo": "Qubit",
"USB Pipe": "0",
"USB Delay": "r0 0.000000 w0 0.000000",
"USB tmo": "11 0"
}
],
"id": 1
}
|
|
|
|
|
obm_dan
Member
Offline
Activity: 112
Merit: 13
|
|
August 04, 2018, 05:17:39 PM |
|
That is exactly what I need. Thank you so much!
I'm a man of my word - I said I will love you forever, so...I will officially love you forever. If times ever get tough, know that there's somebody out there thinking of you...and that's me.
|
|
|
|
|
|
GunsN
|
|
August 19, 2018, 06:26:06 PM |
|
Hello, which algo are you working your baikal now?
which one is more profitable?
|
♫ ♪ ♪ ♫ ♩
Trust Us
|
|
|
|
Allats
|
|
August 19, 2018, 06:49:38 PM |
|
Hello, which algo are you working your baikal now?
which one is more profitable?
Skein |
|
|
|
|
|
GunsN
|
|
August 19, 2018, 08:22:40 PM |
|
Hello, which algo are you working your baikal now?
which one is more profitable?
Skein which pool can you advise me? thanks |
♫ ♪ ♪ ♫ ♩
Trust Us
|
|
|
|
Allats
|
|
August 19, 2018, 08:23:26 PM |
|
Suprnova
|
|
|
|
|
Meteorite777
Jr. Member
Offline
Activity: 68
Merit: 6
|
|
September 07, 2018, 06:36:25 PM |
|
So I discovered one of my hashboards died last night on one of my two X10's. These are from the $1600 batch at end of May/start of July (5/26).
I noticed my hash was low on one rig consistently and it was only getting 3-3.5 GH/s on Skein; so I pulled up the web portal and noticed one hashboard was reading 49*C while the others were 35*C like normal. This 3rd board was actually submitting shares and and DOES somewhat hash; but only at 10% the speed of a normal board. So if the two other boards submit 50 shares the bad one will put out 3-5 maybe.
I soft-rebooted the miner a few times and the temp no longer gives any reading other than 0*C (wonder if it burned up?) I contacted support and since I'm just about 3 months old i'm out of warranty and pretty much SOL :/. I talked to a friendly tech on the phone who suggested I take it apart and switch the hasboards around but to no avail. They offered to sell me a new hashboard for around $300 or a new unit for $900 with $92 ship (so basically full retail for a replacement board).
The miner can still run with 2/3 of the hashboards but for a barely 3mo old unit @ $1600 + ship there's no way i'll ROI with only 2 boards and 3 GH/s.
I will take off the heatsink of the bad board later today and inspect for damage; I didn't see any when swapping the boards last night but I suppose it would most likely be under the heat sinks if there was any.
|
|
|
|
|
Little Girl 65
Newbie
Offline
Activity: 7
Merit: 0
|
|
September 08, 2018, 12:04:31 PM |
|
Hello, Anyone knows if is a good investment buy a Baikal X for this new price at the site, 999 usd  You can contact BAIKAL to get discount |
|
|
|
|
Andartis
Jr. Member
Offline
Activity: 306
Merit: 7
|
|
September 09, 2018, 10:31:08 AM |
|
Hello, Anyone knows if is a good investment buy a Baikal X for this new price at the site, 999 usd You can contact BAIKAL to get discount Yes, but how much discount do you get? Like 50$ per unit. |
|
|
|
|
Shorty2520
Member
Offline
Activity: 165
Merit: 11
|
|
September 14, 2018, 09:22:03 AM |
|
So I discovered one of my hashboards died last night on one of my two X10's. These are from the $1600 batch at end of May/start of July (5/26).
I noticed my hash was low on one rig consistently and it was only getting 3-3.5 GH/s on Skein; so I pulled up the web portal and noticed one hashboard was reading 49*C while the others were 35*C like normal. This 3rd board was actually submitting shares and and DOES somewhat hash; but only at 10% the speed of a normal board. So if the two other boards submit 50 shares the bad one will put out 3-5 maybe.
I soft-rebooted the miner a few times and the temp no longer gives any reading other than 0*C (wonder if it burned up?) I contacted support and since I'm just about 3 months old i'm out of warranty and pretty much SOL :/. I talked to a friendly tech on the phone who suggested I take it apart and switch the hasboards around but to no avail. They offered to sell me a new hashboard for around $300 or a new unit for $900 with $92 ship (so basically full retail for a replacement board).
The miner can still run with 2/3 of the hashboards but for a barely 3mo old unit @ $1600 + ship there's no way i'll ROI with only 2 boards and 3 GH/s.
I will take off the heatsink of the bad board later today and inspect for damage; I didn't see any when swapping the boards last night but I suppose it would most likely be under the heat sinks if there was any.
I got something like this with the hash board. It didn’t recognize all boards. Try to take off PSU for at least 30 minutes. Unplug all connections, clean it with air (sry don’t know the right word) from dust and then put it all together. Sometimes there is a mini gap and this causing some shit. Maybe you switched SD cards for new algos and left a gap. Also be aware of ESD you have to use gloves or use other things to connect to the ground. Otherwise you may killed it by yourself at switching sd cards. At the end you have maybe to switch off the whole power up to 5 times until all boards are shown correctly. I was about to order parts from them but got it this way working 2 times. One of my four is a little bitch, all other working fine. Greetings |
|
|
|
|
|
cryptonitro
|
|
September 15, 2018, 10:22:13 AM |
|
Hello, Anyone knows if is a good investment buy a Baikal X for this new price at the site, 999 usd You can contact BAIKAL to get discount Yes, but how much discount do you get? Like 50$ per unit. Heyy friends Mining on PoW is very dangerous to have ROI, with those hard times , Baikal annouced after last Algos , that they will be added new ones in futur , but that just a commercial move for hope to sell more miners, i was septic , now i 'm pretty sure there wil be no new algos. Most of miners moves now about PoS or MN , but be careful there is many many shitcoin and trash project with hudge ROI to magnet and scam new guys. Took time to find the good project, and run away from unknow team one, with standar roadmap, start with little amount on PoS on a new project or old one still here, learn and read about the project. If you haven't well known of how to install or maintain MN, or even if you cant buy all collateral there is some trust service and easy setup, to have a shared MN or staking on pool like Snode.co. They are actually on pre-sale phase , they decided to have a coin.(PoS-20%/MN-80%) You can learn more , and feel free to ask question on Snode DISCORD hereI never participate to promote a service or else, but sad to see so much people scammed by fake shared mn , fake admin on discords , (never trust private message even is the same same as admin.) Anyway trustless project as to be promoted for everyones keep safe!kiss |
The only project make me believe ... Holochain
|
|
|
hamakago
Newbie
Offline
Activity: 15
Merit: 0
|
|
September 20, 2018, 12:06:50 PM |
|
I bought bk-x from website ' http://www.baikalminer.com'. baikal sent me email about contract. but that company name is 'SKYSEA INTELLIGENT LIMITED'. and payment bank is 'DBS BANK' in Singapore. Is that correct? no scam? Is 'SKYSEA INTELLIGENT LIMITED' Baikal? should I pay money? |
|
|
|
|
kineda
Newbie
Offline
Activity: 51
Merit: 0
|
|
September 20, 2018, 12:35:04 PM |
|
I bought bk-x from website ' http://www.baikalminer.com'. baikal sent me email about contract. but that company name is 'SKYSEA INTELLIGENT LIMITED'. and payment bank is 'DBS BANK' in Singapore. Is that correct? no scam? Is 'SKYSEA INTELLIGENT LIMITED' Baikal? should I pay money? When i bought mine a month or 2 ago it was btc only direct to them. they provided the btc address and there was a couple hour window it was available |
|
|
|
|
bittawm
Legendary
Offline
Activity: 1894
Merit: 1087
|
|
October 18, 2018, 02:09:22 AM |
|
Selling one for $850 usd Inc Shipping
|
@bittawm is my real telegram
@bittawm is my real twitter
beware of impersonators
|
|
|
Andartis
Jr. Member
Offline
Activity: 306
Merit: 7
|
|
October 19, 2018, 12:47:25 AM |
|
Hey guys.
Do we know what the upcoming algos are? I read, that someone extracted it from the firmware but I can not find the post.
|
|
|
|
|
kineda
Newbie
Offline
Activity: 51
Merit: 0
|
|
October 19, 2018, 01:09:07 PM |
|
Hey guys.
Do we know what the upcoming algos are? I read, that someone extracted it from the firmware but I can not find the post.
groestl and keccak |
|
|
|
|
Big World
Newbie
Offline
Activity: 6
Merit: 0
|
|
October 23, 2018, 11:40:35 AM |
|
Hi,friends
I want to buy some BK-X , 820usd for one unit from baikal, is this a good price?
|
|
|
|
|
Klovezio
Member
Offline
Activity: 350
Merit: 11
|
|
October 23, 2018, 04:28:19 PM |
|
This miner is interesting. Has anyone already experienced it? How is he in action. What is the real payback?
|
|
|
|
|
arma33
Newbie
Offline
Activity: 42
Merit: 0
|
|
October 25, 2018, 05:16:11 PM |
|
Hello! I'd love to add support for Baikal miners to the miner monitoring project that I'm working on. Unfortunately, I don't have a Baikal miner to test with. Is there any way that I could get somebody to run the following commands and PM me the output? I'd love you forever. echo '{"command":"stats"}' | netcat <baikal_ip_here> 4028
echo '{"command":"pools"}' | netcat <baikal_ip_here> 4028
echo '{"command":"devs"}' | netcat <baikal_ip_here> 4028
I believe this is what you want: API command: devs
{
"STATUS": [
{
"STATUS": "S",
"When": 1533397884,
"Code": 9,
"Msg": "3 GPU(s)",
"Description": "sgminer 5.6.6-l"
}
],
"DEVS": [
{
"ASC": 0,
"Name": "BKLU",
"ID": 0,
"Enabled": "Y",
"Status": "Alive",
"Temperature": 47.0,
"MHS av": 3111.0421,
"MHS 5s": 3379.1931,
"Accepted": 1277,
"Rejected": 0,
"Hardware Errors": 0,
"Utility": 103.2529,
"Last Share Pool": 1,
"Last Share Time": 1533397884,
"Total MH": 2308584.7347,
"Diff1 Work": 158691.497589,
"Difficulty Accepted": 130197.14096064,
"Difficulty Rejected": 0.0,
"Last Share Difficulty": 149.66147328,
"No Device": false,
"Last Valid Work": 1533397884,
"Device Hardware%": 0.0,
"Device Rejected%": 0.0,
"Device Elapsed": 742
},
{
"ASC": 1,
"Name": "BKLU",
"ID": 1,
"Enabled": "Y",
"Status": "Alive",
"Temperature": 47.0,
"MHS av": 3091.0,
"MHS 5s": 3379.2005,
"Accepted": 1262,
"Rejected": 0,
"Hardware Errors": 0,
"Utility": 102.0401,
"Last Share Pool": 1,
"Last Share Time": 1533397884,
"Total MH": 2293712.1997,
"Diff1 Work": 158618.478538,
"Difficulty Accepted": 127321.87427328,
"Difficulty Rejected": 0.0,
"Last Share Difficulty": 149.66147328,
"No Device": false,
"Last Valid Work": 1533397884,
"Device Hardware%": 0.0,
"Device Rejected%": 0.0,
"Device Elapsed": 742
},
{
"ASC": 2,
"Name": "BKLU",
"ID": 2,
"Enabled": "Y",
"Status": "Alive",
"Temperature": 46.0,
"MHS av": 3090.5468,
"MHS 5s": 3379.1582,
"Accepted": 1270,
"Rejected": 0,
"Hardware Errors": 0,
"Utility": 102.6869,
"Last Share Pool": 1,
"Last Share Time": 1533397882,
"Total MH": 2293375.913,
"Diff1 Work": 161574.95538,
"Difficulty Accepted": 128734.96687936,
"Difficulty Rejected": 0.0,
"Last Share Difficulty": 149.66147328,
"No Device": false,
"Last Valid Work": 1533397884,
"Device Hardware%": 0.0,
"Device Rejected%": 0.0,
"Device Elapsed": 742
}
],
"id": 1
}
API command: pools
{
"STATUS": [
{
"STATUS": "S",
"When": 1533397884,
"Code": 7,
"Msg": "8 Pool(s)",
"Description": "sgminer 5.6.6-l"
}
],
"POOLS": [
{
"POOL": 0,
"Name": "hub.miningpoolhub.com",
"URL": "stratum+tcp://hub.miningpoolhub.com:17016",
"Profile": "",
"Algorithm": "skein-sha256",
"Algorithm Type": "Skeincoin",
"Description": "",
"Status": "Alive",
"Priority": 3,
"Quota": 1,
"Long Poll": "N",
"Getworks": 5,
"Accepted": 10,
"Rejected": 0,
"Works": 379,
"Discarded": 72,
"Stale": 0,
"Get Failures": 0,
"Remote Failures": 0,
"User": "ZZZZZZZZZZZZZZZZZZZZZZZ",
"Last Share Time": 1533397250,
"Diff1 Shares": 159.83552,
"Proxy Type": "",
"Proxy": "",
"Difficulty Accepted": 159.83552,
"Difficulty Rejected": 0.0,
"Difficulty Stale": 0.0,
"Last Share Difficulty": 16.90568,
"Has Stratum": true,
"Stratum Active": false,
"Stratum URL": "",
"Has GBT": false,
"Best Share": 186.11316,
"Pool Rejected%": 0.0,
"Pool Stale%": 0.0
},
{
"POOL": 1,
"Name": "hub.miningpoolhub.com",
"URL": "stratum+tcp://hub.miningpoolhub.com:17014",
"Profile": "",
"Algorithm": "qubit",
"Algorithm Type": "Qubit",
"Description": "",
"Status": "Alive",
"Priority": 0,
"Quota": 1,
"Long Poll": "N",
"Getworks": 32,
"Accepted": 3788,
"Rejected": 0,
"Works": 1921,
"Discarded": 364,
"Stale": 18,
"Get Failures": 0,
"Remote Failures": 0,
"User": "ZZZZZZZZZZZZZZZZZZZZZZZZ",
"Last Share Time": 1533397884,
"Diff1 Shares": 478192.615987,
"Proxy Type": "",
"Proxy": "",
"Difficulty Accepted": 385643.58659327,
"Difficulty Rejected": 0.0,
"Difficulty Stale": 1981.00918272,
"Last Share Difficulty": 149.66147328,
"Has Stratum": true,
"Stratum Active": true,
"Stratum URL": "hub.miningpoolhub.com",
"Has GBT": false,
"Best Share": 1860019.542141,
"Pool Rejected%": 0.0,
"Pool Stale%": 0.5111
}
],
"id": 1
}
API command: stats
{
"STATUS": [
{
"STATUS": "S",
"When": 1533397884,
"Code": 70,
"Msg": "sgminer stats",
"Description": "sgminer 5.6.6-l"
}
],
"STATS": [
{
"STATS": 0,
"ID": "BKLU0",
"Elapsed": 742,
"Calls": 0,
"Wait": 0.0,
"Max": 0.0,
"Min": 99999999.0,
"Chip Count": 64,
"Clock": 300,
"HWV": 29297,
"FWV": 7500055,
"Algo": "Qubit",
"USB Pipe": "0",
"USB Delay": "r0 0.000000 w0 0.000000",
"USB tmo": "341199 0"
},
{
"STATS": 1,
"ID": "BKLU1",
"Elapsed": 742,
"Calls": 0,
"Wait": 0.0,
"Max": 0.0,
"Min": 99999999.0,
"Chip Count": 64,
"Clock": 300,
"HWV": 29297,
"FWV": 7500055,
"Algo": "Qubit",
"USB Pipe": "0",
"USB Delay": "r0 0.000000 w0 0.000000",
"USB tmo": "11 0"
},
{
"STATS": 2,
"ID": "BKLU2",
"Elapsed": 742,
"Calls": 0,
"Wait": 0.0,
"Max": 0.0,
"Min": 99999999.0,
"Chip Count": 64,
"Clock": 300,
"HWV": 29297,
"FWV": 7500055,
"Algo": "Qubit",
"USB Pipe": "0",
"USB Delay": "r0 0.000000 w0 0.000000",
"USB tmo": "11 0"
}
],
"id": 1
}
Doesn't respond to commands.. No such file or directory |
|
|
|
|
|
