Baikal Giant X10

[bitcoinexplorer]

I was on Starpool the last 24 hours. I'm pretty happy with the outcome of 0.3 LTC. My miner had shares for all algos but X11. This is my password line:

c=LTC,quark=1,qubit=1,myr-gr=1,skein=0.5


I tried also single coin mining with nice profit on ALQO. I collected LIZ, LPA, ARGO and CURVE....lets see if I can sell them for a nice price.

All in all Starpool did a nice job for me.

Wow... are you sure its 0.3 LTC per X10 for 24 hours?

[crytotronik]

I was on Starpool the last 24 hours. I'm pretty happy with the outcome of 0.3 LTC. My miner had shares for all algos but X11. This is my password line:

c=LTC,quark=1,qubit=1,myr-gr=1,skein=0.5


I tried also single coin mining with nice profit on ALQO. I collected LIZ, LPA, ARGO and CURVE....lets see if I can sell them for a nice price.

All in all Starpool did a nice job for me.

Wow... are you sure its 0.3 LTC per X10 for 24 hours?

0.29364095 LTC to be more precise

Yes really! 24 hours on starpool. I will stay for some more days...

BTW: I have a lot of algo switches. Mining on skein also (dont forget the "=0.5" for skein). At the moment its on qubit.

[bitcoinexplorer]

I was on Starpool the last 24 hours. I'm pretty happy with the outcome of 0.3 LTC. My miner had shares for all algos but X11. This is my password line:

c=LTC,quark=1,qubit=1,myr-gr=1,skein=0.5


I tried also single coin mining with nice profit on ALQO. I collected LIZ, LPA, ARGO and CURVE....lets see if I can sell them for a nice price.

All in all Starpool did a nice job for me.

Wow... are you sure its 0.3 LTC per X10 for 24 hours?

0.29364095 LTC to be more precise

Yes really! 24 hours on starpool. I will stay for some more days...

BTW: I have a lot of algo switches. Mining on skein also (dont forget the "=0.5" for skein). At the moment its on qubit.

Thanks for your response,

please advise what port to use, i do understand that in c value i will use c=BTC,quark,qubit,myr-gr

stratum+tcp://<algo>.starpool.biz:<PORT>

[fuaimo3]

Starpool.

Need your advise. My hashrate dropped down from 50 to around 10GH/s. What might cause such a decrease?

Thanks

I spoke to the dev already you should see your hash rates fixed.

[bitcoinexplorer]

I was on Starpool the last 24 hours. I'm pretty happy with the outcome of 0.3 LTC. My miner had shares for all algos but X11. This is my password line:

c=LTC,quark=1,qubit=1,myr-gr=1,skein=0.5


I tried also single coin mining with nice profit on ALQO. I collected LIZ, LPA, ARGO and CURVE....lets see if I can sell them for a nice price.

All in all Starpool did a nice job for me.

Wow... are you sure its 0.3 LTC per X10 for 24 hours?

0.29364095 LTC to be more precise

Yes really! 24 hours on starpool. I will stay for some more days...

BTW: I have a lot of algo switches. Mining on skein also (dont forget the "=0.5" for skein). At the moment its on qubit.

Ok trying

stratum+tcp://all.starpool.biz
and in password c=LTC,quark=1,qubit=1,myr-gr=1,skein=0.5

But question is in X10 setting what algo do i choose because we must choose a algo!

Advise please, thank you.

[donifars]

Starpool.

Need your advise. My hashrate dropped down from 50 to around 10GH/s. What might cause such a decrease?

Thanks

I spoke to the dev already you should see your hash rates fixed.

Thanks a lot. The hash rate went up again, may I ask you how was it fixed?

[crytotronik]

I was on Starpool the last 24 hours. I'm pretty happy with the outcome of 0.3 LTC. My miner had shares for all algos but X11. This is my password line:

c=LTC,quark=1,qubit=1,myr-gr=1,skein=0.5


I tried also single coin mining with nice profit on ALQO. I collected LIZ, LPA, ARGO and CURVE....lets see if I can sell them for a nice price.

All in all Starpool did a nice job for me.

Wow... are you sure its 0.3 LTC per X10 for 24 hours?

0.29364095 LTC to be more precise

Yes really! 24 hours on starpool. I will stay for some more days...

BTW: I have a lot of algo switches. Mining on skein also (dont forget the "=0.5" for skein). At the moment its on qubit.

Ok trying

stratum+tcp://all.starpool.biz
and in password c=LTC,quark=1,qubit=1,myr-gr=1,skein=0.5

But question is in X10 setting what algo do i choose because we must choose a algo!

Advise please, thank you.

You have to create a line (entry for a pool) for each Algo.

Like this:

stratum+tcp://skein.starpool.biz:4933   
stratum+tcp://myr-gr.starpool.biz:5433   
stratum+tcp://qubit.starpool.biz:4733   
stratum+tcp://quark.starpool.biz:4033   

Password for all lines:

c=YOUR_PAYOUT_COIN,quark=1,qubit=1,myr-gr=1,skein=0.5

Payout in Litecoin (lower transaction fees) would be:

c=LTC,quark=1,qubit=1,myr-gr=1,skein=0.5


if you want to include power consumption also, change the numbers a bit to prefer myr-gr and skein.

c=LTC,quark=1,qubit=1,myr-gr=1.1,skein=0.6


Found out and researched by myself, without any guarantee

[bitcoinexplorer]

I was on Starpool the last 24 hours. I'm pretty happy with the outcome of 0.3 LTC. My miner had shares for all algos but X11. This is my password line:

c=LTC,quark=1,qubit=1,myr-gr=1,skein=0.5


I tried also single coin mining with nice profit on ALQO. I collected LIZ, LPA, ARGO and CURVE....lets see if I can sell them for a nice price.

All in all Starpool did a nice job for me.

Wow... are you sure its 0.3 LTC per X10 for 24 hours?

0.29364095 LTC to be more precise

Yes really! 24 hours on starpool. I will stay for some more days...

BTW: I have a lot of algo switches. Mining on skein also (dont forget the "=0.5" for skein). At the moment its on qubit.

Ok trying

stratum+tcp://all.starpool.biz
and in password c=LTC,quark=1,qubit=1,myr-gr=1,skein=0.5

But question is in X10 setting what algo do i choose because we must choose a algo!

Advise please, thank you.

You have to create a line (entry for a pool) for each Algo.

Like this:

stratum+tcp://skein.starpool.biz:4933   
stratum+tcp://myr-gr.starpool.biz:5433   
stratum+tcp://qubit.starpool.biz:4733   
stratum+tcp://quark.starpool.biz:4033   

Password for all lines:

c=YOUR_PAYOUT_COIN,quark=1,qubit=1,myr-gr=1,skein=0.5

Payout in Litecoin (lower transaction fees) would be:

c=LTC,quark=1,qubit=1,myr-gr=1,skein=0.5


if you want to include power consumption also, change the numbers a bit to prefer myr-gr and skein.

c=LTC,quark=1,qubit=1,myr-gr=1.1,skein=0.6


Found out and researched by myself, without any guarantee

Thank you ........
Should i give 0 priority to all?

[aerodynomic]

I was on Starpool the last 24 hours. I'm pretty happy with the outcome of 0.3 LTC. My miner had shares for all algos but X11. This is my password line:

c=LTC,quark=1,qubit=1,myr-gr=1,skein=0.5


I tried also single coin mining with nice profit on ALQO. I collected LIZ, LPA, ARGO and CURVE....lets see if I can sell them for a nice price.

All in all Starpool did a nice job for me.

Wow... are you sure its 0.3 LTC per X10 for 24 hours?

0.29364095 LTC to be more precise

Yes really! 24 hours on starpool. I will stay for some more days...

BTW: I have a lot of algo switches. Mining on skein also (dont forget the "=0.5" for skein). At the moment its on qubit.

Ok trying

stratum+tcp://all.starpool.biz
and in password c=LTC,quark=1,qubit=1,myr-gr=1,skein=0.5

But question is in X10 setting what algo do i choose because we must choose a algo!

Advise please, thank you.

You have to create a line (entry for a pool) for each Algo.

Like this:

stratum+tcp://skein.starpool.biz:4933   
stratum+tcp://myr-gr.starpool.biz:5433   
stratum+tcp://qubit.starpool.biz:4733   
stratum+tcp://quark.starpool.biz:4033   

Password for all lines:

c=YOUR_PAYOUT_COIN,quark=1,qubit=1,myr-gr=1,skein=0.5

Payout in Litecoin (lower transaction fees) would be:

c=LTC,quark=1,qubit=1,myr-gr=1,skein=0.5


if you want to include power consumption also, change the numbers a bit to prefer myr-gr and skein.

c=LTC,quark=1,qubit=1,myr-gr=1.1,skein=0.6


Found out and researched by myself, without any guarantee

Thank you ........
Should i give 0 priority to all?

Thanks very much for sharing this and congrats .3LTC  is like $63 USD. DO  you know if I am able to transfer to a coinbase LTC wallet? Also for priority I just set them in order ie 0, 1, 2, 3, 4 etc.. I found i had issues if all algo's were set to 0 priority

[crytotronik]

The Algo switching works like this:

You tell the pool, with password options, which algos you want. For your miner only 1 line in your pool list will be reachable. You should have no other pools than starpool in your list.

Lets say skein is the most profitable algo, then all other algos wont be reachable by your miner. So its mining on skein.
If skein is not the most profitable anymore, but quark, then the pool will not be reachable for skein anymore. But now its reachable at quark algo. So your miner switch to the next line in your pool list. Is the next line not quark but myr-gr, it will not be reachable also. Next line in your pool list is quark... and its reachable. So miner is working on quark now.

Quark not most profitable algo anymore: Pool will not answer for your quark line anymore. Miner switch to your next line. Is it correct algo, pool will answer and provide data. If its not correct Algo, pool wont answer and miner jumps to next pool line.

I hope I am right with this... Any other opinions? Please correct me if I'm wrong.

[cashen]

Just use Awesome miner.

[bitcoinexplorer]

I just tried but its just mining Qubit and showing 'dead' status for other algos, is it normal?

[crytotronik]

All good!

The others are "dead" because the pool wants you to mine on Qubit. If Qubit isnt the most profitable Algo anymore, Qubit will be "dead" and miner is switching to the next "undead".

Awesomeminer + Baikal X10? Possible?

[fuaimo3]

Is it better to get paid in LTC because of the lower transaction fees? I figured bitcoin has higher gain possibilities is why I choose the currency out of the choices.

[aerodynomic]

Just wondering, has anyone been able to find out from Baikal when they are relasing the 2 new Algorithms? Ive seen posts suggesting its  NIST5 and I emailed Baikal about it but havent heard anything back.

[Aimless]

The Algo switching works like this:

You tell the pool, with password options, which algos you want. For your miner only 1 line in your pool list will be reachable. You should have no other pools than starpool in your list.

Lets say skein is the most profitable algo, then all other algos wont be reachable by your miner. So its mining on skein.
If skein is not the most profitable anymore, but quark, then the pool will not be reachable for skein anymore. But now its reachable at quark algo. So your miner switch to the next line in your pool list. Is the next line not quark but myr-gr, it will not be reachable also. Next line in your pool list is quark... and its reachable. So miner is working on quark now.

Quark not most profitable algo anymore: Pool will not answer for your quark line anymore. Miner switch to your next line. Is it correct algo, pool will answer and provide data. If its not correct Algo, pool wont answer and miner jumps to next pool line.

I hope I am right with this... Any other opinions? Please correct me if I'm wrong.

for the username i.e. wallet address I assume you use a litecoin wallet address (although on the pool it says that you need a valid BTC address)?

[aerodynomic]

The Algo switching works like this:

You tell the pool, with password options, which algos you want. For your miner only 1 line in your pool list will be reachable. You should have no other pools than starpool in your list.

Lets say skein is the most profitable algo, then all other algos wont be reachable by your miner. So its mining on skein.
If skein is not the most profitable anymore, but quark, then the pool will not be reachable for skein anymore. But now its reachable at quark algo. So your miner switch to the next line in your pool list. Is the next line not quark but myr-gr, it will not be reachable also. Next line in your pool list is quark... and its reachable. So miner is working on quark now.

Quark not most profitable algo anymore: Pool will not answer for your quark line anymore. Miner switch to your next line. Is it correct algo, pool will answer and provide data. If its not correct Algo, pool wont answer and miner jumps to next pool line.

I hope I am right with this... Any other opinions? Please correct me if I'm wrong.

for the username i.e. wallet address I assume you use a litecoin wallet address (although on the pool it says that you need a valid BTC address)?

It depends on the currency you set in your password. My password now is c=LTC,quark=1,qubit=1,myr-gr=1,skein=0.5. So because I have c=LTC I am using an LTC wallet address as my username. If c=BTC then you would need to use a Bitcoin wallet address for your username.

[asgardcfr]

Thanks for starpool info
skein is most profitable in graphic but dead and use another algo :/

up :ok it's works but only use 5GH/s (50%)

[tomwrx]

Thanks for starpool info
skein is most profitable in graphic but dead and use another algo :/

up :ok it's works but only use 5GH/s (50%)

it should be like this, because x10 hash for skein algo is 5 Gh/s

[crytotronik]

Thanks for starpool info
skein is most profitable in graphic but dead and use another algo :/

up :ok it's works but only use 5GH/s (50%)

it should be like this, because x10 hash for skein algo is 5 Gh/s

Thats the reason why you should add "skein=0.5"

50% Hashrate on skein


This config should work on most multi-coin-pools.